Panasonic SXKN7000 SXKN7000 User Guide - Page 143
SD-Audio Play
View all Panasonic SXKN7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
SD card Part VII SD card SD-Audio Play Play back audio data on the SD card saved by a PC, etc. 1. Insert the SD card with the stored data to be played into the SD slot. (See page 138.) 4. Press the buttons next to the SD slot to play back the data. • Close the lid securely after inserting the card. 2. Press the SD button to turn it on. SD LOAD 3. On the SD MENU display, select SD-AUDIO PLAY. • The display looks similar to the following. • Using the PLAY MODE button, you can select the type of playback. NORMAL: For playing back the songs in sequential order. ALL REPEAT: For playing back all the songs repetitively. 1 SONG REPEAT: For playing back a song repetitively. • You can select PLAY LIST using the PLAYLIST SELECT button as necessary. • If you press the SD-SOUND PLAY button, the display changes to the PLAYBACK display for SMF data stored on the card. Volume Stop Playback/ Pause Skip to the next, Fast forward (hold the button) Skip to the previous, Rewind (hold the button) • Adjust the volume for playback using the SD VOLUME ∧ and ∨ buttons. The volume setting will be kept for about one week after the power is turned off. • You can also use the buttons below the display to adjust these settings. • Press the PLAY button immediately after inserting the SD card to enter the playback mode directly. • When the SD card contains both SD-AUDIO and SD-SOUND data, select the priority of them beforehand. (Refer to page 152.) • The playback operation is possible even when the control panel unit is closed. 143 QQTG0671