Panasonic TH42PWD6UX TH37PWD6UX User Guide - Page 34

SET UP for Input Signals SYNC Select SIGNAL from the "SET UP" menu during RGB input signal. Press to select each item. R Press to exit from adjust mode. SET UP 1/2 COMPONENT/RGB-IN SELECT RGB INPUT LABEL RGB1 SIGNAL SCREENSAVER POWER SAVE OFF STANDBY SAVE ON POWER MANAGEMENT OFF OSD LANGUAGE ENGLISH (US) Press (ACTION) button SIGNAL [ RGB ] SYNC H & V H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz Note: Sync cannot be adjusted while a DVI signal is being applied. Setting RGB sync signal Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal). SYNC H & V H & V: The H and V sync signals are input from the HD/VD connector. ON G: Uses a synchronized signal on the Video G signal, which is input SYNC ON G from the G connector. CS: Uses a synchronized signal of Composite Sync input. SYNC CS H-FREQ. (kHz)/V-FREQ. (Hz) Displays the H (Horizontal)/V (Vertical) frequencies. This display is valid only for RGB input and DVI input signal. Display range: Horizontal 15 - 110 kHz Vertical 48 - 120 Hz 34 H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz