Pfaff dorina 75 Owner's Manual - Page 42

Sewing blind hems, Models 75 and 77 Sewing foot Stitch selector Colour code selector:. Stitch length selector:. Attachment zigzag foot white!red 2 to 4 blind stitch hemmer Turn the hand wheel until the feed dog is below the needle plate surface. Lower the sewing foot. Loosen the sewing foot fixing screw in order to place the hem guide between the screw and the sewing foot. Tighten the sewing foot fixing screw and make sure guide A is in the middle of the two prongs of the sewing foot. Place the fabric with the wrong side up and fold the hem over to the required width (No. 1). Fold the fabric over again so that the lower fold protrudes byabout 5mm (5/32) (No. 2). Place the workpiece under the sewing foot so that the double-folded edge is up against the hemmer guide. Lower the sewing foot and sew, making sure the double-folded edge C runs along the guide. Fold the fabric apart. The hem (No. 3) is now finished. A hem No. 1 No.2 No.3 gude B 41