Panasonic WVCS564 WVCS564 User Guide

Panasonic WVCS564 - COLOR CCTV CAMERA Manual

Get Panasonic WVCS564 - COLOR CCTV CAMERA PDF manuals and user guides View all Panasonic WVCS564 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic WVCS564 manual content summary:

  • Panasonic WVCS564 | WVCS564 User Guide - Page 1
    Color CCTV Camera Operating Instructions WV-CS564 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
  • Panasonic WVCS564 | WVCS564 User Guide - Page 2
    operating and maintenance (servicing) instructions in the literature accompanying the appliance. For U.S.A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital accordance with the instruction manual, may cause
  • Panasonic WVCS564 | WVCS564 User Guide - Page 3
    not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
  • Panasonic WVCS564 | WVCS564 User Guide - Page 4
    The camera incorporates the Digital Signal Processor, pan-tilt mechanism, x18 zoom lens and RS485 communications in a compact enclosure. FEATURES • High quality picture of 768 x 494 pixels • Minimum illumination of 2 lx (at AGC High) • Protocol adaptability to Panasonic's protocol • A run of manual
  • Panasonic WVCS564 | WVCS564 User Guide - Page 5
    data of WV-CS564 is uploaded to other models (e.g. WV-CS854 series), an error may occur and uploading may not be completed successfully. PRECAUTIONS 1. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside
  • Panasonic WVCS564 | WVCS564 User Guide - Page 6
    are subject to wear with time. About replacement and maintenance of such parts, please ask the nearest service center. 12. Do not aim the camera at the same object for a long time. Burn-in of an image may be caused on the fluorescent screen of CRT. • Matsushita Electric Industrial Co.,
  • Panasonic WVCS564 | WVCS564 User Guide - Page 7
    CONSTRUCTION y u q w e r t i o q Not Used w Not Used e Video Output Connector r Data Port t Power Cable 7 !0 y Camera Mounting Base u Panning Starting Point i Fall Prevention Wire o Decoration Cover !0 Dome Cover
  • Panasonic WVCS564 | WVCS564 User Guide - Page 8
    ON/OFF Learning Display Cleaning Display BLC BLC OFF ON Manual Level Adjustment Manual Mask Area Selection Manual Iris Adjustment Manual Level Adjustment Manual Level Adjustment Camera Menu RS-485 Setup To A CAMERA ID Editing Light Control Shutter Speed AGC Mode Selection AF
  • Panasonic WVCS564 | WVCS564 User Guide - Page 9
    the individual controllers. For details, see the manual for the controller to be used. The switches and controls are abbreviated Switch Right Switch OPERATE REMOTE ALARM NORMAL PROG RESET SYSTEM 70 ALARM OFF Camera Controller WV-RM Left Switch Down Switch Notes: • A changed parameter is entered only
  • Panasonic WVCS564 | WVCS564 User Guide - Page 10
    Return (SELF RETURN) Self-return is the time-out parameter for returning to the home position. The camera returns to AUTO MODE if it is set to ON when a specific time has elapsed after a manual operation. See page 22 for the setting. q Auto Mode (AUTO MODE) The auto mode is used for
  • Panasonic WVCS564 | WVCS564 User Guide - Page 11
    mode when the controller is turned off. REMOTE: The camera stops operating in the auto mode approx. 1 minute after the controller is turned off. See page 25 for the setting. q Patrol Learn and Patrol Play (PATROL) A set of manual operations is stored (LEARN), reproduced (PLAY) or turned inactive
  • Panasonic WVCS564 | WVCS564 User Guide - Page 12
    or BLC OFF) of backlight compensation. Backlight compensation is available for the ALC mode. It eliminates strong background light which makes the camera picture dark such as a spotlight. MANUAL: The lens iris is fixed at the value that you have set regardless of the brightness of the object. • ALC
  • Panasonic WVCS564 | WVCS564 User Guide - Page 13
    (multiplexed vertical drive signal with the composite video output signal) from a specified component. Whenever the VD2 signal is supplied to this camera, the camera automatically switches to the VD2 sync mode. When you select the line-lock sync (LL) mode, you can set vertical phase adjustment
  • Panasonic WVCS564 | WVCS564 User Guide - Page 14
    000 K. See page 34 for the setting. (7) Auto Focus (AF MODE) The camera adjusts the focus automatically by sensing sharpness in the center of the picture. S, is pressed. AUTO S, M, L: Auto-focus is activated automatically while operating manually: pan, tilt or zoom. (8) Electronic Zoom (EL-ZOOM) Up
  • Panasonic WVCS564 | WVCS564 User Guide - Page 15
    Press the CAM SETUP key for 2 seconds or more to open the SETUP menu. WV-CU161 Press the CAMERA SETUP key for 2 seconds or more to open the SETUP menu. WV-RM70 1. Turn the MODE SELECTION switch to NORMAL or ALARM OFF. 2. Press the PROG switch for 2 seconds or more to open the
  • Panasonic WVCS564 | WVCS564 User Guide - Page 16
    AUTO PAN KEY AUTO PAN LOCAL/REMOTE LOCAL PATROL STOP CLEANING OFF CAMERA RS485 SET UP Setup menu ** SET UP MENU ** PRESET 1 MAP FLOOR1 DOOR 17 Preset setting menu PRESET NO. 1* POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE PRESET SPEED ON ALC 10S OFF L H RET DEL
  • Panasonic WVCS564 | WVCS564 User Guide - Page 17
    Caution: The preset data for other camera models (WV-CS650 for example) is incompatible with WV-CS564's. WV-CS564's preset data will be destroyed WV-CS564 to the default settings. Download the factory settings into the controller and upload the correct preset data newly to the initialized WVCS564.
