Panasonic WJ-NV300 Operating Instructions

Panasonic WJ-NV300 Manual

Get Panasonic WJ-NV300 PDF manuals and user guides View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic WJ-NV300 manual content summary:

  • Panasonic WJ-NV300 | Operating Instructions - Page 1
    Instructions Network Disk Recorder Model No. WJ-NV300K WJ-NV300K/G ERROR OPERATE REC ALARM BUZZER STOP Network Disk Recorder WJ-NV300 (This illustration represents WJ-NV300K.) Before attempting to connect or operate this product, please read these instructions carefully and save this manual
  • Panasonic WJ-NV300 | Operating Instructions - Page 2
    relating to network [Network 52 Configure the basic network settings [Basic].......52 Procedure to register information for the "Viewnetcam.com" service 54 Configure the settings relating to the mail notification [e-Mail 55 Configure the Panasonic alarm protocol settings [Panasonic alarm protocol
  • Panasonic WJ-NV300 | Operating Instructions - Page 3
    on the media device 172 Play recorded images downloaded using a web browser 172 Install the viewer software 173 Uninstall the viewer software 173 How to use the viewer software 174 Setup 177 Basic operations 177 Configure the settings 177 Update the firmware 178 Notification by e-mail 179
  • Panasonic WJ-NV300 | Operating Instructions - Page 4
    on the PC, download the latest Adobe® Reader® from the Adobe web site and install it. Depending on descriptions, the model name of this recorder may be omitted as "NV300" in the manuals and on the setup. The screens used in these operating instructions show the case in which WJ-NV300K is used and
  • Panasonic WJ-NV300 | Operating Instructions - Page 5
    bit True color or better Network interface: 10BASE-T/100BASE-TX/1000BASE the operating instructions on the problems such as slow imaging or the browser becomes inoperable. • Microsoft® Windows® 7 Starter is not supported. Note: • Refer to "Notes about versions of Windows®/Internet Explorer®" (PDF
  • Panasonic WJ-NV300 | Operating Instructions - Page 6
    as SD card or SD memory card. Network cameras are described as cameras. Restrictions when when copying recorded images. When downloading recorded images Downloading of recorded images may of the camera shorter. Refer to the operating instructions of the camera for information about the refresh
  • Panasonic WJ-NV300 | Operating Instructions - Page 7
    setting sun- light) * Configure the settings of the camera supporting this function before attempting to use the face matching function. Motion Refer to the operating instructions of the camera for further information. Time display of recorded images When displaying recorded images, the displayed
  • Panasonic WJ-NV300 | Operating Instructions - Page 8
    operation It is possible to connect up to 32 cameras to the recorder and record images from them on the hard disk drives. The following recording operations are available. Schedule recording: Recording that is automatically performed at the designated time range on the desig- nated day(s) of
  • Panasonic WJ-NV300 | Operating Instructions - Page 9
    . It is also possible to perform operations and some settings of the recorder from the web browser. For the setup items that can be configured the provided mouse to the mouse connection port on the rear side of the recorder. →→ The mouse cursor will be displayed on the main monitor. Step 3 Click
  • Panasonic WJ-NV300 | Operating Instructions - Page 10
    About the operation of on-screen keyboard Use the on-screen keyboard to enter characters for the setting items. When clicking the [ ] icon beside the entry field, the on-screen keyboard will be displayed, and it will become possible to enter characters by clicking the character keys on the keyboard.
  • Panasonic WJ-NV300 | Operating Instructions - Page 11
    to operate the recorder will be performed, but other settings will remain default. On the [ to configure the minimum settings required to operate the recorder, such as date & time and camera registration. [Exit] button Applies the settings to the recorder and closes the setup menu to return to
  • Panasonic WJ-NV300 | Operating Instructions - Page 12
    recorder • Camera registration • Order change of the registered camera numbers • Recording frame rate and image quality * Other settings will remain default time zone. GMT-12:00 - GMT+13:00 Default: GMT-5:00 (WJ-NV300K) GMT (WJ-NV300K/G) Marking the checkbox for [Activate the Daylight saving time
  • Panasonic WJ-NV300 | Operating Instructions - Page 13
    registered in the default settings. To For the video encoder (WJ-GXE500), only the Panasonic network cameras are used, the model numbers will be displayed. [Results] New: Displayed when the camera is newly connected to the recorder . Refer to the operating instructions of the camera for further
  • Panasonic WJ-NV300 | Operating Instructions - Page 14
    camera and retry the camera registration by referring to the operating instruction of the camera. • If the registered camera is not recording frame rate. 1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 30 ips Default: 10 ips Note: • To apply 60 ips, configure on "Advanced record- ing setup" on the "Recording
  • Panasonic WJ-NV300 | Operating Instructions - Page 15
    for which recording on the hard disk drives is available. Note: • The referenced recording days will be calculated based on the assumption that recording is started on Monday. • The HDD consumption for the event recording will be excluded. • If a camera manufactured by other than Panasonic is used
  • Panasonic WJ-NV300 | Operating Instructions - Page 16
    daylight saving time. [Camera] button: Displays the "Camera" page. Perform registration and setup of network cameras. [REC & event] button: Displays the "REC & event" page. Set up the recording schedules, cameras and the face matching function. Set up date & time and language [Date/Language
  • Panasonic WJ-NV300 | Operating Instructions - Page 17
    zone. GMT-12:00 - GMT+13:00 Default: GMT-5:00 (WJ-NV300K) GMT (WJ-NV300K/G) Enter the start (In) and end (Out ) date & time for daylight saving time. The calendar will be displayed by clicking the [ ] icon. Refer to the instructions
  • Panasonic WJ-NV300 | Operating Instructions - Page 18
    signal from the ALARM/CON- TROL connector on the rear panel of the recorder and adjusts the clock. When the signal is received and if the clock ± the hour, the time will be adjusted to 00 minutes 00 seconds. Default: Off [Language] tab Select the display language for the main monitor and for
  • Panasonic WJ-NV300 | Operating Instructions - Page 19
    as the network settings of the communication trouble with user authentication of the camera failed. Camera error: The response from the camera is incorrect. Note: • When an error message is displayed, check the camera connections and settings (☞ operating instructions of the camera). If the problem
  • Panasonic WJ-NV300 | Operating Instructions - Page 20
    into the network. Even Panasonic cameras are used, the model numbers will be displayed. [Results] New: Displayed when the camera is newly connected to the recorder instructions of the camera for further information. • When "On" is selected for the "DHCP" setting of the detected cameras, the recorder
  • Panasonic WJ-NV300 | Operating Instructions - Page 21
    can be increased up to 16, 24, or 32. (Default: 16 for WJ-NV300K, 9 for WJ-NV300/G.) [Model] The model of a registered camera will be Register the user name whose access level is "Administrator". [Password] Enter the password to be used for the user whose name has been registered as "User name"
  • Panasonic WJ-NV300 | Operating Instructions - Page 22
    Interchange camera numbers [Change the display position of camera] Click the [Setup >] button for "Change the display position of camera" on the [Camera registration] tab to display the following items. Images from the cameras will be displayed on the monitor from the upper left corner to the right
  • Panasonic WJ-NV300 | Operating Instructions - Page 23
    of Panasonic cameras only can be configured. Refer to the "readme.txt" on the provided CD-ROM about the supported cameras. Some functions are not supported depending on the models of the connected cameras. For further information about detailed specifications, refer to the operating instructions of
  • Panasonic WJ-NV300 | Operating Instructions - Page 24
    or not to display the date & time. If date & time display is activated, date & time will be displayed on camera images and will also be recorded with the recorded images. To transmit the settings to the camera, mark this item, and select either of the following. On: Date & time displayed Off: Date
  • Panasonic WJ-NV300 | Operating Instructions - Page 25
    not to display the title on camera images. If title display is activated, the title will be displayed on camera images and will also be recorded with the recorded images. To transmit the settings to the camera, mark this item, and select either of the following. On: Title displayed Off: Title not
  • Panasonic WJ-NV300 | Operating Instructions - Page 26
