Pentax ZX-5N ZX-5n Manual

Pentax ZX-5N - SLR Camera - 35mm Manual

Get Pentax ZX-5N - SLR Camera - 35mm PDF manuals and user guides
UPC - 027075042032
View all Pentax ZX-5N manuals
Add to My Manuals
Save this manual to your list of manuals

Pentax ZX-5N manual content summary:

  • Pentax ZX-5N | ZX-5n Manual - Page 1
    PENTAX ZX-5N OPERATING MANUAL PENTAX --, ZX-5N AM. AMOMI6
  • Pentax ZX-5N | ZX-5n Manual - Page 2
    weight camera is an autofocus SLR camera that offers higher levels of sophistication and performance. Incorporating a broad range of advanced technologies and highly accurate automation, this camera will perform superbly for the most exacting photographer. Read this instruction manual carefully
  • Pentax ZX-5N | ZX-5n Manual - Page 3
    NAMES OF WORKING PARTS I \(\ / PENTAX \ 0 Aff 411/J c, O°OO,5 OShutter release button @Main switch (p.19) ©LCD panel (p.6) °Shutter dial @Shutter dial lock button OHot shoe (p.77) OBuilt-in flash (p.37) °Flash
  • Pentax ZX-5N | ZX-5n Manual - Page 4
    . Be particularly careful with the flash around infants. • Never try to disassemble, short or recharge the battery. Also, do not dispose of the battery in fire, as it may explode. • Remove the batteries from the camera immediately if they become hot or begin to smoke. Be careful not to burn yourself
  • Pentax ZX-5N | ZX-5n Manual - Page 5
    water, dirt or dust at points of electrical contact. Also check for battery leakage, traces of dirt or grease, or corrosion due to salinity or gas. If you cannot correct the problems, have your camera inspected at a Pentax service center. Repairs of this nature are not covered under the terms of the
  • Pentax ZX-5N | ZX-5n Manual - Page 6
    conditions as outlined in the "Precautions for Your Camera" section or any other operation contrary to the instructions outlined in this manual, charges will be assessed and a repair quotation will be provided. PRECAUTIONS FOR BATTERY USAGE • Use two 3V lithium batteries (CR2 type). • Misuse of the
  • Pentax ZX-5N | ZX-5n Manual - Page 7
    PRACTICAL SHOOTING GUIDE Focusing Taking a picture when the main subject is not in the Autofocus in strong backlit situations with the main subject in the shadow. p.81 L[id Zooming the lens Making a subject larger or smaller. p.30 Taking pictures of people in various situations Putting
  • Pentax ZX-5N | ZX-5n Manual - Page 8
    Easy to use! (For beginners) 8 Camera functions available with various lenses 10 How to use this operating manual 11 I. BASIC OPERATION (PREPARATION) Attaching the camera strap Loading the batteries • When the battery is exhausted Attaching the lens Using the shutter release button Turning on
  • Pentax ZX-5N | ZX-5n Manual - Page 9
    of F and FA lenses with the built-in flash 74 Setting the film speed (ISO) manually 76 Using a Pentax Dedicated External Flash 77 Camera case 84 Effects of aperture and shutter speed 85 Depth of field 87 About the preview button 88 The infrared index 89 IV. OTHERS Troubleshooting
  • Pentax ZX-5N | ZX-5n Manual - Page 10
    Aperture-Priority AE (p.56) Tv : Shutter-Priority AE (p.58) M : Metered Manual Mode (p.60) : Red-Eye Reduction Flash Indication (p.40) : Flash Information (p.37 : Frame Counter (p.23) O_ : Film Status Information (p.22, 23) : Battery Exhaustion Warning (p.15) : Audible PCV Signal (p.71) 886. : ISO :
  • Pentax ZX-5N | ZX-5n Manual - Page 11
    VIEWFINDER INDICATION • When the format is switched to panorama, the viewfinder switches to the horizontal panorama format frame. For details on panorama format picture taking, see page 53. C J : 3-point AF Frame (p.35) C : Spot AF Frame (p.65) RRp : Shutter Speed (p.55, 57, 59,61) ERR :
  • Pentax ZX-5N | ZX-5n Manual - Page 12
    (For beginners) 1. Loading the batteries 2. Attaching the lens Open the battery chamber cover by using a coin. Load two batteries (CR2 type) according to the markings ( - , ) in the battery chamber. (See page 13.) Align the red indexes on the lens and camera. Turn the lens to the right until it
  • Pentax ZX-5N | ZX-5n Manual - Page 13
    6. Loading film O -n oado."°a° p0000000 9 7. Selecting the Autofocus Mode s MF AF Open the back cover, insert a roll of film, align the end of the film leader with the red mark, and close the back cover. The film should advance to the first frame automatically. (See page 22.) 8. Composing the
