Panasonic WVCS564 WVCS564 User Guide - Page 35
Auto Focus Setting AF MODE, MANUAL S, M, L, AUTO S, Notes
View all Panasonic WVCS564 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
q Auto Focus Setting (AF MODE) 1. Move the cursor to AF MODE, and select the following mode by moving the joystick to the right or left. The factory default setting is MANUAL S. S, M and L stand for Small, Middle and Large areas in the center of a scene that are used for sensing sharpness in auto-focusing. AUTO S AUTO M AUTO L MANUAL L MANUAL M MANUAL S MANUAL S, M, L: Brings the camera into focus when the AF key on the controller is pressed. AUTO S, M, L: Brings the camera into focus while operating pan, tilt or zoom manually. These may be selected in the same way as selecting MANUAL by pressing the AF key on the controller. 2. To confirm auto-focus operation, press CAM (SET) key while the cursor is at AF MODE. Notes: • The auto focus lens does not function properly in AUTO after using WIDE lens. • The auto focus lens may not function properly in AUTO under the following conditions. 1. Dirt or water on window glass. The auto focus may focus on the dirt or water. 2. Low lighting/illumination or zone marker is blinking. 3. Bright objects or high intensity objects. 4. Single color with unfigured object such as white wall or fine felt. 5. No center objects, sloping objects. 6. Far and near objects on the screen. Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL 36