    Set up how to turn on or off the indicators [Indicator] Select how to turn on or off the link indicator, access indicator or status indicators for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for "Indicator" on the [Camera setup
  • Panasonic WJ-NV300 | Operating Instructions - Page 27
    client)" for the H.264 bit rate from the following. High, Middle, Low [Control time period] Select the period of controlling H.264 bit rate to be recorded from the following. 1 h, 6 h, 24 h, 1 week 27
  • Panasonic WJ-NV300 | Operating Instructions - Page 28
    . The screen returns to the [Camera setup] tab. Important: • When the bit rate is changed, the camera image transmission will temporarily pause. During the pause, recording will not be performed. 28
  • Panasonic WJ-NV300 | Operating Instructions - Page 29
    interval] Select an interval to update the image display. If used in a network environment where frequent errors occur, shorten the refresh interval to reduce image distortions. rarily be canceled and no image will be recorded during this period if the setting to change the refresh interval is transmitted
  • Panasonic WJ-NV300 | Operating Instructions - Page 30
    Set up the method of camera installation [Upside-down] Select the method of installation for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for " Upside-down " on the [Camera setup] tab will display the setup window. [Upside-down]
  • Panasonic WJ-NV300 | Operating Instructions - Page 31
    Set up pan/tilt-flip [Pan/tilt-flip] Select the pan/tilt-flip function for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for "Pan/tilt-flip" on the [Camera setup] tab will display the setup page. [Pan/tilt-flip] Select whether or
  • Panasonic WJ-NV300 | Operating Instructions - Page 32
    Set up Super Dynamic [Super Dynamic (Wide dynamic range)] Select the Super Dynamic function for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for "Super Dynamic (Wide dynamic range)" on the [Camera setup] tab will display the
  • Panasonic WJ-NV300 | Operating Instructions - Page 33
    Set the adaptive black stretch function of the camera [Adaptive black stretch] Determine whether to enable the adaptive black stretch function for each camera. The settings will be changed after the settings have been transmitted to the camera. Clicking the [Setup >] button for "Adaptive black
  • Panasonic WJ-NV300 | Operating Instructions - Page 34
    by back light. On: Mask area will automatically be set. Off: Mask area will not be set automatically. It is necessary to set mask areas manually. ■ Camera Selection Select the camera to which the setting of the "Back light compensation (BLC)" is to be sent. Mark the checkbox of the camera
  • Panasonic WJ-NV300 | Operating Instructions - Page 35
    Set up Light control mode [Light control mode] Select how to control the amount of light for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for "Light control mode" on the [Camera setup] tab will display the setup page. [Light
  • Panasonic WJ-NV300 | Operating Instructions - Page 36
    Set the automatic slow shutter of the camera [Auto slow shutter (Maximum shutter)] Select the auto slow shutter setting for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for "Auto slow shutter (Maximum shutter)" on the [Camera
  • Panasonic WJ-NV300 | Operating Instructions - Page 37
    Set the black and white switchover of the camera [Day & Night (electrical)] Select the day and night setting for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for "Day & Night(electrical)" on the [Camera setup] tab will display
  • Panasonic WJ-NV300 | Operating Instructions - Page 38
    or not to use the VMD (VMD: Video Motion Detection) alarm function when a change (movement) is detected in the image. Refer to the operating instructions of the camera in use for how to configure the VMD alarm. On: Detects alarms. Off: Does not detect alarms. [Detection sensitivity] 1 (low) - 15
  • Panasonic WJ-NV300 | Operating Instructions - Page 39
    position on the time bar to designate the start and end time. When the time is designated, the time bar turns red. Note: • At the default, schedule recording has been set for 24 hours on Time table 1. To delete the designated start and end time, right-click the timetable. • The
  • Panasonic WJ-NV300 | Operating Instructions - Page 40
    min/ 2 min/ 3 min/ 5 min/ 10 min/ 15 min Manual: Recording will continue while receiving an alarm input signal. Recording will be performed for at least 8 seconds. Ext.: Alarm output will continue until the alarm action is reset. Default: 30 s ■ Days to record Select the actions to be taken on each
  • Panasonic WJ-NV300 | Operating Instructions - Page 41
    falls into a time table that has not been set up will not trigger recording. Refer to page 39 for how to configure the time bar. [e-Mail] To send an alarm e-mail when an event occurs, mark this item. [Panasonic alarm protocol] Mark the checkbox of this item to automatically transmit information on
  • Panasonic WJ-NV300 | Operating Instructions - Page 42
    39) [Audio] Select whether or not to record audio together with images. On: Audio will be recorded. Off: Audio will not be recorded. Default: Off [Schedule] Select a schedule in which the desired recording to be performed is included. Schedule 1: Recording will be performed according to the settings
  • Panasonic WJ-NV300 | Operating Instructions - Page 43
    to cancel the alarm action. Rec.: The buzzer will keep on sounding during event recording. Default: 2 s Note: • If the time set for "Output duration" or " on a PC connected to a network when an alarm occurs. On: Display a message. Off: Does not display a message. Default: On [Main monitor action]
  • Panasonic WJ-NV300 | Operating Instructions - Page 44
    matching alarm). Clicking the [Advanced >] button for each item will open the respective "Advanced setup". * Only when the license of the additional business intelligence kit (WJ-NVF30, WJ-NVF30W) is registered 44
  • Panasonic WJ-NV300 | Operating Instructions - Page 45
    . Save: Logs will be saved. Not save: Logs will not be saved. Default: Save [Setup by terminal] Set up individual terminals numbered from 1 to 9. [Recording camera] Select the camera for recording. When "Off" is selected, recording will not be performed. All: Applies all the registered cameras for
  • Panasonic WJ-NV300 | Operating Instructions - Page 46
    up the action to be taken when a Panasonic alarm protocol received from a camera triggers camera "; "Mode" and "Alarm logs", and also "Recording camera", "Preset" and "Terminal output" under "Setup received from a PC that is connected via a network protocol triggers command alarm. Refer to the "Set
  • Panasonic WJ-NV300 | Operating Instructions - Page 47
    registering the license of the additional business intelligent kit (WJ-NVF30, WJ-NVF30W: optional). Configure the settings relating to the use regarding the face matching function. Refer to the operating instructions (PDF) of the Additional Business Intelligence Kit for further information about
  • Panasonic WJ-NV300 | Operating Instructions - Page 48
    and Panasonic alarm port number (the port number for incoming site alarm). [Recording mode] Determine whether or not to stop all recording actions. Set to "Off", primarily to stop access to the HDD before turning off the power. On: Performs recording. Off: Stops all recording actions. Default: On
  • Panasonic WJ-NV300 | Operating Instructions - Page 49
    main monitor or sub monitor connected to the recorder and the monitor of the PC connected via a network are configured on the setup menu - the camera title. Default: On [Position] Select the position to display the camera title on images. L-Upper/ L-Lower/ R-Upper/ R-Lower Default: R-Upper [Camera
  • Panasonic WJ-NV300 | Operating Instructions - Page 50
    on the sub monitor. Determine whether or not to use secret view. On: Enables the secret view function. Off: Disables the secret view function. Default: Off Note: • While "1-screen live sequence" is being per- formed, the secret view images will be skipped (not displayed). • The image on the sub
  • Panasonic WJ-NV300 | Operating Instructions - Page 51
    32: Fixes the camera channel (The recorder will always output the audio of the selected camera.) Default: Selected camera ■ Select multiscreen buttons from the camera will automatically be stopped and reduce the load of the network camera if both the main monitor and the sub monitor (HDMI) are
  • Panasonic WJ-NV300 | Operating Instructions - Page 52
    mask] Select the subnet mask in accordance with the recorder's network environment. Enter in the same way as the IP address. Default: 255.255.255.0 [Default gateway] Select the address for the default gateway in accordance with the recorder's network environment. Enter in the same way as the IP
  • Panasonic WJ-NV300 | Operating Instructions - Page 53
    the IP address. Default: 0.0.0.0 When using the "Viewnetcam.com" service [Domain name] Enter the domain name of the recorder. The first min/ 50 min/ 1 h Default: 1 h Note: • "Viewnetcam.com" is a Dynamic DNS service designed for use with Panasonic Network Cameras. Refer to the "Viewnetcam.
