Pfaff 645F Owner's Manual - Page 23
Straight, Stitching
View all Pfaff 645F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
STRAIGHT STITCHING Machine Setting - 1 Presser foot Stitch pattern STRAIGHT STITCH Umit lever ] Stitch length Fabric feed Straight stitch zig-zag foot çFree I WA This is the most usual type of stitching. Use either the straight stitch foot for greater control or the zig-zag foot. When using the straight stitch foot, be sure stitch pattern knob is in the straight stitch position to prevent needle from hitting presser foot. Adjust stitch length according to your fabric. Lengthen stitch for heavier fabrics, multiple layers, and thicker seams. Turning a Corner Stop stitching with needle down in fabric. Raise presser foot and turn fabric using needle as a pivot. Lower presser foot and continue stitching in new direction. Reinforcing Ends of Seam Reinforce the beginning and end of seams by backstitching to secure the threads. Begin 10mm from fabric edge and stitch in reverse to edge, then sew forward to end of seam, then back stitch again about 10mm. Reinforce point of dart in same manner. 19 - -