Panasonic PV-L452 Vhs-c - Page 40

Digital Wipe Mode, Color Digital Filter, Digital Zoom, Digital

Page 40 highlights

Digital Still Camera Digital Wipe Mode Insert a captured still image into the current recording, or vice versa, in one of three wipe effects. 3 2 Before you begin... • Connect Camcorder to power source. • Insert the Memory Card (page 34). • Set POWER to CAMERA. 1 Repeat steps 1-3 on page 39 to set Picture in Picture Wipe title. 2 Press MODE repeatedly for Wipe effect 1, 2, or 3 (See left). • WIPE 1 will flash for a while to store the image for the wipe. 3 Press START: once © inserts captured image. twice © inserts current recording picture. • You can freeze the wipe in progress by pressing START. Press START again to resume wipe. Note: • If Memory Card is not inserted, "NO CARD" appears on-screen. Set Power to OFF, then insert the Memory Card. • Pictures captured with other brand products cannot be used with this Camcorder. • If "INCOMPATIBLE IMAGE" appears onscreen, the size of the captured image cannot be played back on this Camcorder. • If "CARD ERROR" appears on-screen, see page 56. • If Digital Wipe mode is selected, the following functions are not available: MotionSensor, Auto Fade, Digital Fade, Color Digital Filter, Digital Zoom, Digital E.I.S., Still/Strobe/Wide. 40 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

40
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Digital Still Camera
Insert a captured still image into the
current recording, or vice versa, in one of
three wipe effects.
1
Repeat steps 1-3 on page 39 to set
Picture in Picture Wipe title.
2
Press
MODE repeatedly
for Wipe
effect 1, 2, or 3 (See left).
• WIPE 1 will flash for a while to store
the image for the wipe.
3
Press
START:
once
inserts captured image.
twice
inserts current recording
picture.
You can freeze the wipe in progress
by pressing
START. Press
START
again to resume wipe.
Digital Wipe Mode
Note:
• If Memory Card is not inserted, “NO
CARD” appears on-screen. Set Power to
OFF, then insert the Memory Card.
• Pictures captured with other brand
products cannot be used with this
Camcorder.
• If “INCOMPATIBLE IMAGE” appears on-
screen, the size of the captured image
cannot be played back on this Camcorder.
• If “CARD ERROR” appears on-screen, see
page 56.
• If Digital Wipe mode is selected, the
following functions are not available:
MotionSensor, Auto Fade, Digital Fade,
Color Digital Filter, Digital Zoom, Digital
E.I.S., Still/Strobe/Wide.
Before you begin...
• Connect Camcorder to power source.
• Insert the Memory Card (page 34).
• Set POWER to CAMERA.
3
2