  • Pentax ZX-5N | ZX-5n Manual - Page 14
    NED CAMERA FUNCTIONS AVAILABLE WITH VARIOUS LENSES Function Lens [Mount type] Autofocus (Lens only) (Lens with AF Adapter 1.7X) Manual focus (with Fl) *2 (with Matte field) Power zoom Image size tracking Zoom clip Auto zoom effect Programmed AE Aperture-Priority AE Shutter-Priority AE
  • Pentax ZX-5N | ZX-5n Manual - Page 15
    HOW TO USE THIS OPERATING MANUALIIIIIM This manual is organized into the following sections, allowing you to optimize the use of the camera: I . BASIC OPERATION (PREPARATION) Page 12 - 25 ADVANCED OPERATIONS Page 43 - 89 II. BASIC OPERATION (SHOOTING) Page 26 - 42 IV. OTHER INFORMATION Page 90 -
  • Pentax ZX-5N | ZX-5n Manual - Page 16
    (1) ATTACHING THE CAMERA STRAP I BASIC OPERATION (PREPARATION) I . BASIC OPERATION (PREPARATION) Fit the strap on the camera as illustrated. • There is a pocket on the strap so you can store the finder cap, release socket cover, hot shoe cover or any other small accessory as illustrated.
  • Pentax ZX-5N | ZX-5n Manual - Page 17
    using a coin, etc. as shown in the illustration. 2. Load two 3V lithium batteries (CR2) or equivalent as shown in the illustration. • Misuse of the battery can cause hazards such as leak- age, overheating, explosions, etc. The battery should be inserted with the "+" and " -" sides facing correctly.
  • Pentax ZX-5N | ZX-5n Manual - Page 18
    Turn the battery chamber cover screw in the direction of the arrow to lock it securely. • When the battery is replaced, all camera settings remain -in flash. • The optional " AA-Battery Pack FG" is also available for this camera instead of using the lithium batteries. L 4. Set the main switch to
  • Pentax ZX-5N | ZX-5n Manual - Page 19
    100% of the times) Bulb exposure time about 30 rolls about 15 rolls about 5 rolls about 2 hours CR2 batteries were used under Pentax testing conditions. Actual battery life and performance may vary drastically depending on usage of Autofocus, Power zoom and external conditions such as temperature
  • Pentax ZX-5N | ZX-5n Manual - Page 20
    storage, the optional accessory 'Body Mount Cap I' is available. 2. Align the red dots on the camera and lens mount, attach the lens to the camera body, and turn it fully to the right until you hear a click. • Ensure that the camera's main switch is in the OFF position before attaching an FA zoom
  • Pentax ZX-5N | ZX-5n Manual - Page 21
    direction of the arrow. • We assume no responsibility nor liability for damages resulting from the use of lenses made by other manufacturers. • The camera body and lens mount incorporate lens information contacts and an AF coupler. Dirt, dust, or corrosion may cause damage to the electrical system
  • Pentax ZX-5N | ZX-5n Manual - Page 22
    . Depressing it fully (second position) releases the shutter. When taking a picture, depress the shutter release button gently to prevent camera shake. • To prevent camera shake, depress the shutter release button gently. • Before loading a roll of film, slowly depress the shutter release button to
  • Pentax ZX-5N | ZX-5n Manual - Page 23
    (5) TURNING ON THE POWER 19 2 • When not in use, ensure that the main switch is set to [ OFF ]. BASIC OPERATION (PREPARATION) . OE N: OFF 09 • cly OE ON :OFF• Oa O El 1. The power is turned on when the main switch is set to [ ON ]. 2. The power is turned off when the main switch is set to
  • Pentax ZX-5N | ZX-5n Manual - Page 24
    from 25 to 5000. • When DX-coded film is used, the correct film speed is automatically set for the camera. If you use a non-DX coded film, you can set the film speed manually. See page 76. • Before loading film for the first time after purchase, open the back cover and remove
  • Pentax ZX-5N | ZX-5n Manual - Page 25
    BASIC OPERATION (PREPARATION) 3 0 4 O 0 CD 2 3. As shown in the illustration, pull the film leader out only far enough to reach the take - up spool. THE SHUTTER CURTAINS ARE FINE-PRECISION MATERIAL. DO NOT TOUCH THEM WITH YOUR FINGERS OR ANY OTHER OBJECT WHILE LOADING FILM. • If you have pulled
  • Pentax ZX-5N | ZX-5n Manual - Page 26
    I BASIC OPERATION (PREPARATION) Film loaded with slack No! X 0 Film loaded flat Yes! O 0 • If the film is not loaded properly, [ E ] on the LCD panel blinks, indicating that the film is not loaded properly. Open the back cover and load the film once ♦ again. 5 b\. OE ON OFF 09, (J 5.