  • Panasonic WJ-NV300 | Operating Instructions - Page 54
    until the URL of the registered recorder is validated. • To cancel the enrollment in the "Viewnetcam. com" service, access the "Viewnetcam.com" website service. Available number of characters: 250 characters Enter in the form of "(host name). (domain name)". Default: NWDR Note: • Refer to the network
  • Panasonic WJ-NV300 | Operating Instructions - Page 55
    to attach the alteration detection code to the recorded images to be downloaded from an FTP server. Off: Does not attach the alteration detection code. On: Attaches the alteration detection code. Default: Off ■ Network Setup [PC port] Configure the network settings for the PC port of this product
  • Panasonic WJ-NV300 | Operating Instructions - Page 56
    transmitted. When "On" is selected, "SMTP" will be set for the authentication method. Set the user name and password for the authentication. On: Uses the SSL. Off: Does not use the SSL. Default: Off [Destination address - Address1 - Address4] Enter the mail addresses of the recipients of the alarm
  • Panasonic WJ-NV300 | Operating Instructions - Page 57
    details on the software. [Port number(to PC)] Enter the port number of the recipient PCs. It is usually not necessary change the default. Default: 1818 [ is available only when "Manual" is selected for "DNS" on the [Basic] tab accessed from the "Advanced setup" menu - the "Network" page of the setup
  • Panasonic WJ-NV300 | Operating Instructions - Page 58
    Default: Off Important: • Inaccuracy of time stamp on recorded images due to inaccurate clock adjustment of this product may cause operational problems is available only when "Manual" is selected for "DNS" on the [Basic] tab accessed from the "Advanced setup" menu - the "Network" page of the setup
  • Panasonic WJ-NV300 | Operating Instructions - Page 59
    ■ Network Determine whether or not to require user authentication for operating the recorder from a PC. [User authentication] Select "On" or "Off" to determine whether or not to authenticate the user. On: Login followed by user authentication Off: Login without user authentication Default: On ■ User
  • Panasonic WJ-NV300 | Operating Instructions - Page 60
    level settings. At the default, operations allowed at the user level are as follows: Administrator/Manager: Possible to perform all the operations (Administrators) Operator: Possible to perform a part of the set- tings of the recorder and alarm reset (Head of operators) Viewer: Possible to monitor
  • Panasonic WJ-NV300 | Operating Instructions - Page 61
    Select the cameras allowed for operation by each user level (operator/viewer/logged out) by marking the respective checkboxes. edit or delete the user information [User registration] Use this tab to register, edit or delete user names and passwords. [User name] Enter the user name using the on-
  • Panasonic WJ-NV300 | Operating Instructions - Page 62
    set on the [Basic] tab (☞ page 59). Manager/ Operator/ Viewer * Administrator and manager both have the same level, but the administrator has the higher priority. Default: Operator [Delete] button Deletes the selected user. [Default screen] Select a startup screen to be displayed after login. Cam
  • Panasonic WJ-NV300 | Operating Instructions - Page 63
    : • For enhanced security, make sure to change the administrator name and password from the default. Change the password periodically. [Password (Retype)] Enter the password that has been set for "Password" again for confirmation. [Administrator name] Enter the administrator name using the
  • Panasonic WJ-NV300 | Operating Instructions - Page 64
    The version of the recorder and disk information is displayed, and the settings relating to hard disk drives can be configured software and hardware), serial number, network information (MAC address, IP address, line speed), temperature inside the recorder and highest temperature inside the recorder
  • Panasonic WJ-NV300 | Operating Instructions - Page 65
    HDD that is not available with the currently used HDD operation mode. [Recorded time range] Displays the time range of the images recorded on the hard disk drives. Note: • When using in RAID5/RAID6 mode, "Capacity", "Status" and "Recorded time range" will be displayed in the "HDD1" section of each
  • Panasonic WJ-NV300 | Operating Instructions - Page 66
    disk firmware upgrade, can be performed on this tab. [Network link down detection] Select "On" or "Off" to determine whether or not to detect the network disconnection on the network port of the recorder. On: Detects the network disconnection. Off: Does not detect the network disconnection. Default
  • Panasonic WJ-NV300 | Operating Instructions - Page 67
    recorder has been turned on. POWER ON(UPDATE): The recorder is rebooted after the software is updated. POWER ON(RESTART SWITCH): The recorder is rebooted by pushing the Restart button. BEFORE TIME CHANGE MANUALLY to the default or loaded. • HTTP port number • FTP port number • Network port • DNS
  • Panasonic WJ-NV300 | Operating Instructions - Page 68
    is registered) [Firmware update] Updates the software saved on an SD memory card to the recorder to upgrade the firmware. Click the [Execute kit (WJ-NVE30, WJ-NVE30W) for how to obtain the "Registration Key" to add cameras. Important: • After registering the "Registration Key" for the recorder or
  • Panasonic WJ-NV300 | Operating Instructions - Page 69
    window to register the license. When using the recorder for the first time, be sure to Key1-2] (WJ-NV300K) [Additional camera - Registration Key1-3] (WJ-NV300K/G) To instructions (PDF) of the Additional Business Intelligence Kit for further information. [Optional extension for Fisheye network
  • Panasonic WJ-NV300 | Operating Instructions - Page 70
    unformatted SDHC/SD memory card or an SDHC/SD memory card formatted with a PC or another device, it is necessary to format it with this recorder. Refer to page 138 for how to format. • If operations are performed soon after an SD memory card is inserted, it may take time to
  • Panasonic WJ-NV300 | Operating Instructions - Page 71
    in to the recorder. How to display the "HDD management" page Step 1 Click the [HDD management] button of the setup menu - the "Advanced setup" menu. →→ The window with the administrator name and password entry fields will be displayed. The window is also displayed when a user has already logged
  • Panasonic WJ-NV300 | Operating Instructions - Page 72
    drives are formatted. It is necessary to initialize the HDD after replacing the HDD. Important: • When a hard disk drive is formatted, all the recorded images will be erased. Step 1 Click the [Execute >] button for "Format HDD" on the [General] tab - [HDD management] page. →→ The window to format
  • Panasonic WJ-NV300 | Operating Instructions - Page 73
    the dealer for the removal, installation, and the related process of hard disk drives. Important: • When the link process is performed, the data required in the extension unit. Even if 2 of the HDDs become faulty, recorded images can be recovered using the other remaining HDDs in this mode. The HDDs
  • Panasonic WJ-NV300 | Operating Instructions - Page 74
    Note: • When one of the HDDs is replaced in the mirroring mode, "Add" will be displayed in the status information section of "HDD information". The newly replaced HDD will start working in the mirroring mode when "Add HDD" is executed. In this case, all data on the replaced HDD will be erased. • It
  • Panasonic WJ-NV300 | Operating Instructions - Page 75
    the "Extra function" page of the setup menu the "Advanced setup" menu. The "Extra function" page has the [Business intelligence] tab. Refer to the operating instructions (PDF) of the Additional Business Intelligence Kit for further information about how to configure the settings. 75
  • Panasonic WJ-NV300 | Operating Instructions - Page 76
    ips, 15 ips, 30 ips XF, SF, FQ, NQ Referenced recording (Calculated result will be days displayed.) Default 20nn/mm/1 0:00 ("nn" and "mm" are calculated base on the serial number of the recorder.) GMT-5:00 (NV300K), GMT (NV300K/G) Checked 10 ips FQ (Calculated result will be displayed.) Basic
  • Panasonic WJ-NV300 | Operating Instructions - Page 77
    Default 2013/1/1 0:00 - 2037/12/31 23:59 2013/1/1 0:00 - 2037/12/31 23:59 Off, On 2014/3/9 2:00 AM (NV300K)*2 2014/3/30 1:00 (NV300K/G)*3 2014/11/2 2:00 AM (NV300K)*4 2014/10/26 1:00 (NV300K User (Blank) d (Text will be entered.) (Blank) d Password (Text will be entered.) (Blank) d Port No.
