Panasonic PTDS8500U PTDS8500U User Guide

Panasonic PTDS8500U - DLP PROJECTOR Manual

Get Panasonic PTDS8500U - DLP PROJECTOR PDF manuals and user guides
UPC - 885170010994
View all Panasonic PTDS8500U manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic PTDS8500U manual content summary:

  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 1
    Instructions Functional Manual DLP™ Based Projector Commercial Use Model No. PT-DZ8700U PT-DS8500U PT-DW8300U The projection lens is sold separately. Thank you for purchasing a Panasonic Projector. JJ Before operating this product, please read the instructions carefully and save this manual
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 2
    Panasonic DLP™ Based projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-DZ8700U/PT-DS8500U/PT operating and maintenance (servicing) instructions in the literature
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 3
    and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is Model Number: PT-DZ8700U/PT-DS8500U/PT-DW8300U Trade Name: Panasonic Responsible party: Panasonic Solutions Company Address: 3 Panasonic Way, Secaucus,
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 4
    (Æpage 110) Approx. 1 500 hours : PT-D7700U (two lamps LAMP POWER : [HIGH]) Approx. 3 000 hours : PT-DZ8700U (two lamps LAMP POWER : [HIGH]) JJQuick steps For details, see the corresponding pages. 1. Set up your projector. (Æpage 21) 2. Attach the projection lens. (Æpage 37) 3. Connect with other
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 5
    lens 37 Basic Operation Powering ON/OFF 38 Connecting the power cord 38 Powering up the projector 39 Making adjustment and selection 39 Powering off the projector 40 Direct power off function 40 Projecting 41 Selecting the input signal 41 How to adjust the focus, zoom and shift 41
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 6
    72 HDMI IN 73 SDI IN (PT-DZ8700/PT-DS8500 only 73 ON-SCREEN DISPLAY 73 BACK COLOR 74 STARTUP LOGO 74 FREEZE 74 PROJECTOR SETUP menu 75 PROJECTOR ID 75 INSTALLATION 75 HIGH ALTITUDE MODE 75 COOLING CONDITION 76 LAMP SELECT 76 LAMP RELAY 76 LAMP POWER 77 BRIGHTNESS CONTROL 77 STANDBY
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 7
    connections 95 Accessing from the Web browser 96 Maintenance Monitor Lamp indicators 107 Managing the indicated problems 107 Replacement 109 Before replacing the unit 109 Replacing the unit 109 Troubleshooting 112 Appendix Technical Information 114 PJLink protocol 114 Control commands
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 8
    accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector in these conditions objects on top of it or wrap it into a bundle. Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 9
    remodel or disassemble the projector. High voltages can cause fire or electric shocks. zz For any inspection, adjustment and repair work, please contact an Authorized Service Center. Do not project an image with the lens cover attached. Doing so can cause fire. When replacing the lamp, do not touch
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 10
    , do not rub your eyes. Rinse with clean water and seek medical advice immediately. Do not disassemble the lamp unit. If the lamp breaks, it could cause injury. Lamp replacement The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will result. zz
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 11
    gas has got into your eyes or mouth, seek medical advice immediately. zz Ask your dealer about replacing the lamp unit and check the inside of the projector. Cautions when transporting When transporting the projector or carrying it around, make sure that the lens cover is always in place, and remove
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 12
    projection lens, install the dust sponge attached to the projector. If the dust sponge is not installed, dust will be accumulated inside and can cause a trouble to observe this will result in malfunctions or the lamp life will be shortened. ■ See " TEMP Service Center for installation. 12 - ENGLISH
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 13
    longer screws are used for front feet. Length of front leg screw: 65 mm, Length of rear leg screw: 23 mm) zz When installing the projector with a method other than floor standing installing, do not adjust its angle with the adjustable feet. Doing so can break the set. Ceiling mounting screws
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 14
    by a malicious third party. „„Security instruction zz The connecting network must be secured password that is simple to guess. zz Panasonic and its affiliate companies would never directly inquire light from indoor lamps from shining onto the screen. zz Depending on where the projector is used,
