Philips HTS3372D User manual - Page 40
Audio Sync], Speakers Delay], HDMI Audio], CD Upsampling], 88.2kHz X2]
UPC - 609585170100
View all Philips HTS3372D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
[Speakers Delay] Sets the delay time for the center and rear speakers if they are placed closer to the listening position, so that the sound output from all speakers reach the listening position at the same time. 1) To start, press OK. 2) Select a speaker in the menu, then press to set the delay time. 3) Press OK to conÀrm and exit. Note • Allow 1ms setting for every 1 foot distance between the speaker and the listening position. [HDMI Audio] Selects the HDMI audio setting when you connect this Home Theater System and the TV with a HDMI cable. • [On] - Allows audio output through the TV and the speaker system. If the audio format on the disc is not supported, it will be downmixed to two-channel sound (linear-PCM). • [Off] - Disables audio output from the TV. The sound is only output through the speaker system. [CD Upsampling] Converts the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. • [Off] - Disables CD-upsampling. • [88.2kHz (X2)] - Converts the sampling rate of the CDs twice as high as the original rate. Note • CD upsampling is only available in stereo mode. [Audio Sync] Sets the default delay time for audio output when you play a video disc. 1) To start, press OK. 2) Select a speaker delay in the menu, then press to set the delay time. 3) Press OK to conÀrm and exit. 40 EN