  • Pentax ZX-5N | ZX-5n Manual - Page 27
    counter counts frame numbers in reverse. • Never open the back cover until the whole film roll is completely rewound. • When removing the film from the camera, protect it from exposure to direct sun light. 2. When the film is fully rewound, only [ 0] blinks on 0 the LCD panel.
  • Pentax ZX-5N | ZX-5n Manual - Page 28
    the film. • A roll of 24-exposure film takes about 13 seconds to rewind. • Before opening the back cover, check that I CI is blinking. • When the camera is not in use, set the main switch to the I, OFF position. • The shutter may be released a frame or more after the specified number of
  • Pentax ZX-5N | ZX-5n Manual - Page 29
    BASIC OPERATION (PREPARATION) (8) ADJUSTING THE VIEWFINDER DIOPTER 2 3 O 00 0 00 4 0 Io 0 U 1. Aim the camera at a bright subject. While looking through the viewfinder, move the diopter adjustment lever to the left or right until the autofocus frame [C ]] appears in the
  • Pentax ZX-5N | ZX-5n Manual - Page 30
    taking, use this mode. In the Programmed AE mode, the camera automatically selects the best combination of aperture and shutter speed setting allowing the aperture ring while holding down the aperture-A lock button on the lens. The lens aperture ring can be released from the A ] position in the same
  • Pentax ZX-5N | ZX-5n Manual - Page 31
    other than an A, F or FA lens is attached, use either center-weighted metering or spot metering. The multi-segment metering mode cannot be set. See page 68 for selecting the metering mode. MULTI(6)-SEGMENT METERING This camera incorporates a high-precision six-segment TTL metering system. Light
  • Pentax ZX-5N | ZX-5n Manual - Page 32
    28 (3) USING THE 3-POINT AF MODE (DNUOONS) NOUN/0d° 3ISYS II This camera incorporates 3-point autofocus system. The subject will be focused properly even if the main subject is slightly off the center of the AF frame. Set
  • Pentax ZX-5N | ZX-5n Manual - Page 33
    - ton is depressed. 0 0 Set the drive mode dial to [ The Consecutive-Frame Mode, Self-Timer Mode and Auto Bracketing Mode are also available in this camera. For details of each drive mode, see page 43.
  • Pentax ZX-5N | ZX-5n Manual - Page 34
    II BASIC OPERATION (SHOOTING) Telephoto (5) USING ZOOM LENSES Using the zoom function makes the subject appear larger (telephoto) or smaller(wide angle) in the viewfinder. Turn the zoom ring to the desired position
  • Pentax ZX-5N | ZX-5n Manual - Page 35
    it to the left makes the subject appear smaller (wide angle). O° 15 5 ft 5 2m PENTAX 28-80 0000 0 DO) \„,,Lioil28 128 6221611 8 5.6 33 11 Using the manual zoom function with an FA zoom lens attached Pull the power zoom ring toward the camera body until the words [POWER ZOOM] are hidden.
  • Pentax ZX-5N | ZX-5n Manual - Page 36
    , depress the shutter release button halfway down to focus the subject. • When the main switch is set to I OFF _ while a Pentax-FA zoom lens is in use, the lens automatically retracts to its shortest physical length. Using the Puwer Zoom Function 1. Push the power zoom ring forward until the words
  • Pentax ZX-5N | ZX-5n Manual - Page 37
    held vertically f For best results, be sure to hold the camera correctly as shown in the illustrations. Hold the camera firmly, with your left hand supporting the camera and lens as shown in the illustrations. While taking a picture, hold your breath and gently depress the shutter release button
  • Pentax ZX-5N | ZX-5n Manual - Page 38
    NOLLYEI3d0 3ISV9 NM (7) SELECTING THE AUTOFOCUS MODE •)))„i "-MP AF vjJ 8 [ • For autofocus operation, set the focus mode switch to AF ]. ▪ 1 When you depress the shutter release button halfway down, the lens automatically focuses. • See page 48 for manual focusing.
