Pfaff creative 4.0 Owner's Manual - Page 57
Stitch positioning 21, Stitch length 12, Stitch density 13
View all Pfaff creative 4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Stitch positioning (21) For straight stitches the stitch positioning icon (21) is shown instead of the stitch width icon. Use + to move the needle to the right and - to move the needle to the left. For straight stitches the machine has 37 needle positions. It is possible to change the stitch position of all stitches. Touch the width/position toggle (10) icon to toggle between stitch width and stitch positioning. The stitch position can only be changed to the limit of the maximum stitch width. Changing the stitch position will also limit the stitch width adjustment. 21 12 13 14 10 Stitch length (12) Increase or decrease the stitch length using + and -. If lengthening a zigzag stitch or a decorative stitch, the entire stitch will be longer. If lengthening a satin stitch where the density can be adjusted, the entire stitch will be longer but the density will remain the same. Stitch length - Stitch density (13) The stitch density control adjusts the density (the closeness of the satin stitches that make up the entire stitch). The density does not affect the actual length of the entire stitch. Touch + to decrease the density. Touch - to increase the density. Note: This is often used with specialty threads and when a less dense satin stitch is desired. Stitch density + Stitch length + Stitch density - Sewing mode 4:9