Panasonic SVP20U SVP20U User Guide - Page 52
BEFORE REQUESTING SERVICE, If Two SD Mobile Printers are
View all Panasonic SVP20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Before Requesting Service If the trouble persists even when the action suggested below has been taken, press the Power Button to turn off the power and disconnect and re-connect the Power Cable. 1: The power cannot be switched on. 1: The power plug is not plugged in correctly. 2: The printer does not print. 2-1: The Ink Cassette is not oriented properly, or was not pushed all the way in. 2-2: There is slack in the Ink Film. Take up the slack in the Ink Film. 2-3: The internal temperature of the printer is too high. Wait for a while. 2-4: Condensation has formed. Wait for a while. 3: Printing is not of the expected quality. 3-1: The paper being used is not of the specified type. 3-2: The paper was not loaded correctly. 3-3: Thermal head is dirty. Clean it with the supplied Head Cleaner. 4: The printed pictures are distorted. 4-1: The printer is located near a television, video game, or other source of electromagnetic waves. Move the printer so that it is at least 1 m away from the television, video game, etc. 4-2: The printer is located near a stereo speaker, large motor, or other source of a strong magnetic field. Move the printer away from the device generating the magnetic field. 5: Paper jams occur frequently. 5: The paper is creased or curled. 6: Battery runs down quickly. 6-1: Are you using the Battery in an extremely cold place? In cold places, the operating time of the Battery becomes shorter. 6-2: Has the Battery worn out? If the operating time is still too short even after the Battery is fully charged, the Battery has worn out. 7: The [CARD ACCESS] sign remains displayed for a long time. 7: High resolution images take a long time to read. The following are approximate reading times per resolution. 640t480 (VGA) :About 4 seconds 1280t960 (1.3 million pixels) : About 12 seconds 1600t1200 (2 million pixels) : About 20 seconds 2240t1680 (4 million pixels) : About 40 seconds 8: Printing starts but printer stops operating midway. 8: When the ambient temperature or the temperature within SD Mobile Printer is low, the printer feeds the paper but stops operating to warm itself for a while. Wait for one or two minutes until the temperature rises. 9: If Two SD Mobile Printers are connected to the PC, printing does not occur. 9: Two or more SD Mobile Printers connected to one PC do not operate normally. Do not connect two or more SD Mobile Printers. 10: The Power Lamp starts flashing while the printer is printing. 10: The flashing Power Lamp indicates that the number of printable copies is reduced. (A few more copies can be printed.) When the Power Lamp flashes more frequently, printing will stop. (If a sheet of paper is being printed, printing will stop after printing has been completed.) 52