Pfaff creative 4.0 Owner's Manual - Page 88
Select, designs
View all Pfaff creative 4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Embroidery mode - edit Select design(s) When loading designs into embroidery edit, the last loaded design is selected by default. There are two ways to select another design. Either touch it on the screen or step through the designs using the arrows (5). The selected design is outlined in red. Multi-select (4) If you have loaded several designs and want to make adjustments to some of them, you can use multi-select. The mutli-select function allows you to easily select some or all of your loaded designs. Start by touching the multi-select icon (4). A grey marking frame appears that is used as a cursor to highlight, i.e. mark, current design (A). Touch a design with the stylus once to mark it or step through the designs using the arrows (5) to change currently marked design. Touch the design once again or touch the select/deselect icon (6) to select it. To add a design to the group of selected designs to work with, mark another design and then touch it with the stylus or touch the select/deselect design icon (6) to select. A long touch on the multi-select icon will select all designs in the embroidery Àeld. To remove a design from the group of selected designs, mark the design according to above and touch it with the stylus or press the select/deselect design icon (6) to deselect currently marked design. Note: Currently marked design is shown by a grey frame (A). A selected design is shown by a red frame (B). If currently marked design is selected, it is shown by a combination of a red and grey frame around the design (C). Only selected designs will be affected by adjustments. The currently marked design will remain unchanged unless it is selected. When several designs are loaded at the same time, the multi-select function is automatically activated and all of the loaded designs will be selected. 4 5 6 A C B 8:4