Pfaff hobbylock 4752 Owner's Manual - Page 45
Problem, Cause, Solution
View all Pfaff hobbylock 4752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Problem Cause Solution Fabric not neatly trimmed Waste thread between upper and lower blade. Clean blades. Upper blade is blunt. Replace upper blade (see Page 40). Puckered seams Thread tension too tight. Reduce thread tension. Incorrect setting of differential feed. Re-adjust differential feed (see Page 20) Thread has caught due to incorrect threading. Thread correctly (see Pages 10 - 18). Fabric not fed through evenly Stitches too short. Sewing foot pressure too low for heavy fabrics. Sewing foot pressure too high for lightweight fabrics. Waste thread in the feed dog. Increase stitch length (see Page 20). Increase sewing foot pressure (see Page 21). Reduce sewing foot pressure (see Page 21). Clean the feed dog. Machine will not operate The lead cord/plug is not seated properly in the socket. (see Page 7). The main switch is not switched on. (see Page 7). 43