Panasonic PV-L452 Vhs-c - Page 34
Digital Still Camera - memory card
UPC - 037988976874
View all Panasonic PV-L452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Digital Still Camera Memory Card* Insertion/ Removal Before you begin... • Connect Camcorder to power source. *Memory Card: MultiMediaCard or SD Memory Card. • Set POWER to OFF. Captured images will be stored on the Memory Card. Be sure to insert the Memory Card before using the Built-in Digital Still Camera. Listed below are the Memory Cards which can be used with this Camcorder. Memory Card Capacity Memory Card (LSFT0262) (supplied) 8 MB MultiMediaCard (SanDisk brand) 8 MB, 16 MB SD Memory Card (optional) (See page 51.) 16 MB, 32 MB, 64 MB SD Memory Card write protection switch A write protection switch is located on the SD Memory Card. Sliding the switch to the "LOCK" position prevents writing on or formatting the card. LOCK Write protection switch 1 1 Slide TAPE EJECT to open door. 2 Fully insert the Memory Card, with the sloped corner down, into the Card Slot in the direction of the arrow. (See diagram.) 3 Push in on the inserted Card to eject. PUSH TO EJECT Note: • If Memory Card is not inserted, "NO CARD" appears on-screen. • Do not insert card in wrong direction. (This would become the basis for trouble.) 2 CARD SLOT • If "CARD ERROR" appears on-screen, see page 56. I Concerning the Memory Card • Except for some special features, this card is compatible with other Panasonic brand products, like Digital Camera (DMC-LC5, DMC-F7). • Panasonic only guarantees compatibility with Panasonic brand cards and those bearing the SanDisk logo. • This Camcorder can capture a maximum of 697 still images because of camera memory capacity. In order to capture 697 images, a larger Memory Card (optional) with approx. 62 MB of memory is needed for FINE mode and approx. 21 MB is needed for Normal mode. Cautions for the Memory Card : • While Memory Card data is being read, do not remove it, turn off the power, or subject unit to vibrations and shocks. • Do not leave the Memory Card in a place with high temperature, exposed to direct sunlight, or where electromagnetic waves and static electricity can be generated. • Electromagnetic waves, static electricity, malfunction of the Camcorder or of the Memory Card itself could erase the data recorded on it. To prevent the loss of picture data, we recommend that you make a backup copy on the computer. • Do not bend or drop the Memory Card as this could damage it or the captured contents. • Do not touch the connector on the rear edge of the Memory Card with your fingers, and take care that no dirt, dust or water enters it. • Do not affix other labels to the Memory Card face or back as Card insertion/removal may become impossible. 34 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]