Pfaff Tipmatic 1069 Owner's Manual - Page 24

Special sewing feet N Blindstitch foot. Blindstitch guide R is adjusted by turning screw 0. 0 Zipper foot. First insert its rear pin into groove S, then push its front pin into groove T. The zipper foot can be adjusted sideways for stitching along the right or left zipper chain. P Darning foot. Raise the needle bar. Push bracket W toward the back and hold it there. Insert the pin of the foot in hole U and attach the foot so that it rests against its stop. Release bracket W so that it bears against screw X. Tighten screw V. Buttonhole settings Regulate the stitch density in the button hole range of the stitch length control (Q). Press button C (N). Attach the buttonhole foot. Set the upper tension at 3 in the buttonhole range. Insert the filler cord as follows (C): Place it over the rear lug of the foot, pull it taut and clamp it in front lug D. As you sew, arrow E moves along scale F. This serves to determine the buttonhole length. Use a thin thread for sewing buttonholes. 20