Panasonic WVCW474F WVCW474F User Guide
Panasonic WVCW474F - COLOR CCTV CAMERA Manual
 |
View all Panasonic WVCW474F manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic WVCW474F manual content summary:
- Panasonic WVCW474F | WVCW474F User Guide - Page 1
instruction as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. PREFACE Panasonic's WV-CW474F/CW474S series color digital camera introduces - Panasonic WVCW474F | WVCW474F User Guide - Page 2
including AUTO, MANUAL and OFF 7. Built-in Digital Motion Detector 8. Auto black-and-white mode enables the camera to switch OFF INT HIGH AUTO1 SOFT ON LL !7 q Panning table Adjusts the panning angle of the camera. w Pan lock screw Fixes the panning position. e Tilting lock screw Fixes the tilting - Panasonic WVCW474F | WVCW474F User Guide - Page 3
for checking images. !8 !9 @0 @1 !8 Power cable !9 Video output cable with BNC connector Connects with the video connector of the monitor. @0 Dome cover @1 Camera mounting bracket The WV-CW474S is supplied with a mounting bracket for ceiling installation. Cautions: 1. Connect to 24 V AC (19.5 V-28 - Panasonic WVCW474F | WVCW474F User Guide - Page 4
for 6 minutes while a setup menu is being displayed on the monitor screen, it is automatically closed and the mode returns to the normal camera picture. 2. SETUP OPERATION This camera utilizes an on-screen user setup menu (CAM SET UP). To set items on the CAM SET UP menu, use the following buttons - Panasonic WVCW474F | WVCW474F User Guide - Page 5
character to be replaced by pressing I(L) or I(R). Then move the cursor to the character area and select a new character. 3. Press I(S) to determine the CAMERA ID. To erase all characters in the editing area Move the cursor to RESET and press I(S). All characters in the editing area disappear. To - Panasonic WVCW474F | WVCW474F User Guide - Page 6
the boundary between the bright and the dim scene. This is a natural phenomenon and does not indicate trouble. 3. Shutter Speed Setting (SHUTTER) Note: To select electronic shutter speed, select OFF for SUPER- the picture when the sensitivity of the camera is increased. This is a normal phenomenon. - Panasonic WVCW474F | WVCW474F User Guide - Page 7
dim. In these cases, select the AWC mode. ** CAM SET UP ** ↵↵ CAMERA ID OFF ALC ALC SHUTTER --- AGC ON(DNR-H) SENS UP OFF SYNC INT ↵ SW is being highlighted. 4. When you want to adjust the white balance manually, press I(R) to select AWC and press I(S). The AWC menu appears on the - Panasonic WVCW474F | WVCW474F User Guide - Page 8
Adjustment for AWC (ATW) You can set the white balance items manually. 1. To set MASK SET, proceed as described in steps 2 to . Therefore, when the camera is not used in a Panasonic Intelligent CCTV System, select OFF to prevent the above from occurring. • The camera will deactivate the detector for - Panasonic WVCW474F | WVCW474F User Guide - Page 9
as at night. 1. Move the cursor to BW. 2. Select AUTO1, AUTO2, ON or OFF using I(L) or I(R). The factory default setting is OFF. AUTO1: The camera selects black and white mode if the picture is dark, or color mode if the picture is bright enough. AUTO2: Applying AUTO1 may cause malfunction - Panasonic WVCW474F | WVCW474F User Guide - Page 10
-CW474S) OPTIONAL ACCESSORIES WV-CW1C Dome Cover WV-Q112 Camera mounting bracket (for WV-CW474F) Panasonic Security and Digital Imaging Company A Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Northeast
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
1.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user-serviceable parts inside.
Ask qualified service personnel for servic-
ing.
2.
Handle the camera with care.
Do not abuse the camera.
Avoid striking, shaking, etc.
The camera could be damaged
by improper handling or storage.
3.
Do not expose the camera to rain or moisture, not try to operate it in wet areas.
If the camera becomes wet, turn the power off immediately and ask qualified service
personnel for servicing. Moisture may damage the camera and also cause electric
shock.
4.
Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. When the dirt is hard to remove, use a
mild detergent and wipe gently. Then wipe off the remaining detergent with a dry cloth.
5.
Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents.
Use lens tissue or a cotton
tipped applicator and ethanol.
6.
Never face the camera towards the sun.
Do not aim the camera at bright objects.
Whether the camera is in use or not, never
aim it at the sun or other extremely bright objects.
Otherwise, blooming or smear may
be caused.
7.
Do not operate the camera beyond the specified temperature, humidity or power
source ratings.
Use the camera at temperatures within –10 °C to +50 °C (14 °F - 122 °F), and humidity
below 90 %.
The input power source is 24 V AC.
8.
Turn the circuit breaker off which supplies the camera with the power when
abnormal conditions are encountered.
PRECAUTIONS
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended to
alert the user to the presence
of uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
SA 1966
SA 1965
N1101-1121
V8QA5931BN
Printed in Japan
N
19
Panasonic's WV-CW474F/CW474S series color digital camera introduces a new level of high
picture quality and high resolution through the use of a 1/3-inch interline transfer CCD image
sensor having 768 horizontal pixels (picture elements), and digital signal processing LSIs.
This model offers cutting-edge technology for advanced video surveillance.
PREFACE
Caution:
To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for
the 24 V AC Input Cable.
Color CCTV Cameras
Operating Instructions
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
NOTE: This equipment has been tested and
found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence when the equipment is operated in a
commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required to correct
the interference at his own expense.
FCC Caution: To assure continued compli-
ance, (example - use only shielded interface
cables when connecting to computer or
peripheral devices). Any changes or modifica-
tions not expressly approved by the party
responsible for compliance could void the
user’s authority to operate this equipment.
For U.S.A
Model No.
WV-CW474F
WV-CW474S