  • Pentax ZX-5N | ZX-5n Manual - Page 39
    the photograph. When the shutter release button is depressed halfway down, the lens automatically focuses. 2. When the subject is in focus, the focus indicator up and an audible PCV beeping signal is emitted. • As this camera incorporates 3-point autofocus sys- tem, the subject will be focused
  • Pentax ZX-5N | ZX-5n Manual - Page 40
    release the shutter. • When using the SMC Pentax-F Soft 85mm f/2.8 lens, set the aperture between f/2.8 and f/4.5. See page 52 for details. Predictive Autofocus Mode When the camera senses subject movement during the autofocus operation, the camera will automatically switch the focus mode to the
  • Pentax ZX-5N | ZX-5n Manual - Page 41
    release button is depressed halfway down, the shutter speed and the aperture setting appear in the viewfinder. • When the built-in flash is used, using a lens hood is not recommended as it may obstruct the path of the light coming from the flash, causing vignetting in the picture corners.
  • Pentax ZX-5N | ZX-5n Manual - Page 42
    camera body. • If the built in flash is used continuously, the battery may become warm, but it does not mean the battery is faulty; it is one of the battery 73. • The minimum effective range is always 0.7m (2.6 ft) even if a lens with a maximum aperture f/2.8 or smaller is in use. When a subject is
  • Pentax ZX-5N | ZX-5n Manual - Page 43
    built-in flash is used When using an inappropriate F- or FA- lens, [4] will appear in the viewfinder and [ ] on the LCD panel when the shutter release button is depressed halfway down. For more details on COMPATIBILITY OF F AND FA LENSES WITH THE BUILT-IN FLASH, see page 74. • Taking a picture while
  • Pentax ZX-5N | ZX-5n Manual - Page 44
    2 ll BASIC OPERATION (SHOOTING) A "'At )/ON OFF i Red-eye Reduction Flash Function This camera includes a red-eye reduction flash function, which reduces the red-eye phenomenon utilizing preflash. In this mode, the preflash is discharged just before the shutter
  • Pentax ZX-5N | ZX-5n Manual - Page 45
    . It can be reduced by taking the photo in a brighter light condition or by shooting with a wider angle lens at a closer distance, or by employing the red-eye reduction flash feature. When using a Pentax dedicated flash unit off the camera, it may also help to position the flash as far away from the
  • Pentax ZX-5N | ZX-5n Manual - Page 46
    it is necessary even if the flash is in the popped-up position. The Automatic Flash Function varies depending on the selection of the camera's metering mode and the exposure mode as follows: Exposure Mode Multi-segment Metering Mode Center-weighted Spot Programed AE Automatic discharge in low
  • Pentax ZX-5N | ZX-5n Manual - Page 47
    EL ADVANCED OPERATIONS (1) SELECTING A DRIVE MODE 43 This drive mode has a total of three drive modes as shown. Types of Drive Modes Single-Frame Mode [ 0 ] : One picture is taken each time the shutter re- lease button is depressed. Consecutive-Frame Mode [ chi] : Pictures can be taken
  • Pentax ZX-5N | ZX-5n Manual - Page 48
    Mode rn Consecutive pictures can be taken by holding down the shutter release button. z0 How to set Set the drive mode dial to [ ]. • The camera focuses on the subject frame by frame in this mode. • The shutter cannot be released while the built-in flash is being charged. tn • N. k xN
  • Pentax ZX-5N | ZX-5n Manual - Page 49
    shown in the illustration. * When using accessories such as the Findercap, remove the Eyecup FG. The Eyecup FG comes from the factory fitted to the camera's viewfinder accessory grooves.
