Philips CDC735BK User manual - Page 11

CDC735comb 4/9/99 5:39 PM Page 11 11 Playing (cont'd) 1 Turn on your receiver/amplifier and select the audio input to which you connected your Compact Disc Changer. 2 Press the STANDBY-ON button. 5 With the label side up, carefully place the disc in the holder. POWER 5-DISC CAROUSEL CD CHANGER OPEN/CLOSE DISC SELECT PLAY/PAUSE STOP DISPLAY PROG. STORE DISC1 2 3 4 5 SKIP TRACK1 2 3 4 5 6 7 8 9 REPEAT 0 RANDOM H BPLAY/PAUSEF G E CSTOP D 4 Press the DISC SELECT button on the Compact Disc Changer until the desired disc holder moves to the front position. 7 To start playback, press the PLAY/PAUSE button. 8 To stop playback, press the STOP button. 3• Press the OPEN/CLOSE button on the Compact Disc Changer to open the CD com- partment. 6• Press the OPEN/CLOSE button to close the CD compartment. 9• Press the OPEN/CLOSE button to open the CD compartment and remove the disc. NOTES • Do not force the compartment to open or close. You might damage its loading mechanism. • If you use 3-inch CDs, place the discs in the middle of the holders. • After the Compact Disc Changer plays all tracks on the current disc, the Compact Disc Changer automatically loads the next disc and plays all of its tracks. After it plays all tracks on the last disc, playback stops. • Do not touch the disc tray while it is rotating. • Do not load more than one disc into each disc holder. Playing discs Your Compact Disc Changer can play standard 5-inch or 3-inch CDs. Before playing a disc, make sure the Compact Disc Changer and the receiver/amplifier are connected (see 1 Turn on your receiver/amplifier and select the audio input to which you connected your Compact Disc Changer (CD, AUX, or TAPE). 2 Press the POWER button on the Compact Disc Changer. The display illuminates. 3 Press the OPEN/CLOSE button on the Compact Disc Changer to open the CD compartment. 4 Press the DISC SELECT button on the Compact Disc Changer until the desired disc holder (Disc 1, Disc 2, etc.) moves to the front position. 5 With the label side up, carefully place the disc in the holder. Repeat steps 4 and 5 to load more discs. 6 Press the OPEN/CLOSE button to close the CD compartment. The number of the disc in the play position and its total number of tracks appear on the display. Press the DISPLAY button on the remote control to display the total playing time of the disc. 7 Press the PLAY/PAUSE button to play the disc in the play position. Playback will begin with Track 1. 8 Press the STOP button to stop playback. 9 Press the OPEN/CLOSE button to open the CD compartment. Remove the disc and return it to its case.