Philips DCM250 User manual - Page 24

10 Use more of your Docking Entertainment System Set the sleep timer This DCM250 can switch to standby automatically after a set period of time. 1 When the DCM250 is turned on, press SLEEP repeatedly to select a set period of time (in minutes). » When sleep timer is activated, the display shows [SLEEP](sleep) . To deactivate sleep timer 1 Press SLEEP repeatedly until "OFF" is displayed. » When sleep timer is deactivated, [SLEEP](sleep) disappears on the display. Set the alarm timer This DCM250 can be used as an alarm clock. The DISC,TUNER, USB or iPod is activated to play at a preset time. 1 Ensure that you have set the clock correctly. 2 Press and hold TIMER. 3 Press CD, USB, TUNER or iPod to select a source. 4 Press TIMER to confirm. » The hour digits are displayed and begin to blink. 5 Press / to set the hour. 6 Press TIMER to confirm. » The minute digits are displayed and begin to blink. 24 EN 7 Press / to set the minute. 8 Press TIMER to confirm. » The timer is set and activated. Activate and deactivate the alarm timer 1 Press TIMER repeatedly to activate or deactivate the timer. » If the timer is activated, the display shows . » If the timer is deactivated, disappears on the display. Note • If DISC/USB/iPod source is selected and the track cannot be played, tuner is activated automatically. Listen to an external device You can also listen to an external audio device through this DCM250. 1 Press AUX to select AUX source. 2 Use the AUX cable to connect AUX jack (3.5mm) on this DCM250 and the headphone jack on the player.