  • Pentax ZX-5N | ZX-5n Manual - Page 50
    0•11" 001 •10' 0 • A 0 When the shutter release button is depressed fully. three pictures are taken consecutively as follows. First picture: Correct exposure Second picture: 0.5 EV underexposure Third picture: 0.5 EV overexposure SNOLLVEI3dO O3ONVACIV III 4•%.„ , Auto Bracketing Exposure Mode
  • Pentax ZX-5N | ZX-5n Manual - Page 51
    shutter release button, the dot on the bar graph blinks in the viewfinder to indicates that the camera is ready to take the second picture at any time. • In the Auto Bracketing Exposure Mode, the camera automatically measures the exposure for each shot. • The focus is locked at the first picture and
  • Pentax ZX-5N | ZX-5n Manual - Page 52
    3 D),1 , :41 PENTAX 28-70, MF SO 35 n AF I NM, 1 11 ;il a '1)0 AJ2atalls "4 SNOII.Vii3d0 033NYAaV Using a manual-focus lens When mounting a non-autofous lens with a maximum aperture of f/5.6 or larger (f/1.2 to f/5.6), you can use the manual focus mode to focus the lens with the aid of
  • Pentax ZX-5N | ZX-5n Manual - Page 53
    signal can be canceled. See page 71. • If an old type screw-mount lens is used with an optional Mount Adapter K, the in-focus indicator in the viewfinder on the subject in the manual focus mode with the aid of the matte field in the viewfinder as you would with a non-AF SLR camera. a) The in-focus
  • Pentax ZX-5N | ZX-5n Manual - Page 54
    ".• OF jrn 1 PENTAX 28-701 70 50 35 lens. 2. Set the focus mode switch to [ AF ]. 3. Focus at the point where you wish to capture the subject. 4. Using the optional "Cable Switch F", keep the trigger release button depressed so that the autofocus and metering systems stay active. 5. The camera
  • Pentax ZX-5N | ZX-5n Manual - Page 55
    page 66.) on another subject that is the same distance away, or set the focus mode switch to [ MF ] and use the manual focus mode to focus the lens on the subject with the aid of the matte field in the viewfinder (see page 50). Subjects which may fool the autofocus system
  • Pentax ZX-5N | ZX-5n Manual - Page 56
    Extension Tubes or an Auto Bellows for close-up photography. Note on the SMC Pentax F SOFT 85mm f/2.8 lens When shooting at a distance closer than approx. 1.5m (4.9ft), set the lens to a manual f-stop setting between f/2.8 and f/4.5. A smaller aperture (f/5.6 to f/32) may cause the autofocus system
  • Pentax ZX-5N | ZX-5n Manual - Page 57
    (3) TAKING PANORAMA FORMAT PICTURE 2 SNOLLVH3d0 CBONVACIV ill ML You can switch between the panorama format and standard format picture taking mode in the middle of the roll by moving the panorama lever. The panorama format picture allows horizontally positioned dynamic pictures to be taken (the
  • Pentax ZX-5N | ZX-5n Manual - Page 58
    the processing lab for more details. • Panorama format processing facilities differ depending on the area and requirement. Your local film processor or camera dealers will advise you on all options available to you. • When the panorama format pictures are printed with a standard size format, the
  • Pentax ZX-5N | ZX-5n Manual - Page 59
    PENTAX 28- 50 a. 4' Arts A. *4 a ON OFF 2-66° rg SNOI1V1:13dO CG0NVACIV Using the Programmed AE Mode Purpose The camera automatically button. How to set 1. Set the lens aperture ring to [ A ]. 2. Set the shutter dial to [ A ]. • Turn the lens aperture ring while holding down the aperture-A
  • Pentax ZX-5N | ZX-5n Manual - Page 60
    selected, an appropriate shutter speed is automatically set by the camera for a proper exposure. This mode is ideal for shooting details on the effect of the aperture setting, see page 86. How to set 1. Set the lens aperture ring to the desired f-stop other than [ A ]. 2. Set the shutter dial to [
  • Pentax ZX-5N | ZX-5n Manual - Page 61
    4 SNOLLVIA3dO O39NVACIV III 3. Set the desired f-stop. • When an F or FA lens is used, an approximate aperture indication will appear in the viewfinder when the shutter release button is depressed halfway. When lenses other than an F or FA series are used, no approximate aperture indication will
  • Pentax ZX-5N | ZX-5n Manual - Page 62
    speed is selected, the appropriate aperture is automatically set by the camera for a proper exposure according to the brightness of the subject. on the effect of the shutter speed, see page 85. How to Set 1. Set the lens aperture ring to[ A ]. 2. Set the shutter dial to a shutter speed other than [
