Panasonic KX-TSC14B Multi-line Phn Lowp - Page 36

" Voice Mail Service Setting the Voice Mail Tone If your voice mail service sends a voice mail tone after a new message has finished recording, set to "ON". " " icon will flash on the display if a message was recorded in your mailbox. You will hear a series of voice mail tones then a dial tone after lifting the handset or pressing (SP-PHONE/HEADSET). (Contact your service provider about your service.) Set to "OFF" when: -you do not subscribe to a voice mail service. -your voice mail service does not send a voice mail tone, or -the unit is connected to a PBX. Your phone comes from the factory set to "ON". Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 Press (FUNCTION/EXIT). 2 Press (_) or (^) repeatedly until "VOICE MAIL TONE?" is displayed. 3 Press (fl) OK/EDIT. 4 Press (_) or (^) to select the desired line, "LINE1" or "LINE2". 5 Press (fl) OK/EDIT (NEXT key). 6 Press (_) or (^) to select the desired mode. 11:50AM11/24 SAVE AUTO# ? 11:50AM11/24 VOICE MAIL TONE? 11:50AM11/24 LINE 1 LINE1 1=NEXT 11:50AM11/24 LINE 2 LINE2 1=NEXT 11:50AM11/24 ON 1=SAVE 7 Press (fl) OK/EDIT (SAVE key). ≥A beep sounds and the setting is saved. ≥The display will return to step 2. To program the other line, start from step 3. To return to the standby mode, press (FUNCTION/EXIT). ≥You can exit the programming mode any time by pressing (FUNCTION/EXIT). 36