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 15
    or anything else, this will be magnified and projected onto the screen. Please put the lens cover on the projector when you do not use it. „„Do not move the projector while it is operating or subject it to vibration or impact. The service life of its internal components will be shortened
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 16
    rope fixing screw (x2) AA/R6 batteries for remote control (x2) Lens fixing screw (x1) (XYN4+J18FJ) Attention zzAfter unpacking the projector, discard the power cord cap and packaging material properly. zzFor lost accessories, consult your dealer. zzThe part numbers of accessories and separately
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 17
    information. Makes the remote control available to control any ID projectors. (Æpage 20) Remove the batteries in the reverse order to setting. Returns to the standby mode. Pressing this button while projecting an image automatically corrects the picture positioning on the screen. While the
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 18
    the projector on/off. Remote control signal receptor Front leg adjusters Screw up/down to adjust the projection angle. JJRear view Air intake port Auto Cleaning Air intake port Filter (ACF) compartment (Æpage 109) JJBottom view Burglar hook port Û Air intake port Air exhaust port Lamp unit
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 19
    ON> button Starts the projection while in the standby mode. VIDEO Switches to VIDEO input. S-VIDEO Switches to S-VIDEO input. RGB1 Switches to RGB1 input. RGB2 Switches to RGB2 input. DVI-D/HDMI Switches to DVI-D or HDMI input. SDI Switches to SDI input. (PT-DZ8700U/PT-DS8500U only) JJTerminals on
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 20
    erased if the batteries of the remote control are left exhausted. When the batteries are replaced, set the same ID number again. zzThe ID number can be set to "ALL" or from "1" to "64". Note zzRefer to "PROJECTOR ID" of "PROJECTOR SETUP menu" (Æpage 75). Using a wired remote control When multiple
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 21
    Getting Started Setting up Projection method You can use the projector with any of the following 4 projection methods. To set the desired method in the projector. JJMounting on the ceiling and projecting from front JJSetting on a desk/floor and projecting from rear (Using translucent screen)
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 22
    the bottom edge of the projected image. (m) Diagonal length of the projection area (") ½½½ LW : Minimum distance LT : Maximum distance Attention zzBefore installing, please read "Precautions with regard to safety" (Æ pages 8 to 16) zzSpecial care should be used when DLP projectors are used in the
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 23
    Setting up JJProjected range using geometric adjustment (PT-DZ8700U/PT-DS8500U only) VERTICAL KEYSTONE (Side View) HORIZONTAL KEYSTONE (Top View) Screen Screen Getting Started VERTICAL ARC (Side View) L2 L2 : Projection distance R2 : Radius of the circle Screen HORIZONTAL ARC (Top View) L2
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 24
    Getting Started Setting up JJProjection distance by projection lens (for PT-DZ8700U) QQFor the screen aspect ratio of 16 : 10 (Unit : m) Lens type Model number of projection lens Throw ratio Û Screen dimensions Screen size (") Effective Effective height width (SH) (SW) 70 0.942 1.508 80
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 25
    24.49 Zoom lens ET-D75LE2 ET-D75LE3 ET-D75LE4 1.8-2.8 : 1 2.8-4.6 : 1 4.6-7.4 : 1 Projection distance (L) Min. (LW) Max. (LT) Min. (LW) Max. (LT) Min. (LW) 122.51 153.23 183.95 Lens type Model number of projection lens Throw ratio Û Screen dimensions Screen size (") Effective
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 26
    98 Zoom lens ET-D75LE2 ET-D75LE3 ET-D75LE4 ET-D75LE8 2.2-3.3 : 1 3.3-5.6 : 1 5.6-8.9 : 1 Projection distance (L) 8.8-16.5 : 1 Min. (LW) Max. (LT) Min. (LW) Max. (LT 98 168.81 202.65 Lens type Model number of projection lens Throw ratio Û Screen dimensions Screen size (") Effective
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 27
    Getting Started Setting up JJProjection distance by projection lens (for PT-DS8500U) QQFor the screen aspect ratio of 4 : 3 (Unit : m) Lens type Model number of projection lens Throw ratio Û Screen dimensions Screen size (") Effective Effective height width (SH) (SW) 70 1.067 1.422 80 1.
