Pentax 105G IQZoom 105G Manual - Page 18

TAKING, PICTURES, Shooting

Page 18 highlights

410 1/F TAKING PICTURES [Shooting distance: 0.65m (2.1ft) - 00 (infinity) ] 1 -+ Turn the power on by depressing the main switch button. 1. Composing the scene After zooming the lens and composing your scene, focus on the subject with autofocus frame. • When the main subject is off the autofocus frame in the center of the viewfinder, use the focus-lock technique. See page 18. 2. Checking the lamp indication Depress the shutter release button halfway down. When the subject is in focus, the green lamp will light up. • The green lamp blinks if the subject is too close or the flash is being charged. 16 Lamp on Blinking • The lamp blinks one of the following rea- sons. 0 The subject is too close. Extend the camerato-subject distance until the green lamp is lit continuously. The flash is being charged. Lift your finger from the shutter release button for a few sec- onds until the flash is fully charged. • If you wish to focus on another subject, lift your finger from the shutter release button , recompose and then depress the shutter button halfway down again. • If the autofocus window is dirty, the autofocus may not function properly.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

410
1/F
TAKING
PICTURES
[Shooting
distance:
0.65m
(2.1ft)
-
00
(infinity)
]
1
-+
Turn
the
power
switch
button.
1.
Composing
the
scene
After
zooming
the
lens
and
composing
your
scene,
focus
on
the
subject
with
autofocus
frame.
When
the
main
subject
is
off
the
autofocus
frame
in
the
center
of
the
viewfinder,
use
the
focus
-lock
technique.
See
page
18.
2.
Checking
the
lamp
indication
Depress
the
shutter
release
button
halfway
down.
When
the
subject
is
in
focus,
the
green
lamp
will
light
up.
The
green
lamp
blinks
if
the
subject
is
too
close
or
the
fl
ash
is
being
charged.
16
on
by
depressing
the
main
Lamp
on
Blinking
The
lamp
blinks
one
of
the
following
rea-
sons.
0
The
subject
is
too
close.
Extend
the
camera
-
to
-subject
distance
until
the
green
lamp
is
lit
continuously.
The
flash
is
being
charged.
Lift
your
finger
from
the
shutter
release
button
for
a
few
sec-
onds
until
the
flash
is
fully
charged.
If
you
wish
to
focus
on
another
subject,
lift
your
finger
from
the
shutter
release
button
,
recompose
and
then
depress
the
shutter
but-
ton
halfway
down
again.
If
the
autofocus
window
is
dirty,
the
autofocus
may
not
function
properly.