Panasonic SC-HTB770S SC-HTB770S Owner's Manual (English) - Page 13
Connect the speaker cables., Drive a screw into the wall.
View all Panasonic SC-HTB770S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connect the speaker cables. 45 Push White Green Red 1 Insert the wire fully. r: White s: Blue line ≥ Insert the wire fully, taking care not to insert beyond the wire insulation. 2 Press into the groove. A Right speaker connector B Center speaker connector C Left speaker connector § If you have difficulty inserting the cable, try straightening the speaker cable and then bending the cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above). Drive a screw into the wall. ≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker. ≥ Keep the screws out of reach of children to prevent swallowing. A At least 30 mm (1 3/16q) B ‰4.0 mm (5/32q) C ‰7.0 mm to ‰9.4 mm (9/32q to 3/8q) D Wall or pillar E 5.5 mm to 6.5 mm (7/32q to 1/4q) Front view (semi-transparent image) F 238 mm (9 3/8q) G 745 mm (29 11/32q) J Wall mounting hole H 248 mm (9 3/4q) I 20 mm (25/32q) Getting started 13 RQT9778