Pfaff hobbylock 4752 Owner's Manual - Page 18

Threading the left needle (blue) Place the spool on the left spool pin. The guide points for the left needle thread are marked in blue. Two threading diagrams are located behind the looper cover to help you with the threading. Guide the thread from the rear through the left thread guide (1) and both the left holes on the thread guide plate (2). Führung des Nadelfadens guide (5) for the needle thread Fadenführung der Nadelstange thread guid (6) on the needle bar cover of the take-up lever (4) thread tension (3) of the left needle thread Guide the thread from the right between the tension discs and pull the thread tight from both sides. Raise the needle(s) to the high-est position by turning the handwheel towards you. Guide the thread into the takeup lever (4). Feed the thread from the right to the left into the left guide (5) for the needle thread. 16 Feed the thread from the left to the right into the thread guide (6). Feed the needle threading aid through the needle eye from the rear. Then hook the thread end into the needle threading aid and pull the needle threading aid with the thread through the needle eye. Pull on the free thread end until at least 10 cm (4") is showing beyond the needle eye. Lay the thread to the left under the presser foot.