  • Panasonic WVCS564 | WVCS564 User Guide - Page 18
    OFF. ON: Preset ID appears on the monitor screen. OFF: Preset ID does not appear. Preset setting menu PRESET NO. 1* POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE PRESET SPEED ON ALC 10S OFF L H 2. Press the CAM (SET) key to display the preset ID setting menu. RET DEL To
  • Panasonic WVCS564 | WVCS564 User Guide - Page 19
    The lens iris is automatically adjusted to suit the brightness of the object. MANUAL: The lens iris is fixed at the set value regardless of the brightness of the monitor screen. See page 30 for the setting. 3. In case of MANUAL Press the CAM (SET) key. The setting menu appears on the monitor screen
  • Panasonic WVCS564 | WVCS564 User Guide - Page 20
    FILE PRESET SPEED ON ALC 10S 1 L H RET DEL Scene file setting menu ** SCENE FILE 1 ** SHUTTER AGC WHITE BAL AF MODE OFF ON(MID) ATW MANUAL S RET q Preset Speed Setting (PRESET SPEED) • Move the cursor to PRESET SPEED and select a speed by moving the joystick to the right or left
  • Panasonic WVCS564 | WVCS564 User Guide - Page 21
    RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN LOCAL/REMOTE LOCAL PATROL STOP CLEANING OFF CAMERA RS485 SET UP Preset setting menu PRESET NO. 1* POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE PRESET SPEED ON ALC 10S OFF L H RET DEL PRESET NUMBER SET menu ** PRESET
  • Panasonic WVCS564 | WVCS564 User Guide - Page 22
    camera can be operated only manually. SEQ: The camera operates in the sequence of preset positions in numerical order. SORT: The camera . In this case, pan the camera fully several times. If this does not eliminate the problem, refer servicing to qualified service personnel. Setup menu ** SET UP
  • Panasonic WVCS564 | WVCS564 User Guide - Page 23
    is not limited. Starting point Self-end range of pan limit Note: When ON is selected for PAN LIMIT, manual pan moves the camera away from the other side (PAN LIMIT) of the start-end range. 6. To set ENDLESS to ON/OFF Move the cursor to ENDLESS, and move
  • Panasonic WVCS564 | WVCS564 User Guide - Page 24
    , WVCU360, WV-CU161, WJ-FS616 or WV-CU550 series is connected. Make sure that LOCAL is selected in this case. Setup menu ** SET UP MENU ** PRESET 1 MAP HOME POSITION OFF SELF RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN LOCAL/REMOTE LOCAL PATROL STOP CLEANING OFF CAMERA RS485 SET
  • Panasonic WVCS564 | WVCS564 User Guide - Page 25
    patrol learn mode starts. • PAN/TILT/ZOOM/FOCUS • IRIS • SHUTTER • AGC • WHITE BALANCE • IMAGE HOLD • CAMERA ID • PAN LIMIT • CLEANING After starting the patrol learn, the following manual operations are stored. • PAN/TILT/ZOOM/FOCUS operation • IRIS operation • Preset positioning 2. Open the SET UP
  • Panasonic WVCS564 | WVCS564 User Guide - Page 26
    the memory. 2. Press the PATROL STOP key and PROGRAM key simultaneously or any manual operation key (e.g., PAN/TILT/ZOOM/FOCUS) except the iris keys to stop playback. Notes: • During the patrol play mode, the camera movement may occasionally deviate from the entered routine when the routine includes
  • Panasonic WVCS564 | WVCS564 User Guide - Page 27
    when it is over. OFF: No contact cleaning. Note: Select OFF when the camera downloads or uploads the preset data. Special 1 menu ** SET UP MENU ** LOCAL PATROL STOP CLEANING OFF CAMERA RS485 SET UP ** SET UP ** CAMERA ID OFF ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE
  • Panasonic WVCS564 | WVCS564 User Guide - Page 28
    allows you to edit or correct a specific character. • When you want a blank space in the CAMERA ID, move the character cursor to SPACE, and press the CAM (SET) key. • When you CAM (SET) key. ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE
  • Panasonic WVCS564 | WVCS564 User Guide - Page 29