  • Pentax ZX-5N | ZX-5n Manual - Page 63
    59 3 SNOLIVH3dO CS0NVAaV III 25o FS.& ON OFF Tv an g _J (ED 3. Set the shutter dial to the desired shutter speed. • When the shutter release button is depressed halfway down, the shutter speed and the aperture value will be displayed in the viewfinder. • In flash photography, when you use the
  • Pentax ZX-5N | ZX-5n Manual - Page 64
    Mode Purpose The Metered Manual Mode is a convenient exposure mode for taking pictures using the same shutter speed and aperture setting combination, or taking creatively under or overexposured photographs. How to set 1. Set the lens aperture ring to the desired f-stop set- ting. 2. Set the shutter
  • Pentax ZX-5N | ZX-5n Manual - Page 65
    contacts is used, use either center-weighted metering or spot metering. The multi-segment metering mode cannot be used. • When using a Pentax A f/1.2 lens with the lens aperture ring set other than the A position, the center O weighted metering mode will be set instead of the z multi-segment
  • Pentax ZX-5N | ZX-5n Manual - Page 66
    for shooting night scenes and fireworks. The shutter remains open as long as the shutter release button is held down. How to set 1. Set the lens aperture ring to the desired f-stop other than [ A J. 2. Set the shutter dial to [ B ]. • Set the shutter dial to the [ B position. Turn the shutter dial
  • Pentax ZX-5N | ZX-5n Manual - Page 67
    using this mode, use a steady tripod to prevent camera shake and attach the optional "Cable Switch F" after removing the Release Socket Cap F. • Up to approx. 8 hours of time exposure are possible with a new lithium battery at room temperatures. SNOIIVEI3dO O3ONVAOV 3. Adjust the desired aperture
  • Pentax ZX-5N | ZX-5n Manual - Page 68
    subject, or compensate for difficult lighting conditions which may fool the camera's built-in exposure meter. How to set 1. Turn the exposure step. • When exposure compensation is used in the Metered Manual Mode, the dots on the bar graph indicate under or overexposure, it is not indicating
  • Pentax ZX-5N | ZX-5n Manual - Page 69
    (6) SPOT AF MODE 65 2 gr Select the Spot AF Mode to critically focus on a specific spot of the subject which is in the Spot AF autofocus frame. How to focus 1. Set the AF mode switch to the Spot AF position LC 3]. 0 0 2. Focus on the main subject with the Spot AF frame CJ indicating in red
  • Pentax ZX-5N | ZX-5n Manual - Page 70
    f 1 FOCUS LOCK FUNCTION In the Spot AF mode, the camera focuses with the Spot AF frame in the center of the viewfinder. If you shoot the composition does not allow the autofocus frame to be placed over the most important subject, the camera will focus on the background as shown in the illustration.
  • Pentax ZX-5N | ZX-5n Manual - Page 71
    in-focus indicator remains on, indicating that the focus is temporarily locked. 3. While holding the shutter release button halfway down, re-aim the camera or recompose the picture, then depress the shutter release button fully to release the shutter. • Lifting your finger off the shutter release
  • Pentax ZX-5N | ZX-5n Manual - Page 72
    MD (7) SWITCHING THE METERING MODE 2 I. ON OFF 0 ;1 p • • o z (ED 0 m The desired metering mode, multi(6)-segment meter ing, spot metering or center weighted metering mode can be selected. 0z Using the Spot Metering Mode fq The Spot Metering Mode measures light only in the small area in the
  • Pentax ZX-5N | ZX-5n Manual - Page 73
    of the pattern (in the center of the o viewfinder) has more sensitivity to light than the 0 lower part. • In this metering mode, the camera does not automati- cally compensate the exposure in backlit situations 0 like the Multi(6)-Segment Metering Mode. The creative exposure will be decided by your
  • Pentax ZX-5N | ZX-5n Manual - Page 74
    occupies only a small part of the viewfinder. • As soon as the memory lock button [ ML ] is depressed, a 10 second timer starts and the camera stores the measured exposure level until the time expires. The memory lock function remains while the momory lock button is depressed. • If the shutter
  • Pentax ZX-5N | ZX-5n Manual - Page 75