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 28
    69 Zoom lens ET-D75LE2 ET-D75LE3 ET-D75LE4 ET-D75LE8 2.0-3.0 : 1 3.0-5.0 : 1 5.0-8.0 : 1 Projection distance (L) 8.0-15.0 : 1 Min. (LW) Max. (LT) Min. (LW) Max. (LT 48 166.95 200.41 Lens type Model number of projection lens Throw ratio Û Screen dimensions Screen size (") Effective
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 29
    Getting Started Setting up JJProjection distance by projection lens (for PT-DW8300U) QQFor the screen aspect ratio of 16 : 9 (Unit : m) Lens type Model number of projection lens Throw ratio Û Screen dimensions Screen size (") Effective Effective height width (SH) (SW) 70 0.872 1.550 80
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 30
    11.11 13.91 16.71 19.51 22.31 27.92 33.52 Zoom lens ET-D75LE2 ET-D75LE3 ET-D75LE4 ET-D75LE8 2.7-4.1 : 1 4.1-6.9 : 1 6.9-11.0 : 1 Projection distance (L) 10.9-20.6 : 1 Min. (LW) Max. (LT) Min. (LW) Max. (LT) Min. (LW) Max. (LT) Min. (LW) Max. (LT) 3.86 4.42 4.98 5.55 6.67 8.36
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 31
    Started If the projector is used with a screen size not listed in this manual, check the diagonal dimension (inch) of your screen and calculate the projection distance using the following formulas. JJCalculation formulas for projection distance by lens types (for PT-DZ8700U) Zoom lens Model
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 32
    Getting Started Setting up JJCalculation formulas for projection distance by lens types (for PT-DS8500U) Zoom lens Model number of projection lens ET-D75LE1 ET-D75LE2 ET-D75LE3 ET-D75LE4 ET-D75LE8 ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 Throw ratio 1.5-2.0 : 1 2.0-3.0 : 1 3.0-5.0 : 1 5.0-8.0
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 33
    Setting up JJCalculation formulas for projection distance by lens types (for PT-DW8300U) Zoom lens Model number of projection lens ET-D75LE1 ET-D75LE2 up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle. Attention zzHeated air comes out of the
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 34
    Started Connections Before connection to the projector zzRead carefully the instruction manual for the device to be RGB2 IN> terminal Outside view Pin No. Signal names R/PR G/G SYNC/Y B/PB DDC data HD/SYNC VD DDC clock , : Not assigned - , , : GND terminals JJPin assignments and signal
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 35
    a built-in time base corrector (TBC) or use a TBC between the projector and the video deck. zzIf nonstandard burst signals are connected, the image may a cable that is not compliant with the HDMI standard may result in problems such as the image cutting out or not appearing. When connecting the 1
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 36
    zzThe DVI-D signal input terminal supports only a single link. zzFor input, do not input sync signals to the SYNC/HD and VD terminals. zzWhen using the DVI-D input, EDID that is not compliant with the HDMI standard may result in problems such as the image cutting out or not appearing. When
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 37
    lens (optional) Move the lens to the home position before replacing or removing the projection lens. (Æpage 43) How to install the projection lens 1111 Align the mark (orange) on the projection lens with the mark on the projector ( on the left side of LOCK), then insert the lens and turn
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 38
    Powering ON/OFF Connecting the power cord Be sure to Insert the attached power cord securely to its base to prevent it from coming off. Before connecting the power cord, confirm that the MAIN POWER switch is in the " " (OFF) position. JJInstallation Insert the plug securely until its right and
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 39
    41) 5555 Select and set the projection scheme of [INSTALLATION] and [COOLING CONDITION] settings in [PROJECTOR SETUP] menu. 6666 Select the input signal by pressing button (, , , , ). (SDI: PT-DZ8700U/ PT-DS8500U only) 7777 Adjust the tilt
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 40
    been cooled by the direct power off function, it sometimes takes longer than usual for the lamp to light up again. zzWhile the cooling fan is operating, do not place the projector inside a box or bag. zzIf projection was stopped by using the DIRECT POWER OFF function, it can be started by setting
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 41
    Check the connections of the peripheral devices, installation of the projection lens (Æpage 37), and connection of the power cord (Æpage 38) and switch on the power (Æpage 39) to start the projector. Select the input signal and adjust the image. Selecting the input signal Select an input
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 42
    12 V 0.12 V 0.44 V 0.12 V height, V Projected screen height, V Projected screen PT-DZ8700U PT-DS8500U Projected screen height, V 0.12 V 0.12 V 0.12 V Standard projection position 0.12 V 0.44 V 0.15 H 0.15 H Projected screen width, H 0.12 V Standard projection position 0.12 V 0.55
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 43
    for about 5 seconds.) zz[PROGRESS] will appear in the menu, and the projection lens will move to the home position. Attention zz[HOME POSITION] for the projection lens is the lens position when the lens is being replaced or when the projector is being stored away, and it is not the optical center of
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 44
    Projecting JJProcedure for adjusting the focus balance (tilt compensation in the lens mount) Three focus adjustment screws on the lens mount may be used to compensate
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 45
    Projecting If the lens is heavy or the projector is installed so that it is tilted, the lens may be and ET-D75LE8 optional lens. Figure 3 : Relation between the adjustment place and adjustment screw Projector Screen Adjustment place : The place where the just-in-focus point is at the back. When
