Pantech Breeze III Manual - English - Page 12
Installing/removing SIM card, and battery, To charge your, battery - covers
View all Pantech Breeze III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing/removing SIM card and battery 1. Remove the battery cover from the unit. To fit the battery cover, put it on the guide rail and push up. Correct Incorrect 18 2.Insert the SIM card into the slot. The gold contacts of the SIM card should go against the metal contacts of the phone. Put the contacts of the battery into the hole located at the bottom of the unit and then insert and press the upper side of the battery until you hear the "click". Make sure you align the gold contacts at the battery end with contacts on the phone. If the contacts at the battery are not properly aligned, damage could occur to the phone and the battery. Correct Incorrect 3.To remove the battery, push the bottom of the battery to upwards (1) and remove (2) the battery. Push the SIM card Getting started in the arrow direction as shown. To charge your battery 1. To charge, connect the charger adapter as shown right. Correct Incorrect Correct Incorrect 19