Pfaff hobbylock 4752 Owner's Manual - Page 20

guide (6 for the needle thread thread guide (7) Feed the thread from the left to the right into the right guide (6) for the needle thread. Feed the thread from the left to the right into the thread guide (7). Feed the needle threading aid through the needle eye from the rear. Then hook the thread end into the needle threading aid and pull the needle threading aid with the thread through the needle eye. Pull on the free thread end until at least 10 cm (4") is showing beyond the needle eye. Lay the thread to the left under the presser foot. Important note on threading The needle(s) must always be threaded last so that the needle threads do not run under the looper thread as seen in drawing 1, but instead over the looper thread as depicted in drawing 2. Should this sequence not be followed, thread breakage or skipped stitches can occur. If the looper threads break, you must pull the needle threads out of the needle eye, rethread the looper thread and then rethread the needle threads. 18