Pfaff expression 2034 Owner's Manual - Page 27
Technica, secUon
View all Pfaff expression 2034 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Technica' secUon Changing the needle Switch off the master switch To remove: Lower the presser foot and set the needle to its highest position. Loosen the needle screw (52) and pull the needle out downwards. To insert: The flat side A of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far A as it will go. Hold the needle and tighten the needle screw (52) firmly. Threading the twin needle: Replace the sewing needle with a twin needle. Insert the second spool holder and place one spool of thread on each of the spool holders. During threading in the left threading slot (34), make sure that you pass one thread each to the left and right sides of tension disk B. Continue threading in the usual manner, making sure the threads do not become twisted together. Pull the threads right and left into the thread guide and thread the needles (for additional details, see "Decorative stitches with the twin needle" p. 85). Note It is not possible to use the integrated needle threader with a twin needle. 31