Philips HTS3372D User manual - Page 20
Turn on Progressive Scan - set up disc
UPC - 609585170100
View all Philips HTS3372D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Turn on Progressive Scan If the TV supports progressive scan output, you can connect this Home Theater System and the TV using component video connection. (see 'Connect video cables' > 'Option 2: Connect to the component video jack'). Video Setup TV System On TV Display Off Screen Fit Picture Setting HDMI Setup Closed Caption Progressive 1 Turn on the TV and ensure that the TV progressive scan mode is deactivated (see the TV user manual). 2 Switch the TV to the correct viewing channel for this Home Theater System. 3 Press DISC. 4 Press SETUP. 5 Press to select [Video Setup] in the menu, then press . 6 Select [Progressive] > [On], then press OK . » A warning message is displayed. 7 To proceed, select [Ok] and press OK. » The progressive setup is complete. Note • If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover. • If no picture displayed, turn off the progressive scan mode as follows: 1) Press to open the disc compartment. 2) Press . 3) Press AUDIO SYNC. 8 Press SETUP to exit the menu. 9 You can now turn on the progressive scan mode on the TV. Note • During play, when progressive scan mode is on for both this Home Theater System and the TV, distorted picture may display. Turn off the progressive scan feature on both this Home Theater System and the TV. 20 EN