Philips MCM196D User manual - Page 21

English Clock/Timer MICRO SYSTEM MCM196D 6 Press TUNING 4 ¢ to set the minutes. 7 Press SLEEP/TIMER to confirm the time. ➜ The timer is now set and activated. ● To deactivate timer, in timer setting mode, press 9. ➜ disappears from the display. Setting the clock 1 In standby mode, press and hold DISPLAY/ CLOCK (DISPLAY/CLOCK/MENU on the remote control) for 2 seconds. ➜ The clock digits for the hours flash. 2 Press TUNING 4 ¢ to set the hours. 3 Press DISPLAY/CLOCK again. ➜ The clock digits for the minutes flash. 4 Press TUNING 4 ¢ to set the minutes. 5 Press DISPLAY/CLOCK to confirm the time. Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time. ● Press SLEEP/TIMER on the remote control once or more. ➜ Display shows and one of the sleep time options in sequence: 60, 45, 30,15, 0, 60... if you have selected a time. ● To deactivate, press SLEEP/TIMER on the remote control once or more until " 0" is shown, or press STANDBY ON ECO POWER on the system (or 2on the remote control). ➜ disappears from the display. Note: - The backlight for clock display is off in standby. Setting the timer ● The system can be used as an alarm clock, whereby the CD,TUNER or iPod is switched on at a set time.The clock time needs to be set first before the timer can be used. 1 In standby or active mode, press and hold SLEEP/TIMER on the remote control. 2 Press SOURCE (CD, iPod or TUNER on the remote control) to select sound source. 3 Press SLEEP/TIMER to confirm your desired mode. ➜ The clock digits for the hours flash. 4 Press TUNING 4 ¢ to set the hours. 5 Press SLEEP/TIMER again. ➜ The clock digits for the minutes flash. 21