    (8) TURNING OFF THE AUDIBLE PCV SIGNAL OM • Change the PCV Signal Mode only when the built-in flash is retracted. If the PCV Signal Mode is switched with the built-in flash popped up, the flash mode will be changed. • To turn the audible PCV signal back on, depress the F multi-function button
  • Pentax ZX-5N | ZX-5n Manual - Page 76
    100 sec. to a slower shutter speed which does not cause camera shake. The slowest shutter speed depends on the focal length of the lens in use. The shutter speed of 1/100 sec. is automatically set when a Pentax non-autofocus lens is in use. Metered Manual Mode • When using the built-in flash in the
  • Pentax ZX-5N | ZX-5n Manual - Page 77
    9m 3.9 ÷ 5 = 0.8m Thus, the flash effective distance is from approx. 0.8m to 3.9m. Calculating the aperture according to the camera-tosubject distance Aperture = Guide Number ± Camera-to-subject distance If the calculated aperture value is different than an indicated f-stop on the aperture ring, for
  • Pentax ZX-5N | ZX-5n Manual - Page 78
    1 : Focal lengths between 28-50mm lens: vignetting will not occur. But, inappropriate lens warning will appear at focal lengths between 24-35mm. * 2 : Vignetting will occur at focal lengths between 2880mm. With the focal length set at 35mm, it will occur when the camera-to-subject distance is closer
  • Pentax ZX-5N | ZX-5n Manual - Page 79
    Lens name FA20mm f/2.8 FA*24mm f/2 F or FA 28mm f/2.8 FA 43mm f/1.9 Limited F or FA 50mm f/1.4 F or FA 50mm f/1.7 FA*85mm f/1.4 F or FA 135mm f/2.8 FA*200mm f/2.8 FA*300mm f/2.8 F
  • Pentax ZX-5N | ZX-5n Manual - Page 80
    4.. °9 El 0eVcA le :O0 112 1 1/2 N 1 1/2 SNOIIVU3dO 0333NVA0V This camera automatically reads the film speed from the film's DX code. However, the film speed setting can be changed. If you use a non-DX coded film, set the film speed manually. How to set 1. To change the ISO to a larger number
  • Pentax ZX-5N | ZX-5n Manual - Page 81
    ) incorporate the TTL Flash Mode. 1. Remove the hot shoe cover FC and attach a Pentax dedicated flash unit. 2. Turn ON the flash. 3. Set the flash unit to the TTL Adapter FG • Off-Camera Shoe Adapter F • Extension Cord F5P (L) HOTSHOE ADAPTER FG OFF-CAMERA SHOE ADAPTER F 5P SYNC CORD F (
  • Pentax ZX-5N | ZX-5n Manual - Page 82
    set to Manual. 0 z • When the flash is charged and left unused for about 3 minutes, the power automatically switches off to save battery power. 1/100 of second to a slower speed which does not cause camera shake. However, when a non-autofocus lens is in use, the shutter speed is set to 1/100 of
  • Pentax ZX-5N | ZX-5n Manual - Page 83
    does not cause camera shake. The slowest shutter speed varies according to the lens focal length. When a nonautofocus lens, the shutter speed is 1/60 of second. Multi-burst flash with the Pentax dedicated flash When discharging more than 2 Pentax dedicated flashes, make sure that they are of the same
  • Pentax ZX-5N | ZX-5n Manual - Page 84
    to the Aperture-Priority AE Mode, Manual or Bulb. The Program and AperturePriority AE Modes cannot be used because the actual required aperture value may change. Using other type of a flash Use of non-Pentax flash units may damage the camera. For the best results, use a Pentax dedicated flash unit.
  • Pentax ZX-5N | ZX-5n Manual - Page 85
    (12) DAYLIGHT- SYNC SHOOTING 81 Without Daylight-Sync Purpose In daylight conditions, when a portrait picture is taken with a person's face cast in shadow, discharging the flash will eliminate the shadow. Daylight-sync photography is obtained in the same manner as normal flash photography, so you
  • Pentax ZX-5N | ZX-5n Manual - Page 86
    Mode set 1. Depress the flash pop-up button to activate the built-in flash. 2. Set the camera's exposure mode to the Metered Manual Mode. 3. Select an appropriate shutter speed (slower than 1/100 of second) and aperture combination for a correct exposure. 4. Release the shutter. • If the aperture
  • Pentax ZX-5N | ZX-5n Manual - Page 87
    (OPTIONAL) 83 SNOIlVil3dO 030NVAOV A number of dedicated accessories are available for this camera. • Cable Switch F A shutter release cord designed for use with the MZ- 5/ZX-5, MZ-5N /ZX-5N MZ-10/ZX-10, MZ- 50/ZX-50, MZ-M/ZX-M, Z-70/PZ- 70,Z-1/PZ-1, Z-20/PZ-20, Z-10/PZ-10. • Magnifier FB
  • Pentax ZX-5N | ZX-5n Manual - Page 88
