Philips MX5500D User manual - Page 15

WOOFER SURROUND CENTER FRONT SPEAKER SYSTEMS SUBWOOFER SURROUND CENTER FRONT English Connections AUDIO OUT COMPONENT VIDEO IN S-VIDEO IN Pr/Cr VIDEO IN Pb/Cb Y AUDIO OUT COMPONENT VIDEO IN S-VIDEO IN Pr/Cr VIDEO IN Pb/Cb Y 1 L AM R FM ANTENNA C AUDIO VIDEO DIGITAL AUX TV LINE OUT Pr SL OUT IN IN OUT CVBS SR L Pb SUB R DIGITAL IN Y S-VIDEO P-SCAN ON OFF 2 3 RF coaxial cable to TV 2 Back of RF Modulator (example only) INT IN TO TV VIDEO IN AUDIO IN R L CH3 CH4 Antenna or Cable TV Signal L R C SL SR SUB AM FM ANTENNA DIGITAL OUT AUDIO AUX TV LINE IN IN OUT L VIDEO OUT Pr CVBS Pb R DIGITAL IN Y S-VIDEO 1 P-SCAN ON OFF 3 IMPORTANT! - If the picture is distorted, check the Video Output setting. Make sure it is set to 'S-Video,' see page 32. Using S-Video jack 1 Use the S-video cable (not supplied) to connect the DVD system's S-VIDEO OUT jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV. 2 To hear the TV channels through this DVD system, use the audio cables (white/red) to connect TV IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV. 3 Set the P-SCAN switch to 'OFF.' IMPORTANT! - If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator 1 Use the composite video cable (yellow) to connect the DVD system's CVBS jack to the video input jack on the RF modulator. 2 Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV's RF jack. 3 Set the P-SCAN switch to 'OFF.' 13