Pfaff 1211 Owner's Manual - Page 5

To insert the bobbin into the bobbin case ... Fig.11 Insert the fitted bobbin into the bobbin case, making sure the thread end drops from the top down towards you. Fig.2: Pull the thread into the slot ... Fig.3:...and under the spring. As you draw the thread, the bobbin should rotate clockwise (as indicated by an arrow). Leave about three inches of thread hanging from the bobbin case. 2 3 8 ... and to replace the bobbin case in the machine Lift latch K as far as it will go and push the bobbin case onto center stud S, making sure its slot (see arrow) points upwards. Release the latch and press against the bobbin case until you hear it snap into place. In b 9