Pentax IQZoom 80G IQZoom 80G Manual - Page 13
automatically
View all Pentax IQZoom 80G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
0 0 00 ,0 0+0 C7 ) 2. Place the film cartridge in the film chamber by fitting its flat side on top of the rewind shaft first and then top end into the camera. 3. Pull the film leader out far enough from the cartridge to reach the take-up spool. Align the tip of the film with the film leader end mark 0. 4. Close the back cover. The film automatically advances to the first frame. 0 Notes: • Ensure the film is placed properly between the film guides. • If there is dirt on the film detector 0, film cannot be wound properly. • Ensure the film is taut as illustrated on the il- lustration to the left. Take up any slack in the film by pushing it back into the cartridge. • If the end of the film leader is extremely bent, straighten it or cut off the bent portion. x Slack No ! OFlat Yes ! 9