Pfaff creative designer Owner's Manual - Page 36
Searching, multiple, stitch, Inserting, adding, stitches, Cancelling
View all Pfaff creative designer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Searching for a multiple stitch • Set the wire cross at the stitch point before the multiple stitch. • Push "memory" key on Designer: The data of this stitch and the stitch number appear in the display. • Write down this data and the stitch number. • Set the wire cross over the multiple stitch. • Press "memory" key again. Now all stitches situated on this matrix point can be selected by pressing the memory key on the Designer. The sought stitch has the next higher stitch number than the number written down before hand. Cancelling stitches see "correction", page 33 To cancel an entire P-memory proceed as fol lows: • Select the P-memory to be cancelled. • Press "mem-" key BL. • Press "mem-" key again and hold it until stitch number 1 appears with a flashing point at the right in the display. The memory is now empty. If the cancelled P-memory is also stored in M memories it has to be cancelled there, too. Inserting and adding on stitches Inserting: • Connect the Creative Designer. • Push "mem-" key 47 BL on the sewing machine. The data of the last entered stitch in a motif appears in the display. • Push keys 5- (stitch count) to select the stitch point before the place you wish to insert a stitch, e.g. if you wish to insert a stitch between stitch 10 and 11 you select stitch 10 with key 5, The new stitch is now stitch 11. All further stitches move up by the number of stitches you insert. Adding on: • Connect the Creative Designer. • Push "mem-" key 47 BL on the sewing machine. The data of the last entered stitch appears in the display. The flashing point at the right in the display before the next stitch number indicates that the computer is ready to receive further stitches. Input the stitches required. If you wish to set stitches at the beginning of a motif, push key 5-until number 1 appears with a flashing point. Now input the required stitches. The stitch numbers of the motif stored before are all moved up by the number of stitches newly input.