Pfaff 1211 Owner's Manual - Page 12

A detachable workplate increases your working surface ... Straight-stitch and zigzag sewing jobs The Pfaff 1212 is supplied with a detachable workplate. as shown in the illustration at the bottom (left). This workplate is simply pushed over the free arm until its two guide pins enter the appropriate holes in the machine. To increase the sowing area of your Pfaff 1211 portable, attach the bedplate extension illustrated below. f• pFor 12I: 22 Now see for yourself what your Pfaff can do. Take advantage of the many possibilities this machine offers you in straight and zigzag stitching. Felling Ultra-Matic stitch selector: straight stitch Stitch length: 2 Central needle position Engage Matchmaker foot. Attach felling foot No. 93-040938-31 (can be obtained from your Pfaff dealer). Felled seams are used to loin two pieces of fabric. They are often used on bed linen or children's wear and are made in two operations: First seam: Lay the two pieces of fabric together with their right sides facing and the bottom piece protruding about 4 mm (Va'). Make sure the fabric enters the felling foot evenly. The bottom fabric should be folded over the edge of the top piece. but the top edge must not be folded. Open the two pieces. Second seam: Insert the seam ridge into the felling foot. Stitch it down to the left, starting at the same end as the first seam. Lightly pull the fabric sideways to keep it taught while sewing (Fig.2). 23