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 46
    are being input and projected. button ON SCREEN TEST PATTERN STATUS ASPECT FUNCTION Using the SHUTTER function If the projector is not used SDI input. ½½½ SDI: PT-DZ8700U/PT-DS8500U only STATUS function Pressing this button displays several pages of projector status information. button Press
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 47
    have been shifted even when the adjustment ended normally. In this case, manually adjust the [CLOCK PHASE]. Refer to "CLOCK PHASE" of "POSITION menu PT-DZ8700U only Note zzRefer to "FUNCTION BUTTON" of "PROJECTOR SETUP menu" (Æpage 84) for details. Displaying the internal test pattern The projector
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 48
    Basic operations using the remote control Changing the picture aspect ratio You can toggle through an appropriate set of aspect ratios for a given input signal. button Press button on the remote control. zzThe setting will change as follows each time button is pressed. VID AUTO
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 49
    reset all the settings to the factory defaults, refer to "INITIALIZE" of "PROJECTOR SETUP menu" (Æ 86 page). zzSome menu items are not available to reset by pressing button. Adjust each menu item manually. zzThe triangle mark under the bar indicates factory default setting and the square
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 50
    items. When a main menu item is selected, the screen changes to a sub-menu selection screen. PICTURE POSITION ADVANCED MENU DISPLAY LANGUAGE DISPLAY OPTION PROJECTOR SETUP P IN P TEST PATTERN SIGNAL LIST SECURITY NETWORK SUB MENU The sub-menu screen of the selected main menu appears, and you can
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 51
    74 74 JJPROJECTOR SETUP[ ] Sub-menu item PROJECTOR ID INSTALLATION HIGH ALTITUDE MODE COOLING CONDITION LAMP SELECT LAMP RELAY LAMP POWER BRIGHTNESS CONTROL STANDBY MODE SCHEDULE RS-232C signal. ***** PT-DZ8700U/PT-DS8500U only ***** PT-DW8300U only ***** PT-DZ8700U only ENGLISH - 51 Settings
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 52
    Communication in Medicine", which is a standard for medical imaging devices. Although the name "DICOM" is used, this projector is not a medical device. Accordingly, do not use the projected images for medical diagnosis or similar usage. zzWhen button is pressed while a [PICTURE MODE] other
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 53
    31 Reduces the brightness of the dark (black) parts of the screen. Minimum value -31 COLOR You can adjust the color saturation of the projected image. 1111 Press ▲▼ to select [COLOR]. 2222 Press ◄► or button. zzThe [COLOR] individual adjustment screen will be displayed. 3333 Press ◄► to
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 54
    item only to the factory default setting. zzThe [COLOR TEMPERATURE] cannot be adjusted for the internal test pattern (Æpage 88). Be sure to project the input signal when adjusting the [COLOR TEMPERATURE]. JJChanging the name of [USER 1] or [USER 2] 111 Select [USER1] or [USER2] in step 3). 222
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 55
    Communication in Medicine", which is a standard for medical imaging devices. This projector is not a medical device. Do not use the displayed image for DAYLIGHT VIEW This corrects images so that they appear vivid when projected under bright lighting. 1111 Press ▲▼ to select [SYSTEM DAYLIGHT
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 56
    PICTURE menu SHARPNESS This adjusts the sharpness of the pictures. 1111 Press ▲▼ to select [SHARPNESS]. 2222 Press ◄► or button. zzThe [SHARPNESS] individual adjustment screen will be displayed. 3333 Press ◄► to adjust the level. Operation Press ►. Press ◄. Adjustment Contours become
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 57
    projector to automatically recognize input signals. Furthermore, if unstable signals are input, the system format can be selected manually . zzMalfunction may occur or other problems could be encountered with some equipment. JJSDI terminal input signal (PT-DZ8700U/PT-DS8500U only) zzSelect from AUTO,
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 58
    This function allows the user to adjust the raster position vertically or horizontally if the position of the image projected on the screen is displaced even when the projector is properly aligned with the screen, and the internal test patterns are correctly framed. 1111 Press ▲▼ to select [SHIFT
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 59
    careful of this when selecting the aspect ratio. zzIf using this projector in places such as cafes or hotels to display programs for format intended by the creator of the pictures. ZOOM This adjusts the size of the projected pictures. 1111 Press ▲▼ to select [ZOOM]. 2222 Press button. zzThe
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 60
    (PT-DZ8700/PT-DS8500 only) Square video can be projected onto projected images when they are distorted to a curved surface. This is for performing geometry correction from a computer. ½½½ GEOMETRY adjustment should be carried out by a person who is familiar with the projector or by a service
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 61
    zzVERTICAL ARC zzHORIZONTAL ARC zzVERTICAL BALANCE zzHORIZONTAL BALANCE Note zzWhen [GEOMETRY] setting is set, displayed menu or startup logo might be projected outside of the actual image area. zzIf both [EDGE BLENDING] (Æpage 64) adjustment and [GEOMETRY] correction are used, [EDGE BLENDING
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 62
