Philips HTS3372D User manual - Page 21

English Get started Change speaker settings Ideally, the distance between listening position and all the speakers should be the same. If not, change the speaker settings based on their distance from the listening position to obtain the best possible surround sound. Audio Setup Speakers Volume Speakers Delay HDMI Audio CD Upsampling Audio Sync 1 Press DISC. 2 Press SETUP. 3 Press to select [Audio Setup] in the menu, then press . • If the speaker setup option is not accessible, press twice before you press SETUP. To set the speakers level 1 Select [Speakers Volume] in the menu, then press . Speakers Volume Setup Front Left 0dB Front Right 0dB Center 0dB Subwoofer 0dB Rear Left 0dB Rear Right 0dB 2 Press to change the volume level, then press OK. » The test tone is emitted from the speaker. • Repeat the above setting for other speakers until all the speakers output level sounds equally balance. • To exit the menu, press SETUP. To set the output delay time (center and rear speakers only) 1 Select [Speakers Delay] in the menu, then press . Speakers Distance Setup Center 0MS Rear Left 0MS Rear Right 0MS 2 Press to set the delay time, then press OK . • Repeat the above setting for other speakers until the sound output from different speakers reach the listening position at the same time. • To exit the menu, press SETUP. Tip • Set a longer delay time if the center speaker or rear speaker is closer to the listening position than the front speaker. • Allow 1ms setting for every 1 foot distance between the speaker and the listening position. EN 21