Philips 46PFL3608 User manual - Page 73
USB Memory Stick, Other formats or non-standard signals will not be displayed correctly.
View all Philips 46PFL3608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
The following Video signals can be displayed: Format Resolution VGA 640 x 480 SVGA 800 x 600 XGA 1,024 x 768 WXGA 1,280 x 768 1,360 x 768 FHD 1,920 x 1,080 Refresh rate 60Hz Other formats or non-standard signals will not be displayed correctly. Note(s) ● Please purchase the VGA cable or HDMI-DVI Conversion Cable that has a ferrite core. ● The following operations may reduce noise. - Attach a ferrite core to the AC Power Cord of your PC. - Unplug the AC Power Cord and use the built-in battery of your Portable / Laptop PC. ● Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is recommended for the Better compatibility. ● The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals. ● HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals are Output as Analog (L/R) Audio. ● DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B. USB Memory Stick This unit offers easy playback of Picture (JPEG), Music (MP3) and Video files. Insert the USB Memory Stick into the USB terminal shown below. USB: L p. 24 Note(s) ● The Unit recognizes only a USB Memory Stick. ● Do Not use a USB hub or an extension cable to connect an External hard disk drive to the Unit. (Not Supported.) ● A USB Memory Stick is always inserted to this Unit directly. ● A USB Memory Stick is Not Supplied with this Unit. ● We Do Not guarantee that All USB Memory Sticks can be supported by this Unit. ● Be sure to keep a backup copy of the original files on your Device before you play them back on this Unit. We have no responsibilities for damage or loss of your stored data. ● To protect your USB Memory Stick files from being erased place the write protect sliding tab in the protect position. ● When you are ready to remove a USB Memory Stick, set the Unit to go into Standby mode to avoid any damage to your data and the Unit. ● A USB Memory Stick that requires its own driver or the Device with a special system such as fingerprint recognition are Not Supported. ● This unit is not allowed to use the USB Memory Stick which requires an External Power Supply (500mA or more). 17 .English