    POSITION menu KEYSTONE (PT-DW8300 only) If the projector is aligned non-perpendicularly to the screen, or if the projection screen has an angled surface, you can correct keystone. 1111 Press ▲▼ to select [KEYSTONE]. 2222 Press button. 3333 Select the desired adjustment item. 4444
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 63
    not a 2 : 2 pulldown signal. BLANKING Blanking adjustment fine-tunes the images projected by the video deck or other devices when the noise appears on the edges of 4444 Press ◄► to adjust blanking. zzThe adjustment value for the PT-DZ8700U can be changed within a range of 0 to 599 vertically and
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 64
    the default linear blending ramps are sufficient. When a user-defined blending ramp is required. These ramps can be defined and uploaded to the projector through the RS-232 port. Consult your dealer for details. 3333 Press button. zzThe [EDGE BLENDING] screen will be displayed. 4444 Press
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 65
    the green line of the other frame. The blending widths of each projector must be set to the same value. Optimal blending cannot be achieved Press ▲▼ to select an item, and press ◄► to adjust the setting. Projection range BRIGHT adjustment (right) Edge blending width (right) MAKER BRIGHT BLENDING
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 66
    ADVANCED MENU FRAME DELAY When 1 080/60i, 1 080/50i and 1 080/24sF signals are being input, this simplifies image processing so that the video frame delay is shortened. 1111 Press ▲▼ to select [FRAME DELAY]. 2222 Press ◄► to switch [FRAME DELAY]. zzThe setting will change as follows each time ◄►
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 67
    languages are: English, German (DEUTSCH), French (FRANÇAIS), Spanish (ESPAÑOL), Italian (ITALIANO), Japanese ( ), Chinese ( ), Russian and Korean ( ). Note zzThe on-screen display of the projector is set to the English language on shipping. Settings ENGLISH - 67
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 68
    is added to or reduced from the adjustment color. zzThis adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is required to make successful adjustment. zzPressing button will restore the factory defaults for
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 69
    each time ◄► is pressed. OFF (No correction) 1 (Low) 2 (High) SCREEN SETTING (PT-DZ8700/PT-DS8500 only) Set this in accordance with the screen you are using. When the projection image aspect ratio is changed, the projector makes corrections to ensure the optimal images for the set screen size
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 70
    PT-DZ8700U) or [4 : 3] (PT-DS8500U). WAVEFORM MONITOR (PT-DZ8700 only) This function displays the waveform of the input signal from a connected peripheral device. You can check if the image output (BRIGHTNESS) signal level is within the range recommended by this projector the waveform Project the
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 71
    SIGNAL]. zzThe setting will change as follows each time ◄► is pressed. OFF ON OFF ON Only when button is pressed, the projected image position will be adjusted. If unregistered signals are input when [ON] is selected, auto setup will be initiated automatically. AUTO SETUP Use this
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 72
    Input impedance is set to [LOW]. Input impedance is set to [HIGH]. DVI-D IN Change this setting if video does not display normally when the projector and an external device are connected via DVI. 1111 Press ▲▼ to select [DVI-D IN]. 2222 Press button. zzThe [DVI-D IN] screen will be
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 73
    depending on the output setting of the connected external device. Refer to the instruction manual for the external device. zzThe displayed HDMI signal level is the value when the input is 30 bit. SDI IN (PT-DZ8700/PT-DS8500 only) You can select signal amplitude type. Available with YPBPR or RGB
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 74
    temporarily unless the projector switched off. ON OFF JJINPUT GUIDE This sets whether to display the currently selected input guide at the NONE LOGO1 The Panasonic logo is projected. No startup logo is projected. The picture registered by the user will be projected. Note zzSeparate software
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 75
    with other ID numbers. For details on remote control ID setting, refer to "Setting projector ID number to remote control" (Æpage 20). INSTALLATION A projection scheme can be chosen depending on the installation of the projector. If the picture is shown upside down or in reverse, change the
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 76
    that has failed to light White→Any other status zzIf the projector is repeatedly used for short periods of time, the lamps will need to be replaced more frequently. LAMP RELAY If using the projector for a continuous period of 24 hours or more, this setting can be used to automatically switch the
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 77
    control. zzIf the filter is running low, only one lamp will light even when [DUAL] is selected. The lamps will light as normal once the filter has been replaced and the residual filter has been reset. LAMP POWER The luminance of the projection lamp can be changed depending on user's needs or the
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 78
    sticking to the lens, screen, or inside of the projector, depending on the environment in which the projector has been installed. zzIf the brightness fluctuates significantly because of aging of the lamp or if the lamp has been replaced, re-adjust the brightness control. JJBRIGHTNESS CONTROL STATUS
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 79
    PROJECTOR3 192.168. 0. 10 3: 4: 5: 6: 7: UPDATE MENU SELECT The group to be linked is displayed. The name and IP address of this projector are displayed. The projector name and IP address of the same group detected through the network are displayed. The state is indicated by color. GREEN
