Philips DCM109 User manual - Page 21

English 10 Other features Set the alarm timer This unit can be used as an alarm clock.The DISC,TUNER, USB or iPod/iPhone source can be activated to play at a preset time. 1 Ensure that you have set the clock correctly. 2 Press and hold SLEEP/TIMER. 3 Press DISC , TUN, USB or iPod/iPhone to select a source. 4 Press SLEEP/TIMER to confirm. » The hour digits are displayed and begin to blink. 5 Press / to set the hour. 6 Press SLEEP/TIMER to confirm. » The minute digits are displayed and begin to blink. 7 Press / to set the minute. 8 Press SLEEP/TIMER to confirm. » The timer is set and activated. Note • If the DISC/USB/iPod/iPhone source is selected but no disc inserted or no USB/ iPod/ iPhone is connected, the system will switch to the tuner source automatically. Activate and deactivate alarm timer 1 In the standby mode, press SLEEP/TIMER repeatedly to activate or deactivate timer. » If timer is activated, the display shows . » If timer is deactivated, disappears on the display. Tip • Alarm timer is not available in MP3 LINK mode. • If the DISC/USB/iPod/iPhone source is selected but no disc inserted or no USB/iPod/ iPhone is connected, the system will switch to the tuner source automatically. Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/ TIMER repeatedly to select a set period of time (in minutes). » When sleep timer is activated, the display shows . 2 Press SLEEP/TIMER repeatedly until [OFF] is displayed. » When sleep timer is deactivated, disappears on the display. Listen to an audio player You can listen to an MP3 player through this unit. 1 Press MP3 LINK to select MP3 LINK source. 2 Connect the supplied MP3 link cable to: • MP3 LINK jack (3.5 mm) on the unit • the headphone jack on an external device 3 Start to play the device (see the device user manual). EN 21