Pfaff 76 Owner's Manual - Page 33
Pfaff 76 Manual
View all Pfaff 76 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Sew the first seam over the filler cord. When the buttonhole is the right length, leave the needle in the fabric on the right of its throw. Lift the sewing foot, turn the fabric around clockwise by half a turn, place the filler cord aroL.!nd the needle and pull it forward, placing it in the left groove of the foo. Lower the foot and take one stitch by hand. Move stitch width control (18) to the second notch, R 2, make 4 or 6 bartack stitches, slightly holding the material to reduce the length of bar. Push stitch width control (18) back to the first notch R 1 and sew the second button hole seam, stopping about /io inch from the end of the first seam. Slightly pull the filler cord and trim it close to the bar (5). Push stitch width control (18) to the second notch R 2 and sew the second tack, slightly holding the material to reduce the length of bar. Flick the stitch width control all the way to the right and make 3 to 4 fastening stit ches. Open the buttonhole with your seam ripper which is included in the accessory box. 31