  • Panasonic WJ-NV300 | Operating Instructions - Page 78
    1(Low), 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15(High) Default Remarks Schedule1 Mon, Tue, ..., Sun Days to record Checked/Not checked Checked Schedule1 Schedule to record Time table1-Schedule --:--, 00:00 - 24:00 recording (Schedule bar) Schedule bar 1: 00:00 - 24:00 Schedule bar
  • Panasonic WJ-NV300 | Operating Instructions - Page 79
    recording) Schedule to record (Time table2-Event recording-e-Mail) Schedule to record (Time table2-Event recording-Panasonic alarm protocol) Available range Default Time table1, Time table2, Off Time table1 2 s, 5 s, 10 s, 20 s, 30 s, 1 30 s min, 2 min, 3 min, 5 min, 10 min, 15 min, Manual
  • Panasonic WJ-NV300 | Operating Instructions - Page 80
    recording) Schedule to record (Time table2-Event recording-e-Mail) Schedule to record (Time table2-Event recording-Panasonic alarm protocol) Available range Default Time table1, Time table2, Off Time table1 2 s, 5 s, 10 s, 20 s, 30 s, 1 30 s min, 2 min, 3 min, 5 min, 10 min, 15 min, Manual
  • Panasonic WJ-NV300 | Operating Instructions - Page 81
    (Terminal output) Setup by terminal (Terminal input) Mode Alarm log Setup by camera (Recording camera) Setup by camera (Preset) Setup by camera (Terminal output) Available range Default (Registered information will be displayed.) (Registered information will be displayed.) When the aspect ratio
  • Panasonic WJ-NV300 | Operating Instructions - Page 82
    range Off, Recording only, Recording & alarm action Save, Not save Default Recording & alarm action Save Setup by command number (Recording camera) Setup by 4: Undefined On Alarm disarm duration 2 s, 3 s, 5 s, 10 s 2 s Panasonic alarm port number (Port No.) 1818 Remarks d d d d d d d d d
  • Panasonic WJ-NV300 | Operating Instructions - Page 83
    are not connected Hide the camera title of the sub monitor Checked/Not checked Checked/Not checked Checked/Not checked Default Remarks Selected camera d Checked, Fixed d Checked d Not checked d Checked d Checked d Not checked d Not checked d Not checked d Not checked d Not
  • Panasonic WJ-NV300 | Operating Instructions - Page 84
    [Camera/PC port] DNS Setup DDNS Setup Advanced setup Network Setup [PC port] IP address (IP address) Subnet mask (IP address) Default gateway (IP address) Line speed DNS Auto, 100M-Full, 100M-Half, 10M-Full, 10M-Half Off, Manual Primary server address Secondary server address (IP address
  • Panasonic WJ-NV300 | Operating Instructions - Page 85
    Menu/Tab Network e-Mail Panasonic alarm protocol NTP/SNMP User management Basic Setting item (including those of Available range the "Advanced setup" menu) Default Remarks e-Mail setup SMTP server (Text will be entered.) (Blank) d address SMTP port number (Port No.) 25 d POP server
  • Panasonic WJ-NV300 | Operating Instructions - Page 86
    Setup Camera image display Register new user User name Password Level Default screen* Edit user information User name Password Level Available range Default Remarks Checked/Not checked Manager: d (Checked, Fixed) Operator: Not checked Viewer: Not checked Logged out: (Not checked
  • Panasonic WJ-NV300 | Operating Instructions - Page 87
    Edit user Default screen* information Administrator setup Administrator name Password Password (Retype) Level Default screen* Available range Default Software version1 Software version2 Hardware version Serial number Network port [Camera/PC port] MAC address IP address Line speed Network
  • Panasonic WJ-NV300 | Operating Instructions - Page 88
    Key 3 (WJ-NV300K/G) Additional business intelligence Registration Key Optional extension for Fisheye network camera Registration Download face data (None) (Only available for Web browser) Upload face data (Only available for Web browser) (None) Firmware update (None) Other (None) Default
  • Panasonic WJ-NV300 | Operating Instructions - Page 89
    "Advanced setup" menu) HDD information Capacity Operation Status Recorded time range Format HDD HDD information (Capacity) HDD information ) (Indication only) Single mode, Mirroring mode, RAID5 mode, RAID6 mode Default Remarks (Indication only) d (Indication only) d (Indication only) d
  • Panasonic WJ-NV300 | Operating Instructions - Page 90
    gender judgement Matching area Save Start statistics data (to SD card) End Download Start statistics data (Only End available for Web browser) x: 0 - 1280 /12/31 23:59 2013/1/1 0:00 - 2037/12/31 23:59 Default Remarks Off d Detection area1: All area Detection area2- 4: No setting
  • Panasonic WJ-NV300 | Operating Instructions - Page 91
    (hard disk drive) Network camera error recovery Network camera error detection (audio) Network camera error recovery (audio) Video loss (Notification of video input signal loss occurred on the encoder) Video loss recovery (Notification of video input signal loss recovered on the encoder) Recording
  • Panasonic WJ-NV300 | Operating Instructions - Page 92
    - - Network error - Skip time adjustment - Address error: PANASONIC ALARM No response: PANASONIC ALARM Other error: PANASONIC ALARM HDD logically that continues recording on another hard disk drive even if an error occurs, such as an HDD write error. *2 Refer to the operating instructions of the
  • Panasonic WJ-NV300 | Operating Instructions - Page 93
    failure Other errors for SNMP Password error for HTTP user name HTTP download failure HTTP request invalid Other errors for HTTP Failed to resolve the DDNS server address from DNS. No response from the DDNS server. Same host name has registered. Undefined error. Network log NETWORK LINK ERROR
  • Panasonic WJ-NV300 | Operating Instructions - Page 94
    port on the rear side of the recorder. When operating the recorder using a web browser, refer to "Network" (☞ page 52). Ctrl (control) screen display The control screen is the default screen at startup. The main operations of the recorder are performed from this screen. q e w r Ctrl screen
  • Panasonic WJ-NV300 | Operating Instructions - Page 95
    camera. (☞ Page 104) w Status display panel Displays the statuses of the recorder. Also displays alarm/error status and remedies. (☞ Page 98) When clicking right ("R-Upper") and lower-right ("R-Lower"). The default display position is "R-Upper". (Default: Upper right). Date & time will be displayed
  • Panasonic WJ-NV300 | Operating Instructions - Page 96
