Panasonic KXTG2383B 2.4 Ghz Cordles Phon - Page 68

Troubleshooting Answering System Problem Cause & Remedy The Answering System is on, but incoming messages are not recorded. •The recording time is set to "Greeting only". Select "1 minute", "2 minutes" or "3 minutes" (p. 23). •Memory is full. Erase some, or all, of the messages (p. 51). " FULL " is displayed and the ANSWER ON indicator flashes rapidly, and no new messages are recorded. •Memory is full. Erase some, or all, of the messages (p. 51). You cannot access the Answering System from the base unit or the handset. •If more than one other user is using the handsets and base unit, you may not be able to access the Answering System. Try again later. •If the Answering System is responding to a call or another user is listening to messages in the Answering System, you cannot access the Answering System. Try again later. • While 2 other handsets are making a conference call, you cannot access the Answering System. Try again later. •Your handset is too far from the base unit. Move closer to the base unit. You cannot access the Answering System from a touch tone phone. •Make sure you enter the correct remote code (p. 55). •The Answering System may not respond if the tones are too short to activate the unit. Press each button firmly. •The Answering System is off. Turn it on (p. 57). During playback on the handset, incoming call tones are heard. When you play back messages or you turn the Answering System on, the unit announces the wrong day. •To answer the call, press or . For playback, start again from the beginning after hanging up. •The date may be set wrong. Adjust the date (p. 15). 68