Panasonic SC-HTB770S SC-HTB770S Owner's Manual (English) - Page 24

On a table

Page 24 highlights

Additional speaker fall prevention measures To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter "cord"). ≥ Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support is recommended (> 13, 17). Improper attachment may result in damage to the wall and speakers, and personal injury. ≥ Use a cord that is capable of supporting over 10 kg (22.05 lbs) (with a diameter of about 1.5 mm (1/16q)). ≥ The speaker fall prevention measure is to minimize the possibility of damage and harm, but it does not completely guarantee this effect. ≥ Keep the screws out of reach of children to prevent swallowing. ≥ Make sure that the slack of the cord is minimal. ≥ Depending on the placement of the speakers, the screwing position of the screw eye may differ. When attaching the speakers horizontally Wall mounting      On a table   A Cord§ B Screw eye C Wall § If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm (13/32q) apart from the tip, at an angle of 45o (as illustrated above). 24 RQT9778

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

24
RQT9778
To prevent the speakers from falling, it is recommended, as an additional
protection measure, to attach the speakers to the wall or table with a fall
prevention cord (hereafter “cord”).
±
Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support is recommended (
>
13, 17). Improper attachment may result in damage to
the wall and speakers, and personal injury.
Use a cord that is capable of supporting over 10 k
g
(22.05 lbs) (with a diameter of about 1.5 mm (
1
/
16
q
)).
The speaker fall prevention measure is to minimize the possibility of damage and harm, but it does not completely guarantee
this effect.
Keep the screws out of reach of children to prevent swallowing.
Make sure that the slack of the cord is minimal.
Depending on the placement of the speakers, the screwing position of the screw eye may differ.
Additional speaker fall prevention measures
When attaching the speakers horizontally
A
Cord
§
B
Screw eye
C
Wall
§
If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 10 mm (
13
/
32
q
) apart from the tip, at an angle of 45
o
(as
illustrated above).
Wall mounting
On a table