Panasonic SVP20U SVP20U User Guide - Page 8
POWER SUPPLY, DC IN 4.9V] socket on the SD Mobile
View all Panasonic SVP20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
DC IN 4.9V 1 Power Supply ª Using an AC Adaptor 1 Connect the DC Input Lead to the [DC IN 4.9V] socket on the SD Mobile Printer. 2 Connect the AC main Lead to the AC Adaptor and the AC Outlet. ≥Hold down the Power Button [ ] for about 2 seconds, and the printer is on. The SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND 2 SHALL BE EASILY ACCESSIBLE. 1 DC IN 4.9V 2 1 ª Using the Battery 1 Attach the Battery 1 to the Battery Holder on the SD Mobile Printer 1 and slide it forward until it locks with a click. 2 2 Connect the AC mains Lead to the AC Adaptor and to an AC Outlet. (Refer to the description above.) ≥The [ON] Lamp flashes. 3 Leave them as above until the Power Lamp [ON] goes off. ≥When recharging is completed, the [ON] Lamp goes off. ≥Remove the AC Adaptor to use the Battery. 8