    the "Cam. select" under "Sub monitor". In the image display area, the startup screen to be displayed upon login (default screen) can be set for each login user individually. The available screens that can be set as the default screen are as follows. Refer to page 62 for how to config- ure the
  • Panasonic WJ-NV300 | Operating Instructions - Page 97
    in wide view 4-screen display in wide view 9-screen display in wide view 16-screen display in wide view Note: • If any of the default screen other than "Cam.1" - "Cam.32" or "4Screen-A" - "4Screen-H" is selected, the 4-screen that automatically displays images from camera 1 to camera 4 will become
  • Panasonic WJ-NV300 | Operating Instructions - Page 98
    the process of RAID recovery Copying Formatting SD Formatting HDD In the alarm state In the error state Description Live images are being displayed. Recorded images are being played. Example Currently in the process of RAID recovery. Data is being copied. Copying progress is displayed in %. SD
  • Panasonic WJ-NV300 | Operating Instructions - Page 99
    Error log display button The error (trouble) logs are displayed on the operation Instructions of WJ-NVF30, WJ-NVF30W) Sub monitor (monitor for display of live images only) Important: • Configuration and operation of the recorder The recorder is not configured to display camera images by default. •
  • Panasonic WJ-NV300 | Operating Instructions - Page 100
    Basic operations To operate, use the mouse connected to the recorder to move the mouse cursor displayed on the main monitor and left-click the buttons or tabs displayed on the screen. (Hereinafter, "Left-click..." will
  • Panasonic WJ-NV300 | Operating Instructions - Page 101
    operations are also applied to the "Login" window and the window for entering a password. • Click the [×] button to close the window without determining the entered characters. page 59), login will be automatically performed by the user registered in "Auto login user" in the logged-out state. 101
  • Panasonic WJ-NV300 | Operating Instructions - Page 102
    Use an SD memory card Insert an SD memory card (option) Step 1 Open the SDHC/SD memory card slot cover. Pull the tab down. SDHC/SD memory card slot cover Step 2 Insert a SD memory card to the slot until it clicks. Hearing a click means that the card is properly inserted. When inserting an SD memory
  • Panasonic WJ-NV300 | Operating Instructions - Page 103
    enhance the security, change the default administrator name and password before running the recorder. Change the password periodically. Refer to page 63 for how to change the password. • To log out, click the [Logout] button on the operation screen. • When a user logs out during copying, the copying
  • Panasonic WJ-NV300 | Operating Instructions - Page 104
    from cameras will be displayed according to the configured settings. Live images from cameras are displayed via the recorder. Image data Network cameras Main monitor (HDMI) Recorder Sub monitor (BNC) Sub monitor (HDMI) It is possible to display live images on a 1-screen or on a multiscreen
  • Panasonic WJ-NV300 | Operating Instructions - Page 105
    ) Aqua: Image display area is displaying images Blue: C amera is registered and image dis- play area is not displaying images. Gray: Recording is not possible or camera is not registered. Camera title: Shows the first 8 characters of the previously entered camera title. (Character color
  • Panasonic WJ-NV300 | Operating Instructions - Page 106
    is registered and image dis- play area is not displaying images. Gray: R ecording is not possible or camera is not registered. Red: Event recording is being performed. Note: • It is possible to hide/display the multi-screen selection buttons on the operation panel. Refer to the "Configure
  • Panasonic WJ-NV300 | Operating Instructions - Page 107
    assigned to that position will disappear. • The assigned camera position is retained even if the recorder is rebooted (note however that initializing the settings will also reset the camera positions to the defaults). • The audio of the camera assigned to the top left position will be output. • If
  • Panasonic WJ-NV300 | Operating Instructions - Page 108
    full screen to the control screen, click the [Ctrl screen] button. →→ The display reverts to the control screen. The image display area corresponds to the default screen set up by the login user. When a wide view screen is set as the default screen, "4Screen-A" will automatically be applied. 108
  • Panasonic WJ-NV300 | Operating Instructions - Page 109
    being displayed will be output. (It is possible to fix audio to be output on "Audio output camera" under "Advanced setup" under "Monitor".) • At the default, black zones will be displayed on the top and bottom of images with the aspect ratio of 16:9. Refer to page 51 for the setting
  • Panasonic WJ-NV300 | Operating Instructions - Page 110
    switched as follows by clicking the 4-screen button: Camera 1 to 4 → camera 5 to 8 → camera 9 (image displayed in the top left segment only) → camera 1 to 4 • At the default, black zones will be displayed on the top and bottom of images with the aspect ratio of 16:9. Refer to page 51 for the setting
  • Panasonic WJ-NV300 | Operating Instructions - Page 111
    Display or hide the camera title It is possible to display/hide the camera title displayed on the monitor. Step 1 Each time the [OSD] button is clicked, the camera title displayed on the main monitor and the sub monitor (HDMI) will be hidden/displayed alternately. On-screen display button (OSD)
  • Panasonic WJ-NV300 | Operating Instructions - Page 112
    Operate the camera When displaying live images from a camera with the panning/tilting function on a 1-screen or 4-screen, the following camera operations are available. Note: • It may be impossible to operate the camera or some functions may be inoperable depending on the model of the camera. •
  • Panasonic WJ-NV300 | Operating Instructions - Page 113
    to locate the clicked point as the center point in the image display area. Note: • To enable operations in the displayed camera image from the recorder, check "Enable camera control with mouse" on the camera control panel. 113
  • Panasonic WJ-NV300 | Operating Instructions - Page 114
    available zooming factors may be different. Refer to the operating instructions of the camera for further information. Step 1 When displaying the x1. Note: • To enable operations in the displayed camera image from the recorder, check "Enable camera control with mouse" on the camera control panel.
