Philips HF3445 User manual (English) - Page 10

Using Your Daybreak Activating a Demonstration Simulation 1 Press and hold SUNSET for 3 seconds. The unit will begin the demonstration with a one minute sunrise simulation and then continue with a one minute sunset. The demonstration will repeat until stopped. 2 Press LAMP to end the demonstration. 1 SUNSET SET WAKE 1 Manual Lamp Operation You can use the Daybreak to turn your lamp on and off for reading or other illumination needs. Your lamp's ON/OFF switch must always remain in the ON position. 1 Press the LAMP button to cycle through four lamp 1 intensity settings: Dim, Medium, Bright, and Off. While the lamp is on, the word INTENSITY will appear on the display. 2 Press the or touch screen buttons to fine tune your desired lamp intensity. 3 After 10 seconds without pressing any buttons, pressing the LAMP button once will turn off the lamp. LAMP DISPLAY SNOOZE / NAP 2 LAMP DISPLAY 2 18 Napping The Nap feature allows you to quickly set an alarm at any time of day, from 10 minutes up to a full hour. 1 Press SNOOZE/NAP. The word NAP will appear on the display. The last nap duration flashes. 2 Press the or touch screen buttons to adjust the nap duration. 3 Press ENTER or wait 10 seconds for the nap timer to begin. The display shows the number of minutes remaining. 4 When the nap timer has finished, the backup alarm will sound. To turn off the alarm, press the SNOOZE/NAP button. 1 SNOOZE / NAP 2 3 SUNSET VOLUME SET WAKE 1 WAKE 2 19 Using Your Daybreak