    . Note: The backlight compensation submenu associated with this menu is described separately and should be set up after installing the camera at the site and observing the actual site picture. 3. When MANUAL is selected, quit the setup menu by pressing MON (ESC) key. Press OPEN or CLOSE key on the
  • Panasonic WVCS564 | WVCS564 User Guide - Page 30
    select OFF. (When you select MANUAL, BLC is not available.) The masking area, press the F2 button of the WV-CU550B. (For the WV-RM70, press the right and left switches simultaneously.) return to the CAM SET UP menu. (To return to the camera picture, press the F4 button.) ** ALC CONT ** BACK LIGHT
  • Panasonic WVCS564 | WVCS564 User Guide - Page 31
    by operating the joystick: • When OFF is selected for BLC on the ALC CONT menu Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL OFF (1/60) 1/100 1/250 1/500 1/10 000
  • Panasonic WVCS564 | WVCS564 User Guide - Page 32
    OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC LL WHITE BAL ATW AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL SYNC menu
  • Panasonic WVCS564 | WVCS564 User Guide - Page 33
    the preset values at the factory, press the F2 button of the WV-CU550B. (For the WVRM70, press the Right and Left switches simultaneously.) V PHASE COARSE 1(1--16) FINE - + RET Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE
  • Panasonic WVCS564 | WVCS564 User Guide - Page 34
    balance setup. PUSH SW is highlighted to indicate that white balance is being set. Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL AWC AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL 4. PUSH SW returns to normal when
  • Panasonic WVCS564 | WVCS564 User Guide - Page 35
    S. S, M and L stand for Small, Middle and Large areas in the center of a scene that are used for sensing sharpness in auto-focusing. AUTO S AUTO M AUTO L MANUAL L MANUAL M MANUAL S MANUAL S, M, L: Brings the camera into focus when the AF key on the controller is pressed. AUTO S, M, L: Brings the
  • Panasonic WVCS564 | WVCS564 User Guide - Page 36
    in preset position setting mode. • To set preset position directly from the WV-CU360 System Controller, it is temporarily required setting the electronic zoom function to OFF. Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF
  • Panasonic WVCS564 | WVCS564 User Guide - Page 37
    . To reset to the factory setup, press the F2 button of the WVCU550B. (For the WV-RM70, keep pressing the Right and Left switches simultaneously for 2 seconds or more.) 38 Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE
  • Panasonic WVCS564 | WVCS564 User Guide - Page 38
    by using the joystick and press the F2 button of the WV-CU550B. (For the WV-RM70, WV-CU360 or WV-CU161, keep pressing the Right and Left switches simultaneously for 2 seconds or more.) (6) Camera Resetting (CAMERA RESET) Move the cursor to CAMERA RESET by using the joystick and press the F3 button
  • Panasonic WVCS564 | WVCS564 User Guide - Page 39
    the cursor over the desired mode and then press the F2 button of the WV-CU550B. (For the WV-RM70, keep pressing the Right and Left switches simultaneously for 2 seconds or more.) s RS485 Setup q Initial Camera Communication Parameters In an RS485 chain the matrix switcher, PC, controllers and
  • Panasonic WVCS564 | WVCS564 User Guide - Page 40
    100 ms] Default: ---- (no set). This menu appears only when a 2-line communication is used. Make sure to be 100 ms when connecting the camera with the WJ-FS616 Video Multiplexer or Matrix Switcher WJ-SX350 in a 2-line communication system. The settings become effective with the closing of the SET
  • Panasonic WVCS564 | WVCS564 User Guide - Page 41