  • Panasonic WJ-NV300 | Operating Instructions - Page 115
    ). Patrol: The camera will trace the manually recorded panning pattern. Step 4 Click the [Start ] button to start the selected auto mode function. Click the [Stop] button to turn off the auto mode function. Note: • Refer to the operating instructions
  • Panasonic WJ-NV300 | Operating Instructions - Page 116
    camera preset positions Register the current camera position as a preset position. The preset positions can be registered only when using a camera supporting the preset position function. Step 1 When displaying the images on a 4-screen, select the desired cameras. Step 2 Click the [Detail] button
  • Panasonic WJ-NV300 | Operating Instructions - Page 117
    "Camera control [Advanced]" panel. Note: • On some Panasonic camera models, preset posi- tion number 0 is registered as txt" on the provided CD-ROM about the supported cameras. Execute auto back focus The auto about this function, refer to the operating instructions of the camera in use. Step 1
  • Panasonic WJ-NV300 | Operating Instructions - Page 118
    the [Reset] button. Zoom/Focus adjustment Adjust zooming or focusing of the camera. For further information about this function, refer to the operating instructions of the camera in use. Step 1 Click the [Setup] button. →→ The zoom/focus adjustment screen will be dis- played. Step 2 Zooming can
  • Panasonic WJ-NV300 | Operating Instructions - Page 119
    angle adjustment, horizontal adjustment of image clipping position can be performed. For further information about this function, refer to the operating instructions of the camera in use. Step 1 Click the [Setup] button. →→ The initial position setup window will be dis- played. Step 2 Adjust
  • Panasonic WJ-NV300 | Operating Instructions - Page 120
    an alarm from a PC, etc. via a network. • Face matching alarm: Alarm issued when a face contained in a live image matches an already registered facial image. Important: • Face matching alarm does not apply event recording. Note: • Refer to the Operating Instructions of the Additional Business
  • Panasonic WJ-NV300 | Operating Instructions - Page 121
    PC according to the in accordance with the settings made under [Panasonic Panasonic alarm protocol alarm protocol]. (☞ Page 41, 57) setting operating instructions of the camera in use. Stop buzzer beeping The buzzer sounding to announce an alarm or error can be stopped from the recorder's
  • Panasonic WJ-NV300 | Operating Instructions - Page 122
    off. Cancel the error action When an error (trouble) occurred on the recorder, the recorder will take the error action (a series of actions remedial action by following the instructions displayed on the error log panel (☞ page 131). The error indicator on the front of the recorder will go off when
  • Panasonic WJ-NV300 | Operating Instructions - Page 123
    images Live images can be recorded on the recorder. Images from up to 32 cameras can be simultaneously recorded with this recorder. Network cameras Image data HDD Recorder Record images (schedule recording) Recording can be automatically started and stopped according to a previously specified
  • Panasonic WJ-NV300 | Operating Instructions - Page 124
    Display the images recorded on the recorder's hard disk on the main monitor. Playback operation can be made while recording. Playback of images In this case, pause and then restart playback (☞ page 125). • At the default, black zones will be displayed on the top and bottom of images with the aspect
  • Panasonic WJ-NV300 | Operating Instructions - Page 125
    paused. When the previous image button is clicked during a pause, the previous frame is played and paused. Note: • When playing H.264 images, some frames of recorded images will not be displayed. Reverse frame-by-frame playback will be performed with the refresh interval setting of the camera. 125
  • Panasonic WJ-NV300 | Operating Instructions - Page 126
    etc. will be displayed. The playback speed will be displayed in fast forward/fast reverse mode. When this button is clicked during playback, the recorded images will be displayed on a full screen. Clicking the [Ctrl screen] button during playback on a full screen will return the image display to the
  • Panasonic WJ-NV300 | Operating Instructions - Page 127
    point It is possible to start playback from a designated date & time or the latest recorded image. Play image recorded at a designated date & time Start playback by designating the date & time of a recorded image on the date & time operation panel. Date & time operation panel (normal display
  • Panasonic WJ-NV300 | Operating Instructions - Page 128
    1 Click the [Go to last] button. →→ Playback of the latest recorded images will start. The date & time operation panel will change to playback Go to last] button while displaying images on a 4-screen, the recorded image may not be displayed depending on the timing. In this case, click the [
  • Panasonic WJ-NV300 | Operating Instructions - Page 129
    . Refer to the "readme.txt" on the provided CDROM about the supported cameras. Refer to the operating instructions of the camera in use for further information. [Information/VMD] When this box is checked, the time zone recorded when the VMD function was activated (motion was detected in an image
  • Panasonic WJ-NV300 | Operating Instructions - Page 130
    the amount of time specified under [Jump interval]. Available ranges: 10 s/ 15 s/ 30 s/ 60 s/ 180 s/ 300 s [Playback of audio] This item is displayed when the recorder is set up to lock in a camera with audio output. If this checkbox is marked, the audio associated with the displayed image will be
  • Panasonic WJ-NV300 | Operating Instructions - Page 131
    image and play it. There are the following 2 searching methods. • Play images selected from alarm and error logs (Log search) • Search and play images recorded triggered by the motion detection of the camera (VMD search) Play images selected from logs (log search) Display the alarm log list or error
  • Panasonic WJ-NV300 | Operating Instructions - Page 132
    Search and play recorded images triggered by motion detection (VMD search) Search images recorded with a camera supporting the VMD search function readme.txt" on the provided CD-ROM about the supported cameras. Refer to the operating instructions of the camera in use for further information. Step
  • Panasonic WJ-NV300 | Operating Instructions - Page 133
    more than 100 logs are filed in the search result, "> 100" will be displayed. • The VMD search function searches the entire camera image by default. To designate a search area, click the [Setup] button next to [Detection area / Mask duration] on the "VMD search setup" panel. (☞ Page 134) • It may
  • Panasonic WJ-NV300 | Operating Instructions - Page 134
    is set. To set, click the [C] button next to [Mask duration setup] on the advances setup panel. Mask duration: 1 s/ 5 s/ 10 s/ 30 s/ 1 min/ 5 min/ 10min Default: 1 s Step 3 Click 2 points of the upper left and lower right to create a square to be set as the area on the displayed image. →→ The set
  • Panasonic WJ-NV300 | Operating Instructions - Page 135
    user via a network • When the media other than hard disk drives is selected The copied recorded images can be played on the recorder or on a PC using the dedicated viewer software. The viewer software of the settings of the recorder is changed • When a user who started manual copy logged out (It will
  • Panasonic WJ-NV300 | Operating Instructions - Page 136
    web browser when it has already been opened by another user. When copying is already underway, the copy cancel window password protected. Free The remaining space of the storage medium will be displayed. Data size The total volume of all recorded images to be copied (including the viewer software
  • Panasonic WJ-NV300 | Operating Instructions - Page 137
    password, check "Memorize password temporarily". The next time data is copied, the password entry window will open with the password already filled in. The password will be retained in memory until the power of the recorder performed in the following order: Viewer Software → Images → Audio Depending
  • Panasonic WJ-NV300 | Operating Instructions - Page 138
    will be displayed. When formatting is completed, the format completion window will be displayed. Important: • Do not turn off the power of the recorder while formatting is in progress. Step 3 Click the [Execute >] button for "SD card format". →→ The confirmation window will be displayed. 138
  • Panasonic WJ-NV300 | Operating Instructions - Page 139
    Insert an SD memory card on which the recorded data are copied. (☞ Page 102) Step 2 Select [SD] of the "Disk/Medium" on the playback operation panel. →→ is password protected, the password entry screen will be displayed. Enter the assigned password, and click the [OK] button. If the wrong password is
  • Panasonic WJ-NV300 | Operating Instructions - Page 140
