Philips FW930 User manual - Page 17

English CD - During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. Reviewing the program Reviewing of the program is possible only when playback is stopped. • Press PREV í or NEXT ë repeatedly to review the programmed tracks. • Press STOP•CLEAR Ç to exit review mode. Playing the program 1 Press PLAY É to start program playback. ™ "PLAY PROGRAM" appears on the display. ™ The track number and elapsed playing time of the current track will appear on the display. • If you press REPEAT during program playback, the current track or all programmed tracks will be played repeatedly. ™ "REPEAT TRACK" or "REPEAT PROGRAM"will be displayed. ™ The REPEAT and PROGRAM flags will be displayed. 2 Press STOP•CLEAR Ç to stop program playback. Notes: - If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM flag also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. - REPEAT DISC mode will be cancelled when program playback begins. Erasing the program (when playback is stopped) • Press STOP•CLEAR Ç. ™ "PROGRAM CLEARED" will be displayed. Note: - The program will be erased when the system is disconnected from the power supply or when the CD carousel is opened. If the CD carousel is opened, the tracks belonging to the outer two trays will be erased and the display will show "TRACKS CLEARED". Shuffle (only on remote control) In shuffle mode, the system plays all the available discs and their tracks in random order. Shuffle may be used also when tracks are programmed. To shuffle all the discs and tracks 1 Press SHUFFLE. ™ "SHUFFLE" will be displayed. ™ The SHUFFLE flag, the disc and the track selected at random appear on the display. • The discs and the tracks will be played in random order until you press STOP•CLEAR Ç. • If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly. ™ "TRACK" or "ALL" will be displayed. ™ The REPEAT and SHUFFLE flags will be displayed. 2 Press SHUFFLE again to resume normal playback. ™ The SHUFFLE flag disappears from the display. Note: - REPEAT DISC mode will be cancelled when shuffle is selected. Repeat (only on remote control) You can play the current track, a disc or all available discs repeatedly. 1 Press REPEAT on the remote control during CD playback to select the various repeat modes. ™ "TRACK", "DISC", "ALL" or "OFF" will be displayed. ™ The REPEAT flag appears on the display. • The selected track, selected disc or all available discs will now be played repeatedly until you press STOP•CLEAR Ç. 2 Press REPEAT until the "OFF" mode is displayed to resume normal playback. ™ The REPEAT flag disappears from the display. Notes: - REPEAT DISC mode is not available during program play or shuffling mode. - You can also repeat shuffling a program. ™ "REPEAT TRACK" or "REPEAT PROGRAM" will be displayed. ™ The REPEAT, PROGRAM and SHUFFLE flags appear on the display. 17