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 80
    to the hub using the LAN cables. (Æpage 5) 2222 Turn on the power in all projectors. 3333 Ensure [LAMP SELECT] of all the projectors are either all set to [DUAL] or all set to [SINGLE]. 4444 Set [MODE] of [BRIGHTNESS CONTROL SETUP] to [OFF], and select [APPLY]. 5555 Set [
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 81
    projectors and press button. zzBrightness control will commence. Note zzThe brightness is corrected automatically each time the lamps are turned on using the power switch etc. zzIf the brightness fluctuates significantly or the lamp has been replaced on the projector, projection will start
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 82
    PROJECTOR SETUP menu 4444 Press ▲▼ to select [TIME] or [COMMAND] and change the setting according to the instructions PT-DZ8700U/PT-DS8500U only 5555 Press ▲▼ to select [STORE] and press button. Note zzIf you try to register a setting that would cause the lamp L6500 SERIES DZ8700 Series,
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 83
    the intake air temperature of the projector. Displays the temperature inside the projector. Displays the temperature around the lamp of the projector. Displays the filter remaining quantity. Displays type of projector. Displays the serial number of the projector. LAMP UNIT MODEL NO. LAMP1 SERIAL
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 84
    the image. WAVEFORM Displays the waveform of the input MONITOR Û signal. ½½½ PT-DZ8700U only 4444 Press button. DATE AND TIME This lets you set the time zone and the current date and time for the projector's internal clock. JJSetting the TIME ZONE 1111 Press ▲▼ to select [DATE AND
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 85
    server is not set, [NTP SYNCHRONIZATION] will return to [OFF]. zzAccess the projector via a web browser to set the NTP server. (Æpage 106) LENS CALIBRATION , a message [INCOMPLETE] will appear. FILTER COUNTER RESET After you replaced the Auto Cleaning Filter (ACF), [REMAINING FILTER] of [STATUS]
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 86
    DATA This loads various setting values that were saved as a backup to the internal memory of the projector. 1111 Press ▲▼ to select [LOAD ALL USER DATA]. 2222 Press button. zzThe [SECURITY . 6666 Press ◄► to select [OK], and press button. SERVICE PASSWORD This function is used by
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 87
    zzSee "Navigating through the menu" (Æpage 49). zzSee "MAIN MENU" and "SUB MENU" (Æpage 50). Using the P IN P function Two videos can be projected simultaneously by placing a separate small sub screen within the main screen. 1111 Press ▲▼ to select [P IN P]. 2222 Press button. zzThe [P IN
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 88
    TEST PATTERN menu zzSee "Navigating through the menu" (Æpage 49). zzSee "MAIN MENU" and "SUB MENU" (Æpage 50). Settings TEST PATTERN Results of adjustment of the position, size and other factors are not reflected in test patterns. Ensure the input signal is displayed before performing various
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 89
    When the address number (A1, A2, ...H7, H8) signal is registered Registering a signal to the list When a new format input signal is applied to the projector, press button to register to the SIGNAL LIST. Note zzYou can register data up to 96 in total number of the signal data and
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 90
    TEST PATTERN menu Managing the sub memory list You can restore the sub memory data when using signals from the same input source. Sub memory data contains the setting information of screen and image adjustments, such as BRIGHTNESS, CONTRAST or ASPECT. JJRegistering the current settings to the list
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 91
    SECURITY menu zzSee "Navigating through the menu" (Æpage 49). zzSee "MAIN MENU" and "SUB MENU" (Æpage 50). zzWhen you apply to the [SECURITY] menu before you change the password to your original, perform to input the following factory default password operation. Press and button.
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 92
    is enabled. The picture registered by the user will be projected. Note zzSeparate software [Logo Transfer Software] is required in order OFF] by default and when initialized. zzThe unlock state is maintained until the projector is set to the standby mode. MENU LOCK PASSWORD You can change the
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 93
    confirmation screen will be displayed. 6666 Press ◄► to select [OK], and press button. Note zzIf an attempt is made to control the projector from the remote control or main unit controls when [DISABLE] is set, the [SECURITY PASSWORD] screen appears. To change a setting, enter the security
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 94
    Press button. zzThe [NETWORK SETUP] screen will be displayed. 3333 Press ▲▼ to select an item, and change the setting according to the instructions. PROJECTOR NAME (Display of host name and setting) Change as needed when using a DHCP server. DHCP (DHCP client function) Set [DHCP] item to
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 95
    problem with the projector Note zzA LAN cable is required to use the network function. Computer Projector . zzUse a straight insulated LAN cable which supports category 5 or above. zzThe length of function of network function parts Settings LAN LINK/ACT lamp (green) This lights when a LAN cable is
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 96
    factory default settings are user1 (user privileges) or admin1 (administrator privileges) for the user name and panasonic (lowercase letters) for the password. 4444 Click [OK] to display the Projector status page. Note zzAvoid activating two or more Web browser simultaneously to work out setting or