    conform to the settings of the recorder. When using the recorder with the default (IP address:192.168.0.250), set the IP address of the PC to "192.168.0.xxx (a number from 2 to 254 except 250 (this recorder))". The settings described in these operating instructions are based on the standard settings
  • Panasonic WJ-NV300 | Operating Instructions - Page 141
    status and tasks". Step 4 Click [Properties] →→ The "Network and Sharing Center" window will be displayed. Step 3 Click "Local Area Connection". →→ The "Local Area Connection Properties" window will be displayed. Step 5 Click "Internet Protocol
  • Panasonic WJ-NV300 | Operating Instructions - Page 142
    IP address" and "Subnet mask" as follows: • IP address: 192.168.0.9 • Subnet mask: 255.255.255.0 Depending on the network configuration, it is necessary to configure "Default gateway". Contact the system administrator for further information about the settings. Step 7 Click the [OK] button and close
  • Panasonic WJ-NV300 | Operating Instructions - Page 143
    the web browser for added security. • Change the administrator password periodically for added security. Enhance network security It is possible to enhance the network security by dividing the subnet using a router to authenticate users twice (by the recorder and by the router). When connecting the
  • Panasonic WJ-NV300 | Operating Instructions - Page 144
    : 192.168.1.1 Subnet mask: 255.255.255.0 Router IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 PC Network Router IP address: 192.168.0.1 Subnet mask: 255.255.255.0 Firewall Switching hub COPY MOUSE Recorder IP address: 192.168.0.250 Subnet mask: 255.255.255
  • Panasonic WJ-NV300 | Operating Instructions - Page 145
    images from the camera will be displayed. Follow the instructions of the wizard. • The ActiveX control and the viewer software (☞ page 172) will be installed at the same time. • When any ActiveX control for a Panasonic recorder other than this product is already installed, uninstall "WebVideo
  • Panasonic WJ-NV300 | Operating Instructions - Page 146
    . At the default, the aspect ratio of each screen segment is 4:3. Refer to page 51 for the setting to change the aspect ratio to 16:9. Download operation area Downloads the images currently being played and the viewer software. Status display area The current status of the recorder such as playback
  • Panasonic WJ-NV300 | Operating Instructions - Page 147
    folder to store the current playing images. HDD/SD [Copy] box Select [HDD] for "Disk/Medium" to display this button. The copy data window will be displayed by clicking this button. Use this button to manually copy recorded images onto an SD memory card or an external storage device. [Log] box Select
  • Panasonic WJ-NV300 | Operating Instructions - Page 148
    Date & Time: Date & time when an event or trouble occurred will be displayed. Log: Details of the occurred Error logs: Up to 1000 Access logs: Up to 100 Network log: Up to 100 Clicking date & time in the and then click the previous record button. • The corresponding recorded data that is displayed in
  • Panasonic WJ-NV300 | Operating Instructions - Page 149
    " page. Perform registration of network cameras. [Extra function] button Download the statistics data of the additional business intelligence functions. (This button will be displayed after registering the license for the recorder.) Refer to the Operating Instructions of the Additional Business
  • Panasonic WJ-NV300 | Operating Instructions - Page 150
    is being displayed. : Indicates that recorded images/audio are being downloaded. : Indicates that downloading of recorded images/audio is completed. [Step 1] a user with a higher priority is currently operating the camera. : Indicates that copying is being performed. : Indicates that recorded images
  • Panasonic WJ-NV300 | Operating Instructions - Page 151
    operation is available only during playback on a 1-screen. (☞ Page 169) [Download] button Downloads recorded images and audio at the designated date & time. [Viewer] button Download the viewer software for playing the downloaded images and audio. [CAM] tab When displaying live images from a camera
  • Panasonic WJ-NV300 | Operating Instructions - Page 152
    and displays live images. [Go to last] button The starting point of playback is approx. 30 seconds before the date & time of the latest recorded images. [Date search] box Start playback by designating the desired date & time of image. Click the [C] button and determine the desired date & time
  • Panasonic WJ-NV300 | Operating Instructions - Page 153
    image of the camera currently being displayed. Use digital zoom Enlarges the displayed live images. When playing recorded images on a 1-screen, click a button in the [Digital zoom] box. [x1] button: Displays live images with x1 zoomed size. [x2] button: Displays live images with
  • Panasonic WJ-NV300 | Operating Instructions - Page 154
    on the [HDD] tab while displaying live images will start playback from a point around 30 seconds before the latest recorded image of the camera currently being displayed. • When playing recorded images on a 4-screen, the audio of the camera assigned to the top left screen segment will be output
  • Panasonic WJ-NV300 | Operating Instructions - Page 155
    (that is determined on the camera's setup menu and registered in the recorder). • Auto mode: Activates the auto mode function of the camera. To the available zooming factors may be different. Refer to the operating instructions of the camera for further information. Zooming can be adjusted by
  • Panasonic WJ-NV300 | Operating Instructions - Page 156
    possible to reset the adjusted brightness by clicking the [Reset] button. Register preset positions Registers the current camera position as a preset position. Camera supporting the preset position function can be used. Step 1 Perform the pan/tilt operation to move the camera to the position to be
  • Panasonic WJ-NV300 | Operating Instructions - Page 157
    : The camera will trace the manually recorded panning pattern. Step 2 Click the [Start] button to start the selected auto mode function of the camera. Click the [Stop] button to turn off the auto mode function. Note: • Refer to the operating instructions
  • Panasonic WJ-NV300 | Operating Instructions - Page 158
    alarm from a PC, etc. via a network. Face matching alarm*: Alarm issued when a recorder is set up for use of this function. Refer to the Operating Instructions Panasonic alarm protocol" setting. To receive a notification and display the contents, it is necessary to install the dedicated software
  • Panasonic WJ-NV300 | Operating Instructions - Page 159
    action manually, click the [ALM] button in the status display area. →→ The alarm action will be canceled. The event recording will stop and return to the operational status just before the event occurred. Cancel the error action When an error (trouble) occurred on the recorder, the recorder will
  • Panasonic WJ-NV300 | Operating Instructions - Page 160
    of audio may not be performed correctly. To play audio correctly, use either the web browser or the viewer software and close the other. • When load to be processed is too heavy for the recorder (such as when many cameras are connected, images (live/playback) are displayed on many windows (segments
  • Panasonic WJ-NV300 | Operating Instructions - Page 161
    Approx. x48) → Step7 (Approx. x96) • The playback speed will be displayed on the playback status display. * When playing H.264 images, some frames of recorded images will not be displayed. Fast playback/fast reverse playback of images will be performed with the refresh interval setting of the camera
  • Panasonic WJ-NV300 | Operating Instructions - Page 162
    in the status display area, and playback will start from the image corresponding to the designated date & time. (About playback operation: "Play recorded images" (☞ page 161)) Note: • When playing H.264 image by designating date & time, playback may start from a point several seconds before or after
  • Panasonic WJ-NV300 | Operating Instructions - Page 163
    event and play it back. Important: • To use recording event search, "HDD" must be selected for [Disk/Medium]. It is also possible to filter recording events using the search filters. • Face matching alarm cannot be played back by recording event search on the web browser. Start playback from the
  • Panasonic WJ-NV300 | Operating Instructions - Page 164
    will be displayed. [Evt] Event type will be displayed. (☞ Page 163) [HDD] The hard disk drive number in which the corresponding recorded images are stored will be displayed. [Audio] When audio is attached to recorded images, the audio icon will be displayed. Note: • The [All list] button will become
  • Panasonic WJ-NV300 | Operating Instructions - Page 165