    of installation and connection should be taken by qualified service personnel or system installers and should conform to all local codes. • Make sure to switch the camera off before installation and connection. • Do not install the camera near the air outlet of an air conditioner. 1. Disassembling
  • Panasonic WVCS564 | WVCS564 User Guide - Page 42
    the switch position corresponding to the unit number 1-96* is selected, setting should be made on the RS485 SET UP menu (see page 40). For Panasonic's Protocol Switch position ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON
  • Panasonic WVCS564 | WVCS564 User Guide - Page 43
    Switch position ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 Unit number 69 70 71 72 73 74 75 76 77 Switch position ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 Unit
  • Panasonic WVCS564 | WVCS564 User Guide - Page 44
    is not available for Full Duplex. (Only for Panasonic's system controllers) 3. Assemble the Camera Reverse the disassembly procedure. Take care not to cut sure to select a ceiling board strong enough to support 4 times the total weight of the camera. a. Sideway Cable Exit Prepare a cutout in the
  • Panasonic WVCS564 | WVCS564 User Guide - Page 45
    Tighten the fixing screw M3 (provided). Notes: (1) Tighten the camera fixing screw with a screwdriver. (2) Follow the instructions given here to ensure that the camera and camera mounting base are installed safely. (3) When removing the camera from the camera mounting base, loosen and press up the
  • Panasonic WVCS564 | WVCS564 User Guide - Page 46
    be made by qualified service personnel or system installers in accordance with all local codes. • See the reverse side of the cover page for mains lead connection. 24 V AC Data port Video output Not used 24 V AC cable RS485 cable Coaxial cable To VIDEO IN BNC plug (CAMERA IN) BNC plug Not
  • Panasonic WVCS564 | WVCS564 User Guide - Page 47
    • RS485 Connection Data transmission Data reception Brown Red Orange Yellow Green Note: Use the cable that is described below for RS485 site communication. • Shielded, twisted pair cable • Low impedance • Wire gauge size is thicker than AWG #22 (0.33 mm2). GND T (B) T (A) R (B) R (A) 49
  • Panasonic WVCS564 | WVCS564 User Guide - Page 48
    SYSTEM CONNECTIONS Color CCTV camera Max. 64 cameras Personal computer RS-232C port Alarm inputs Matrix SET IRIS PRESET CLOSE OPEN LEFT AF ZOOM FOCUS TELE NEAR RIGHT DOWN 550 WIDE FAR System Controller WV-CU B ALARM BUSY ACK RESET BACK FORWARD SEQ SEQ ALT AUX 12 DEC INC -1CAM +1CAM
  • Panasonic WVCS564 | WVCS564 User Guide - Page 49
    the camera manual 1 : 1.6 (WIDE) - 3.0 (TELE) 3.78 - 67.1 mm (17.8X) 3.2° - 51.7° 2.4° - 39.9° Electronic shutter AGC 1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 s ON (LOW)/ON (MID)/ON (HIGH)/OFF BLC Zoom ratio Iris range selectable ON/OFF (SETUP MENU) x 18 +digital
  • Panasonic WVCS564 | WVCS564 User Guide - Page 50
    Auto mode Auto pan key Camera ID PATROL Cleaning MANUAL/AUTO OFF/SEQ/SORT/AUTO PAN/PATROL SEQ/SORT/AUTO PAN/PATROL PLAY preset ID, camera ID: up to 16 ACCESSORIES Dome cover (approx. 60 % smoked type WV-CS2S Dome cover (approx. 50 % smoked type WV-CS2SH Dome cover (approx. 70 % metal type
  • Panasonic WVCS564 | WVCS564 User Guide - Page 51
    key. Pressing numeric key(s) for one digit up to three digits then CAM FUNCTION key implements the respective AUTO [8] + [6] + [CAM FUNC] MANUAL [8] + [7] + [CAM FUNC] AF On (Activate) [8] + [8] + [CAM FUNC] HOME POSITION Move to HOME [8] + [9] + [CAM FUNC] CAMERA ID On [9] + [3] + [CAM
  • Panasonic WVCS564 | WVCS564 User Guide - Page 52
    Security and Digital Imaging Company A Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Southern: 1225 Northbrook Parkway, Suite 1-160
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.
WV-CS564
Color CCTV Camera
Operating Instructions