Panasonic SCHT822V SAHT822V User Guide - Page 53

Picture incorrect Picture distorted. ≥Ensure that the unit is connected directly to the television, and is not connected through an 14 A/V selector or other equipment. The television may display ≥The unit and television are using different video systems. Use a multi-system or NTSC television. - incorrectly or colors appear faded. ≥The system used on the disc doesn't match your television. PAL discs cannot be played. - This unit converts DVD-Audio recorded in PAL to NTSC for play, however, play may not function properly. The picture on the television ≥Mobile telephone chargers can cause some disturbance. - disappears or stripes appear on ≥If you are using a TV indoor antenna, change to an outdoor antenna. - the screen. ≥The television antenna wire is too close to the unit. Separate the antenna wire of the - television from the unit. Disc picture incorrect Picture size doesn't fit the screen. ≥Change "TV Aspect" in "Video" tab. 30 ≥Use the television to change the aspect. If your television does not have that function, 29 change "4:3 Aspect" in Display Menu. ≥Change the Zoom setting. 22 Menus not displayed correctly. ≥Restore the zoom ratio to a1.00. 22 ≥Set "Subtitle Position" in Display Menu to "0". 29 ≥Set "4:3 Aspect" in Display Menu to "Normal". 29 Auto zoom function does not work ≥Turn off TV's zoom function. - well. ≥Use the other preset aspect ratios or manual adjustment. 22 ≥Zoom function may not work well, especially in dark scenes and may not work depending - on the type of disc. VHS picture incorrect The picture is noisy or is in black ≥Adjust the tracking. 33 and white. ≥Make sure the television's input setting is correct. - Horizontal bars or lines run down ≥The video heads are dirty: clean them with a head-cleaning cassette. 54 the screen. ≥The video heads are worn: consult your dealer. - ≥The tape is old or damaged. - ≥You cannot correctly play tapes recorded with other systems (e.g., PAL). - Picture is distorted when stilled or ≥Some distortion is normal with tapes recorded using VP mode. - during slow-motion. The blue back appears during play. ≥You are playing a blank or poor quality part of the tape. - ≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue - back to appear. Consult your dealer. The picture jiggles. ≥Adjust the vertical hold. 33 Progressive video There is ghosting when progressive output is on. Pictures not in progressive output. Closed captions not displayed. ≥Change "Video Output Mode" in Picture Menu to "480I". This problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlace output. ≥If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will be interlace. ≥Press [SHIFT]i[PROGRESSIVE]. Or select "480P" in "Video Output Mode" in Picture Menu. ≥When progressive output is on, closed captions will not be displayed. 29 - 20, 29 - Sound incorrect Sound distorted. Effects do not work. Humming heard during play. There is noise when playing a video tape. ≥Noise may occur when playing WMA files. - ≥Some audio effects do not work or have less effect with some discs. - ≥Multi Re-master and Dolby Pro Logic II do not work if you have changed the play speed. - ≥When connected with headphones, only Sound Field Control is effective. - ≥An AC power supply cord or fluorescent light is near the subwoofer. Keep other appliances - and cords away from the subwoofer. ≥Adjust the tracking. 33 ≥The tape is old or damaged. - Listening to the radio Noise is heard. ≥Adjust the position of the FM or AM antenna. - "ST" flickers or doesn't light. ≥Use an outdoor antenna. 45 Sound is distorted. A beat sound is heard. ≥Turn the television off or separate it from the unit. - A low hum is heard during AM broadcasts. ≥Separate the antenna from other cables. - Recording " " flashes when I try to start ≥If the erasure prevention tab has been removed, cover the hole with adhesive tape. 5 recording. Cannot record. Timer recording doesn't record a ≥Check the clock and calendar. - program correctly. ≥Set the channel and start and end times correctly. - ≥Be sure to press [F] after programming to put the unit in timer recording standby. 36 ≥Program times may be overlapped. - Cannot record from other ≥Press [W CH] or [X CH] to select "AU". 35 equipment. ≥Check the connections to the other equipment. 35 Black bands appear in the recording. ≥Move the other equipment away from the television as it may be picking up interference. - The copy of a videotape or DVD is ≥This unit complies with industry standards regarding the recording and duplication of copy- - very poor. protected material. This includes commercial videotapes and DVDs. Consequently, copying not only infringes copyright laws but also presents serious technical difficulties. Even in cases where a copy can be made, the quality will be very poor. RQT7708 53