    the front cover and place the camera body in the back cover. 2. Fasten the back cover to the camera body by tightening the fitting screw in case S,M and L. Front case comes in three sizes, S, M and L Case Applicable F, FA-lens 20mm, 28mm, 50mm f /1.4, f / 1 .7, FishFOS eye Zoom 17-28mm, Zoom 28-
  • Pentax ZX-5N | ZX-5n Manual - Page 89
    ) by intentionally using a slower speed. Choosing a high shutter speed will allow the image of a moving subject to be frozen. A higher shutter speed also helps prevent camera shake. SNOLLVEI3dO CI3ONVACIV III Slow shutter speed
  • Pentax ZX-5N | ZX-5n Manual - Page 90
    -down aperture 4+1. A Open aperture Effect of Aperture The aperture increases or reduces the amount of reflected light from an object which passes through the lens, controlling how much light strikes the film. If the aperture is opened up to increase the amount of light, objects in front of and
  • Pentax ZX-5N | ZX-5n Manual - Page 91
    (17) DEPTH OF FIELD 87 Zoom 28-70mm f/4 lens focused at the distance of 2m with the lens focal length 28mm. SNOLLVLI3dO CI3ONVACIV I" 15 10 F16 F22 Depth as the aperture is closed down, the focal length of the lens becomes shorter, or the subject is positioned farther away. r F4 I F5.6 F8 F11
  • Pentax ZX-5N | ZX-5n Manual - Page 92
    the preview button. Set the main switch to the ON I position and then depress the preview button. • If the lens aperture is set to an f-stop other than 1k position, the camera will close down the aperture you have set while depressing the preview button. • This preview button can also be used
  • Pentax ZX-5N | ZX-5n Manual - Page 93
    19) INFRARED INDEX 89 12 ft 3 m t•61 PENTAX 28-70 35 1J co 12 3 5 ft 1.5 m ..d PENTAX 28-70 70 50 35 28 MINIM AJ2.2 16 To set the proper exposure level for infrared pictures, refer to the instructions accompanying the film. The Programmed AE Mode does not give a correct exposure. Use the
  • Pentax ZX-5N | ZX-5n Manual - Page 94
    IVOTHERS TROUBLESHOOTING What appears troublesome may be easily remedied. Here are some problems that may occur and their remedies. Before contacting a Pentax service center, check the following items. Symptoms Causes Remedios The shutter does not release. The main switch is set to [ OFF ].
  • Pentax ZX-5N | ZX-5n Manual - Page 95
    to Use the focus-lock technique or focus autofocus. manually using the matte field. The built-in flash does not The battery is dead. charge. The power zoom system does The lens is in the manual zoom mode. not function. Replace the battery. Push the power zoom ring forward until the words
  • Pentax ZX-5N | ZX-5n Manual - Page 96
    Speed range: (1)Auto 1 "2000-30 sec.(stepless),(2)Manual 1 =2000-2 sec.(3)Bulb, Lens Mount Pentax K., bayonet mount (K-mount with AF coupler, lens information contacts and power contacts) Compatible Lens Pentax mount lenses. and K -mount lenses are usable. Autofocus is possible using AF Adapter
  • Pentax ZX-5N | ZX-5n Manual - Page 97
    after operation Mirror Quick-return mirror with AF secondary mirror Film Loading TTL Auto Flash (RTF), Guide number:11 (IS0100/m), Illumination angle cov- 0 ers 28mm lens angle of view, Flash- only without batteries Supplied Accessories Hot Shoe Cover F0, Release Socket Cap F, Camera Strap F0,
  • Pentax ZX-5N | ZX-5n Manual - Page 98
    the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any
  • Pentax ZX-5N | ZX-5n Manual - Page 99
    only after you accept the quoted service charge, instruct the service station to proceed with the servicing. The local warranty policies available from Pentax distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with
  • Pentax ZX-5N | ZX-5n Manual - Page 100
    ®@Panorama lever (P.53) Memory lock button (P.70) OFilm information window oPressure plate OBack cover Q Film leader end mark (P.21) OBattery chamber cover screw (P.13) • Battery chamber cover (P.13) %Sprocket (P.21) Op e%DTXri-piondfosrmocakteiot n pin (P.21) eFilm chamber GGoo Go 0005 0
  • Pentax ZX-5N | ZX-5n Manual - Page 101
    MEMO
  • Pentax ZX-5N | ZX-5n Manual - Page 102
    100- 00i4 IAI'AN ( Interne:: Ifwww.pentax.co.jpi) Pentax Europe n.v. Weiveldlaan 1930 Z.aventem. BELGIUM ( Internet www.pentaxeurope.corni) Pentax GmbH. Julars-Vosseler-Strasse, 104, 1.22527 Hamburg. GERMANY ( .'' .'www.pentax.de./) Pentax U.K. Limited Pentax House, Heron Drive, Langley, Slough
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PENTAX
ZX-5N
OPERATING
MANUAL
PENTAX
--,
ZX-5N
AMOMI6
AM.