Panasonic PV-L452 Vhs-c - Page 10
Battery Care, AC Adaptor, Car Battery Cord Optional, CAUTION - drivers
UPC - 037988976874
View all Panasonic PV-L452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Supplying Power Battery Care Caution: • Charge only with specified charger. • Battery can be charged within a temperature range of 10 °C (50 °F) and 35 °C (95 °F). • Battery is normally warm after charging or just after use. • Do not use an insufficiently charged or worn-out Battery. Safety precautions: • Do not get Battery near, or dispose of in, fire. • Do not directly connect (short circuit) the positive (+) and negative (-) terminals. • Never attempt to disassemble or reassemble Battery. To avoid Battery damage: • Do not drop or jar Battery. • Use Battery with specified units only. • If Battery is used in extremely high temperatures, a safety device will automatically prevent operation. To prolong Battery life: • While not in use, remove Battery from the Camcorder and AC Adaptor, and store in a cool, dark, dry place. • Keep Battery terminals clean. AC Adaptor DC Power Cable POWER Lamp DC OUT Connector DC IN Connector 1 Connect AC Adaptor DC OUT to Camcorder DC IN with supplied DC Power Cable. 2 Plug in AC Adaptor. POWER Lamp lights. Note: • While the DC Power Cable (supplied) is connected to the AC Adaptor, the Battery cannot be charged. • When not in use, unplug AC Adaptor from AC outlet. (Adaptor uses 1.2 W of electricity while plugged in.) CAUTION: This unit will operate on 110/120/220/240 V AC 50/60 Hz. An AC plug adaptor may be required for voltages other than 120 V AC. Please contact either a local or foreign electrical parts distributor for assistance in selecting an alternate AC plug. We recommend using the accessory power plug adaptor (VJSS0070) in an area which has special AC outlets. Car Battery Cord (Optional) 1 Connect PV-C16 Car Battery Cord (optional) to Camcorder DC IN. 2 A Start engine first. B Plug Car Battery Cord into Cigarette lighter socket. DC IN Connector Car Battery Cord (optional) Cigarette Lighter Socket (12 V) Cigarette Lighter Plug • If Car Battery cord fuse needs replacing, use exact current rating (in amps). Note: • This cord only works in vehicles equipped with DC 12 V (negative ground) battery. Check with your car/truck dealer. Use only specified car battery cord. • To avoid blowing the car battery cord fuse, do step 2 in the proper order. • Running vehicles must be well ventilated. • When not in use, disconnect cigarette lighter plug. • For personal safety the driver of the vehicle should not attempt to operate the camcorder while driving. 10 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]