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 97
    JJChange Password page Click [Change password]. NETWORK menu Administrator User QQAdministrator mode zzAdministrator account zzUser account QQUser mode A user can change password only. Account Current user name input field Current password input field New user name input field New password input
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 98
    . This displays the on-screen status. It is displayed even if the on-screen display of the projector is set to off. Monitor information button Click this item, and the status of the projector is displayed. Detailed set up button Click this item to display the advanced settings page. Change password
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 99
    main unit. Displays the input switching status. Displays temperature of projector's intake air. Displays temperature inside the projector. Displays the AROUND LAMP TEMPERATURE. Displays the lamp lit hours. Displays the REMAINING FILTER QUANTITY. Displays self-diagnosis information. Displays
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 100
    may be that the projector's ventilation holes are blocked. The lamp runtime has exceeded the prescribed cumulative time, and it is now time to replace the lamp. The lamp has failed to light. Wait a short while for the lamp to cool off, and then turn on the power. Trouble has occurred in the contrast
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 101
    NETWORK menu JJE-mail setup page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an self-diagnosis. LAMP1 RUNTIME: remaining lamp service time has reached the value set in the field. LAMP2 RUNTIME: remaining lamp service time has reached the value set in
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 102
    NETWORK menu Check these boxes when E-mail is to be sent periodically to the second E-mail address. E-mail will be sent at the times and on the days checked. 102 - ENGLISH Settings
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 103
    Select [NORMAL] or [SIMPLE]. ERROR: an error is detected by self-diagnosis. LAMP1 RUNTIME: remaining lamp service time has reached the value set in the field. LAMP2 RUNTIME: remaining lamp service time has reached the value set in the field. FILTER REMAIN: INPUT AIR TEMPERATURE: intake air
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 104
    set up], then [Authentication set up] to display the Authentication server setup page. Settings Select the authentication method specified by your Internet service provider. Set this if SMTP authentication has been selected. POP server name field Available input characters: Alphanumeric characters
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 105
    NETWORK menu JJContents of mail sent QQMail with the contents shown below is sent when the E-mail settings have been established. QQMail with the contents shown below is sent when an error has occurred. ENGLISH - 105 Settings
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 106
    clicked, the current settings are displayed. zzIf the [Change] button is clicked, the following setting change screen is displayed. Settings Enter the name of the projector here. Enter the host name here if it is required when the DHCP server is going to be used, for instance. Set this to ON
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 107
    ] is selected when turning on the projector as the [LAMP POWER] setting). power supply? zzRequest the dealer to replace the lamp unit. Blinking in red Lamp unit is not zzCheck the lamp unit (once) installed. compartment. zzInstall the lamp unit. zzWhen lamp unit is installed and still having
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 108
    40 and replace the ACF unit. zzTurn off the MAIN POWER switch - using the procedure on page 40 and consult the dealer. Note zzIf no problem is found or the problem remains, do not turn on the projector. Instead contact your dealer. JJFILTER indicator Lamp indication Information Lighting
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 109
    remaining amount of the ACF unit in [REMAINING FILTER] of [STATUS] in PROJECTOR SETUP menu. (Æpage 83) zzContact an Authorized Service Center to purchase a Replacement filter unit (ET-ACF310). JJProcedure of ACF unit replacement 1111 Loosen "ACF cover fixing screw" (1 screw) until the screws turn
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 110
    . zzPhillips screwdriver is necessary when replacing a lamp unit. zzWhen replacing the lamp unit, be sure to hold it by the handle. zzThe lamp may burst. Replace the lamp unit carefully so that the broken pieces of the lamp glass will not scatter. When the projector is mounted on the ceiling, do
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 111
    installation guide Lamp unit cover fixing screw 3333 Use a Phillips screwdriver to loosen the "Lamp unit cover fixing screw" (4 screws) for the lamp unit to be replaced until the screws turn freely. Hold the "Handle" of the "Lamp unit" and gently pull the lamp unit out from the projector. Lamp
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 112
    Troubleshooting Should any problem persist, contact your dealer. Problem Cause zzThe power cord may not be may be at the minimum setting. zzThe input source which is connected to the projector may have a problem. zzThe [SHUTTER] function may be in use. zzIf the [Power indicator] flashes
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 113
    Troubleshooting Problem Cause Reference page zzThe cable may be longer than the optional cable. - switching [DVI-D IN] 72 setting in [DISPLAY OPTION] menu of the projector correctly. Projection suddenly became darker. zzHas the filter been used up? (When the filter has been used up,
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 114
