Philips MX5500D User manual - Page 35

English Setting the digital output Set Digital Output according to your optional audio equipment connections. Follow the steps of "Using the Setup Menu" and select : > Digital Output Digital Output Night mode Analog Output Speakers Speaker Layout PCM Output Set Digital Output Off All PCM only Off Select this to deactivate the digital output. All Select this if you have connected the digital output to an optional piece of audio equipment that has a multichannel decoder. PCM only Select this if the optional audio equipment is not capable of decoding multichannel audio. After that, proceed to "Setting the PCM output." Once you select 'PCM only', the surround mode will automatically change to 'STEREO'. DVD Menu Options Setting the PCM output Set your PCM (Pulse Code Modulation) output only after you have set the system's Digital Output to 'PCM only.' (See "Setting the digital output".) Follow the steps of "Using the Setup Menu" and select : > PCM Output Digital Output Night mode Analog Output Speakers Speaker Layout PCM Output 48 kHz 96 kHz Set PCM output to 48K or 96K 48 kHz Select this if the optional audio equipment is incapable of processing 96 kHz digital signal input. The signal will then be converted to a standard signal with sampling rates of 48 kHz. 96 kHz Select this if the optional audio equipment is capable of processing digital signal input with sampling rates of 96 kHz. However, if the sound output is distorted or there is no sound, select '48 kHz' instead. 33