Philips DCM109 User manual - Page 20

9 Listen to radio Tune to a radio station 1 Press TUN to select FM. 2 Press and hold / for more than 2 seconds. » [SEARCH] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Program radio stations automatically Note • You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold PROG for 2 seconds to activate automatic program mode. » [AUTO] (auto) is displayed. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. Program radio stations manually Note • You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press PROG to activate program mode. » [PROG] (program) blinks on the display. 3 Press ALB/PRESET -/+ to allocate a number (1 to 20) to this radio station, then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat the above steps to program other stations. Note • To overwrite a programmed station, store another station in its place. Select a preset radio station 1 Press ALB/PRESET -/+ to select a preset number. Tip • Make sure the FM antenna is fixed to the main unit. • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. 20 EN