    time 4th digit : 0 = Lamp 2 off, 1 = Lamp 2 on The following are returned as parameters. "11 12 21 22 31 32" (PT-DW8300U only) "11 12 21 22 31 32 33" (PT-DZ8700U/PT-DS8500U only) The name set for [PROJECTOR NAME] in [NETWORK SETUP] is returned. "Panasonic" is returned. "DZ8700", "DS8500" or "DW8300
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 115
    NETWORK] ⇒ [NETWORK CONTROL] ⇒ [COMMAND PORT] 2222 There is a response from the projector. Response data Data section "NTCONTROL" (ASCII string) 9 bytes Blank ' ' 0x20 1 of above administrator rights user (Default password is "panasonic") 8-byte random number obtained in Step 2)
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 116
    ] ⇒ [NETWORK STATUS] Port number : Obtain from MAIN MENU ⇒ [NETWORK] ⇒ [NETWORK CONTROL] ⇒ [COMMAND PORT] 2222 There is a response from the projector. Response data Data section "NTCONTROL" (ASCII string) 9 bytes Blank ' ' 0x20 1 byte Mode '0' 0x30 1 byte Termination symbol (CR) 0x0d 1 byte
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 117
    by a personal computer which is connected to this connector. JJConnection ●Single projector Connecting terminals on projector D-Sub 9-pin (female) Computer ●Multiple projectors Connecting terminals on projector 1 Computer D-Sub 9-pin D-Sub 9-pin (female) (male) Connecting terminals on
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 118
    command can be sent or received for 60 seconds after the lamp starts lighting. Try sending any command after that period has the projector to the personal computer. zzWhen the wrong parameter is sent, the [ER402] status is sent from the projector to the personal computer. zzProjector ID supported on
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 119
    ) JJControl commands When controlling the projector from a computer, the following commands are available: Command PON POF SDI = SDI (PT-DZ8700U/PT-DS8500U only) HD1 = HDMI 0 = DUAL 1 = SINGLE 2 = LAMP1 3 = LAMP2 Û [SINGLE] will use the lamp (LAMP1 or LAMP2)
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 120
    where infrared remote control signal cannot be received. Remote control External control Remote control/External control Standby ON LAMP RGB1 VIDEO RGB2 S-VIDEO Projector set up in a meeting room DVI-D Control panel located in a different room JJPin assignments and control D-Sub 9-pin
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 121
    (1 920 × 1 200) non-interlace signal, Dot clock frequency : 25 MHz - 162 MHz (The WUXGA signals support only VESA CVT-RB (Reduced Blanking) signals.) ***** PT-DZ8700U/PT-DS8500U only Note zzIf the horizontal resolution of the input signal of the sub window is 1 280 pixels or above, the picture
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 122
    Information List of compatible signals The following table specifies the types of signals compatible with the projector. Format : V = VIDEO, S = S-VIDEO, D = DVI, H : HDMI D/H/R D/H/R D/H/R D/H/R D/H/R D/H/R D/H/R D/H/R D/H/R D/H/R D/H/R D/H/R ½½½ PT-DZ8700U/PT-DS8500U only 122 - ENGLISH
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 123
    WUXGA projector appear to have same resolution. ***** If a signal of 1 125 (1 035)/60i is input, it will be displayed as a signal of 1 125 (1 080)/60i. ***** VESA CVT-RB (Reduced Blanking) compatible. ***** PT-DW8300U only ***** PT-DZ8700U only ***** Some loss of data occurs to make projection
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 124
    chip, DLP type 1 470 000 pixels (1 400 × 1 050 dots) × 3 1 049 088 pixels (1 366 × 768 dots) × 3 Lens Option Projection lamp 2 bulbs × 355 W UHM lamp Optical output *1 10 600 lm (ANSI) 9 600 lm (ANSI) For RGB signal H : 15 kHz - 100 kHz, V : 24 Hz - 120 Hz PIAS (Panasonic Intelligent Auto
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 125
    Projection lens Options Lens Motor Cover Replacement Lamp Unit Replacement filter unit Smoke Cut Filter Frame PT-DZ8700U PT-DS8500U PT-DW8300U is the average value. It may differ depending on each product. ***** When using this projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft)
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 126
    Interface are the trademarks or registered trademarks of HDMI Licensing LLC. zzOther types of names such as company names and product names appearing in this instruction manual are trademarks or registered trademarks of their respective holders. The ® and TM marks are not indicated in this
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 127
    as a result of using a ceiling mount bracket not manufactured by Panasonic, or if damage to the projector occurs as a result of an inappropriate location used for installing the ceiling mount bracket, even if the projector's warranty period has not yet expired. zzUse a torque screwdriver or similar
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 128
    39 Precautions with regard to safety......8 Projecting 41 Projection lens 37 Projection method 21 Projector body 18 PROJECTOR ID 75 PROJECTOR SETUP menu...........75 R RASTER POSITION 66 REMOTE 2 IN terminal 120 REMOTE2 MODE 84 Remote control 17 Replacement 109 RGB IN 72 RS-232C 82
  • Panasonic PTDS8500U | PTDS8500U User Guide - Page 129
    apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2010 Panasonic Solutions Company 3 Panasonic Way, Secaucus, NJ 07094 TEL: (877) 803 - 8492 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 TEL: (905
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
Operating Instructions
Functional Manual
DLP™ Based Projector
Commercial Use
Thank you for purchasing a Panasonic Projector.
Before operating this product, please read the instructions carefully and save this manual
J
for future use.
Before using your projector, be sure to read “
J
Precautions with regard to safety”
(
Æ
pages 8 to 16).
TQBJ0341
Model No.
PT-DZ8700U
PT-DS8500U
PT-DW8300U
ENGLISH
The projection lens is sold separately.