Philips MCM196D User manual - Page 15

English Basic Functions MICRO SYSTEM MCM196D IMPORTANT: Before you operate the system, complete the preparation procedures. Switching the system on ● Press STANDBY ON or SOURCE (or 2on the remote control). ➜ The system will switch to the last selected source. ● Press CD, iPod, TUNER, TAPE or AUX on the remote control. ➜ The system will switch to the selected source. Adjusting volume and sound 1 Turn the VOLUME control anti-clockwise to decrease or clockwise to increase volume on the system (or press VOL -/+ on the remote control). ➜ Display shows the volume level VOL and a number from 0-32. 2 Press DSC repeatedly to select the desired sound effect: JAZZ / POP / CLASSIC / ROCK. 3 Press DBB to switch bass enhancement on or off. ➜ Display shows: if the DBB is activated. 4 Press MUTE on the remote control to interrupt sound reproduction instantly. ➜ Playback will continue without sound. ● To activate sound reproduction you can: - press MUTE again; - adjust the volume controls; - change source. To switch the system to standby mode ● Press STANDBY ON on the system (or 2on the remote control). ● If in tape mode or recording mode, press STOP•OPENÇ0 first. ➜ The volume level (up to a maximum volume level of 12), interactive sound settings, last selected source and tuner presets will be retained in the player's memory. To switch the system to Eco-power standby mode ● Press and hold STANDBY ON (y on the remote control) for more than 2 seconds. ➜ The display will go blank. Power-saving automatic standby The power-saving feature automatically switches to Eco power standby 15 minutes after a CD playback has ended and no control is operated. 15