Pfaff 90 Owner's Manual - Page 41

V I GR £11 Darning GR 056 GR 057 Machine setting A- 0 B-+ Prepare your machine for darning as instructed on pages be set at position I. Place fabric into darning hoop, the 20 and 21. Note that far damaged area being in darning the presser bar the center of the hoop. lifter should Thin Spots Remember nine" and thot "a stitch in reinforce spots time that saves have worn thin lengthwise with and short across stitches made worn section. If fabric is hoops, move clamped into it under the darning needle with both hands. Long rips may normal sewing be darned foot and with the without hoops. Set needle plate in its normal, or sewing, position and use forward- reverse feed control. TriongularTears Triangular tears ore best darned by placing the torn section between hoops across and and making close stitches lengthwise. Move work under the needle with both hands. Small Holes saftfffbDoalhoanyibnabordtrgrrrthntithirccfeiomasasrtatcitmmgotthrcrotiahahhnrsliieoielgsgngsvrh..hetatrhrwMnasFeadigppitanrhgerkshgeeeteomldcdtelhe.eesssdedtueiiTitfradnucrehmnhoggmedmeatn-hscwsbehisazooetwiucenrwnskkireettnihthbcwsroaahutitinlchdehtnehkdseeesare taken right into the good mate rial. 38