Panasonic TCL42U30 TCL32U3 User Guide - Page 12

First Time Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when "Auto power on" (p. 34) is set to "No". Turn the TV On with the POWER button (TV) (Remote) or or Configure your viewing mode Select your language Language / Idioma / Langue English Español Français select OK Select your viewing mode (Be sure to select "Home use") Set viewing mode Step 2 of 6 Home Use Store Demonstration select Select OK RETURN OK Please confirm your selection (Home Use) before pressing OK button. If you select "Store Demonstration" by mistake in , confirmation screen will be displayed. You are selecting the store demonstration mode. Yes No If you select "Yes", the picture mode will regularly reset to "Vivid" and a Picture Refresh message will be displayed on the screen. select OK Select "No" and return to previous screen . If you select "Yes", Screen enters the store demonstration mode. To display the "Set viewing mode" screen again as shown above and select "Home Use", do one of the following: • Press and hold down the side POWER button for at least five seconds. • Unplug power cord for 30 seconds and plug it again. Note If you use any other step other than then turn the TV off, or if you used the EXIT button to quit before completing the settings, the next time you turn the TV on, "First time setup" will not be automatically displayed. • The settings up to that point are saved. • You can start "First time setup" at any time. (p. 34) Language, ANT/Cable setup, Input labels, Clock can also be changed from the Settings Menu. (p. 34) 12