    corresponding recorded images. Important: • To perform the VMD search, it is necessary to configure the settings of the connected cameras that support on the provided CD-ROM about cameras supporting the VMD search function. Refer to the operating instructions of the camera in use for further
  • Panasonic WJ-NV300 | Operating Instructions - Page 166
    )) Note: • Up to 100 logs are saved in the list. When more than 100 logs are filed in the search result, "> 100" will be indicated. • Recorded images will be played on a 1-screen. To play on a multi-screen, click the [Multiscreen] button after starting playback. • When starting the VMD search while
  • Panasonic WJ-NV300 | Operating Instructions - Page 167
    the alteration detection code to the recorded images to be copied. When the alteration detection code is attached, it is possible to check if the copied recorded images have been altered or not when playing the copied recorded images using the viewer software. Click the [C] button, and then select
  • Panasonic WJ-NV300 | Operating Instructions - Page 168
    and enter a password. (5 to 8 alphanumeric characters) The password will be . • Copying will be performed in the following order: Viewer Software → Images → Audio Depending on the designated time range capacity. • When another user operating the recorder has opened the copy panel or when the
  • Panasonic WJ-NV300 | Operating Instructions - Page 169
    on how to play downloaded recorded images. Important: • Note when downloading that, due to limitations of Internet Explorer, the free disk space of the PC detection code to recorded images to be downloaded. When assigning a password, enter 5 to 8 alphanumeric characters for the password. When the
  • Panasonic WJ-NV300 | Operating Instructions - Page 170
    button on the top page (☞ page 146) of the operation window. Step 3 Select "SD" for "Disk/Medium" in the [Search] box, and then click the [Copy data] button. [Camera] Searches for images recorded with each selected camera. Mark the checkbox corresponding to the desired camera. When the checkbox for
  • Panasonic WJ-NV300 | Operating Instructions - Page 171
    memory card. It may damage data on the SD memory card. Note: • When checking a list after inserting the other SD memory card, select "HDD" for "Disk/Medium" in the [Search] box first and then select "SD". • Refer to page 172 for information on how to play copied images. 171
  • Panasonic WJ-NV300 | Operating Instructions - Page 172
    with recorded images. Copying on an SD memory card Folder: [Drive]: \PRIVATE \MEIGROUP \PSS \NVR \ND_Viewer When the copy destination is an external storage device Folder: [Drive]: \Panasonic\NVR\ND_Viewer Refer to page 174 for how to use the viewer software. Note: • The viewer software copied
  • Panasonic WJ-NV300 | Operating Instructions - Page 173
    When the older version of the viewer software is installed on a PC, uninstall it before installing the newer version. Step 1 Double-click the downloaded file (wvasetup.exe). →→ The installer launches. Follow the instructions of the installation wizard. Note: • If agreed to the displayed license
  • Panasonic WJ-NV300 | Operating Instructions - Page 174
    start menu ("All programs" - "Panasonic" - "Network Disk Recorder" - "ND_ Viewer") or double-click the ND_Viewer icon on the desktop. For images copied on an SD memory card or external storage devices, double-click the executable file (ND_ Viewer.exe) to launch the viewer software (see page 172 for
  • Panasonic WJ-NV300 | Operating Instructions - Page 175
    is a data in the same directory as the viewer software or the "data" folder in the same directory data. Playback downloaded images Use the playback operation button to play downloaded images. If of password protected data, the password entry screen will be displayed. Enter the required password.
  • Panasonic WJ-NV300 | Operating Instructions - Page 176
    169) if a code for alteration detection has been attached to the downloaded data. When data to which the alteration code has been added be copied and saved. Note: • It is not possible to operate the viewer software while copy is in progress. Print the displayed image Print the image displayed in
  • Panasonic WJ-NV300 | Operating Instructions - Page 177
    will be canceled. Important: • If the settings are applied, other login users will be forcibly logged out. • If the settings relating to the user management are applied, all login users will be forcibly logged out. • Recording may not be performed for around 4 seconds just after the settings are
  • Panasonic WJ-NV300 | Operating Instructions - Page 178
    Update the firmware To update the firmware of the recorder to the latest version, proceed as follows. Refer to page 68 for the operations when the firmware is saved on the SD memory card. Step 1 Download the firmware of the latest version onto a hard disk drive of a PC. Step 2 Click the [Maintenance
  • Panasonic WJ-NV300 | Operating Instructions - Page 179
    following mail will be sent to notify of a trouble occurrence to a registered address when the trouble occurs. NV300 (192.168.0.250) Status notification Occurrence date and (y indicates the fun number) CAM xx COMMUNICATION ERROR Network camera error detection (audio): CAM xx COMMUNICATION ERROR(
  • Panasonic WJ-NV300 | Operating Instructions - Page 180
    Indication Status Description RAID5 1down: RAID5 2down: RAID6 1down: RAID6 2down: RAID6 3down: HDD RAID5 Recovery failure: HDD RAID6 Recovery failure: Copy media FULL: Number of data on the copy medium exceeded: Starting mirroring recovery Starting RAID5 recovery Starting RAID6 recovery Complete
  • Panasonic WJ-NV300 | Operating Instructions - Page 181
    the system may not be authorized to display the images from cameras. 60 Check the user level settings of these users. • Is the audio encoding format of the camera set to "G.726(32kbps)"? This recorder supports "G.726(32kbps)" only. Check − the setting of the connected camera. • Is other than
  • Panasonic WJ-NV300 | Operating Instructions - Page 182
    using the viewer software. Cannot play the downloaded recorded images. software and cancel the pop-up blocker. • Are the correct user name and password entered? Confirm the correct user name and password. Installation Guide Installation Guide 52 − 52 52 − − − 61, 62 • When playing images recorded
  • Panasonic WJ-NV300 | Operating Instructions - Page 183
    to launch the viewer software by dragging and dropping multiple after launching the viewer software. − files onto updating the driver does not solve the problem, adjust the hardware acceleration as follows. resolution" window. 3. Select the [Troubleshoot] tab, and click the [Change settings
  • Panasonic WJ-NV300 | Operating Instructions - Page 184
    system in use, the following may occur. Follow the instructions below when the following occurred. By performing the following solutions Panasonic System Networks Warning" window. Co., Ltd.'. Click here to install..." • Click the information bar and select "Download File...". When downloading
  • Panasonic WJ-NV300 | Operating Instructions - Page 185
    automatically when an event occurs. Event recording includes Pre-event recording that records images before the event and event recording that records images after the event. Default gateway Network device used as a gateway for networks, such as a local network, to access PCs on an external
  • Panasonic WJ-NV300 | Operating Instructions - Page 186
    1280 x 720 pixels. HDD Stands for Hard Disk Drive (a high capacity storage device). This product uses hard disk drives instead of video tapes for recording. IP address (Internet Protocol Address) The identification number assigned to PCs connected via IP networks such as the Internet or an Intranet
  • Panasonic WJ-NV300 | Operating Instructions - Page 187
    . It authenticates passwords and user accounts between SMTP servers and clients. Both SMTP servers and clients must support SMTP authentication. SMTP server A server that supports SMTP, currently the most widely used mail transfer protocol. RAID6 Even if 2 HDDs become faulty, recorded images can be
  • Panasonic WJ-NV300 | Operating Instructions - Page 188
    (Transmission Control Protocol/Internet Protocol) The standard network protocol for the Internet and Intranets. Time & time of motion detection in recorded images. VPN Service used to make public lines as data for exchanging. Web browser A software application which enables to display web pages.
  • Panasonic WJ-NV300 | Operating Instructions - Page 189
    (905)624-5010 www.panasonic.ca For Europe and other countries: Panasonic Corporation http://panasonic.net Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany © Panasonic System Networks Co., Ltd. 2014
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Operating Instructions
Network Disk Recorder
Model No.
WJ-NV300K
WJ-NV300K/G
(This illustration represents WJ-NV300K.)
Network Disk Recorder WJ-NV300
ERROR
REC
OPERATE
ALARM
BUZZER STOP